Used Bending Rolls for sale (9,966)

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t Dcodpfx Asztfxiek Aop

Condition: excellent (used), Year of construction: 2005, Technical specifications: Dcsdpfx Ao Afby Rek Asp Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Hydraulic folding bearing Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Djdpfx Aox Ir Dwek Ascp -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm Dedjyuql Sjpfx Ak Aecp voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm Djdpfjy Ezzyjx Ak Ascp total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Dcjdpozfvvvofx Ak Aop Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 6,0 mm distance between columns 2100 mm roll diam. toproll 180 mm roll diam. bottom roll 160 mm Dcodpsz Ek Auefx Ak Ajp weight of the machine ca. 2,4 t dimensions of the machine ca. 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t Dcodpovx Uvxefx Ak Ajp dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter Dcjdjxacdvjpfx Ak Asp voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Djdpfx Akog Nz T Ie Ajcp Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm Dodpsz Dkzhofx Ak Ascp total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: excellent (used), Year of construction: 2002, Technical specifications: Dcsdpfx Aoittzfjk Asp Working width: 3550 mm Max. bending capacity: 42.0 mm Max. bending angle: 35.0 mm CNC control Diameter of top roller: 480 mm Diameter of 2nd top roller: 540 mm Diameter of side rollers: 480 mm Diameter of central bottom roller: 480 mm Conical bending unit through inclination of the two side rollers Mobile control panel with digital display Hydraulic pivoting bearings Weight: approx. 44 tons Optional equipment: Side bending aid Pivoting bending aid at the top Additional top roller The seller is not liable for typing or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. Dcodpfx Aeyh D Nnsk Aop *

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition Dedoxacfgopfx Ak Ascp With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons Dcodewkaalspfx Ak Aep The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy. Dcodpfx Ash U Rzgsk Aop

Condition: new, Ostas 3-Roll Round Bending Machine ORM 1070 x 130 Special equipment included in the price: Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1070 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness 5.0 mm for pre-bending Roll length 1070 mm Roll diameter 130 mm Weight 1150 kg Dimensions L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Features: Top and bottom roll electrically driven Top roll can be pivoted outwards Taper bending device Dcjdpfoiu Hpfox Ak Aep Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking Values apply to St-37 / 240 N/mm²

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Dodpfxs Ad Nq Ue Ak Aocp

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Djdpfx Akezbcwmj Ascp Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Djdpfxjza D U De Ak Ajcp Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, sheet thickness: 1messurements (LxWxH): 170 x 55 x 110sheet length: 1050weight approx.: 300 Dcsdpfx Ae Agdagok Ajp 3-Roll Plate Bending Machine Dimensions (L × W × H): approx. 170 × 55 × 110 cm Working width: approx. 1050 mm

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends Dodpfxez N Hxhj Ak Aecp - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works Dodpoiwa Hcefx Ak Ascp -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm Dodsxaawgopfx Ak Ajcp roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: Dcedez Dxpmopfx Ak Ajp The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...