Used Berlin for sale (2,560)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 15,868 h, load capacity: 1,600 kg, lifting height: 4,630 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,158 kg, total height: 2,250 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.630 mm Closed height: 2.250 mm Free lift: 1.420 mm Kdsdpfoz Aqhnox Ap Dsu Mast: Triplex (3F463) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (10%) / 18 x 7 - 8 (10%) Service weight: 3.158 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 15.868 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202054 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,171 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 23 x 9 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 4,886 kg, total height: 2,260 mm, total length: 2,600 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-25 – Electric 4-wheel forklift Kdjdpez Aqixjfx Ap Dsu TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.900 mm Closed height: 2.260 mm Free lift: 1.550 mm Mast: Triplex (3F493) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 80V Battery: 80 V 620 Ah v. 2020 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 9 - 10 (25%) / 18 x 7 - 8 (50%) Service weight: 4.886 kg Length: 2.600 mm Width: 1.200 mm Year of manufacture: 2012 Operating hours: 6.171 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309260 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,037 h, load capacity: 2,000 kg, lifting height: 3,770 mm, fuel type: diesel, mast type: telescopic, construction height: 2,350 mm, motor manufacturer: Yanmar, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 6.50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,300 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 1,070 mm, fuel: diesel, motor model: 4TNE 92 NMHA, Equipment: sideshift, YALE GDP 20 SVX V2425 – Diesel forklifts TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 3.770 mm Closed height: 2.350 mm Mast: Standard (2W377) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl.-Diesel Engine: Yanmar 4TNE 92 NMHA Tyres: Superelastik SE 6.50 - 10 (40%) / 18 x 7 - 8 (30%) Service weight: 3.300 kg Length: 2.300 mm Width: 1.070 mm Year of manufacture: 2013 Operating hours: 9.037 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen Kdodpfx Apoz Aqprj Dsu ATTACHMENTS Sideshift Internal no.: 1102803 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 13,447 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,248 kg, total height: 2,121 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.620 mm Closed height: 2.121 mm Free lift: 1.480 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: Dreiphasig 48 V 75 A not tested Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (50%) Service weight: 3.248 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2021 Operating hours: 13.447 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Kdsdpfx Ajz Aqp Ejp Deu Internal no.: 1309227 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,161 h, load capacity: 1,600 kg, lifting height: 2,940 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, battery capacity: 460 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,195 kg, total height: 2,000 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 2.940 mm Closed height: 2.000 mm Free lift: 1.400 mm Mast: Duplex (2F294) Kjdez Aqp Sspfx Ap Dedu Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 460 Ah v. 2019 Charger: ohne / Without Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (50 %) Service weight: 3.195 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2019 Operating hours: 3.161 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309225 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,210 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,470 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, battery capacity: 920 Ah, battery voltage: 24 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,054 kg, total height: 2,120 mm, total length: 1,900 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, LINDE E 15 - 01 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.140 mm Kdodpfez Aqrgjx Ap Dou Closed height: 2.120 mm Free lift: 1.470 mm Mast: Duplex (2F314) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 24V Battery: 24 V 920 Ah v. 2015 Charger: ohne / without Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (90%) Service weight: 3.054 kg Length: 1.900 mm Width: 1.080 mm Year of manufacture: 2010 Operating hours: 6.210 h Condition: working condition EQUIPMENT 3rd valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309250 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2014, Technical specifications: Data format: TIFF or LEN Maximum supported plate size: 1200 × 900 × 1.14 mm Imaging resolution: 2000–4000 ppi Optics: R Optics Maximum screen ruling: 200 lpi Tonal range: 1–99% Optics configuration: Optics 15 Productivity: 1.5 m²/h Dimensions & Weight: Width: 2090 mm Depth: 1168 mm Height: 1223 mm Weight: 1500 kg Electrical Data: Power supply: 1/N/PE, 220–240 V AC Frequency: 50/60 Hz Power consumption: 2.6 kW Kedpfxjz Erivj Ap Dedu Building fuse: 16 A Residual current protection: >30 mA Grounding required Included Equipment: • Exhaust system • Vacuum pump • Compressor • Monitor • Keyboard • Mouse • Built-in software

Condition: used, mileage: 156,025 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 134 MERCEDES-BENZ SPRINTER 315 HIGH + LONG Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF7 Fabric Maturin black Equipment: * 212L Berlin * 9147 Paint color Arctic White MB 9147 * AI1 Control code rear axle ring gear 215 * AR2 Axle ratio I = 3.923 * BH1 Hold function * BH8 Control code hydraulic aggregate variant 7 * BK1 Control code wheel brake configuration 1 * C6L Multifunction steering wheel * C907 - * CB8 Stabilization level II * CL1 Steering wheel adjustable in inclination and height * CW2 Omission of vehicle lowering * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E1E Navigation * E1G Live Traffic capability * E1U USB socket 5 V * E2N Control of Pro features in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors heated and electrically adjustable * F907 - * FF4 Storage compartment above roof liner * FF5 Storage compartment above windshield * FJ4 Storage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * G43 9G-Tronic * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM-defining code) * IT4 3.5-tonner * J10 Speedometer km/h * J58 Seatbelt warning system for driver's seat Kdodpfx Apsz Exu Ss Dou * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage maintenance interval 60000 km * K13 Main tank 71 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L65 Dome light in loading/passenger compartment with door contact * L94 Omission of parking light * LA2 Driving light assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED light strip in loading area * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MJ8 ECO start-stop function * MT2 Emission class Euro 6D-TEMP N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * Q11 Longitudinal member reinforcement * Q67 Towing eye rear * R65 Spare wheel holder under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel rims 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S25 Armrest for passenger seat, center armrest at the rear (FFO) * S87 Driver's seat console, low * SA5 Airbag driver * SB2 Passenger seat comfort * SB3 Driver's seat sprung seat * SK2 Seat occupancy recognition driver's seat * T16 Sliding door right * T77 Grab handle at the entrance of the loading area sliding door on partition * T86 Grab handle on rear corner pillar right * V42 Tie-down rails side wall on bulwark strap * V43 Wooden floor * V94 Cable duct on side wall * V95 Cable duct on rear portal * VA2 Interior lining loading area up to roof height (wood)

Condition: used, functionality: unexamined, Year of construction: 2020, operating hours: 529 h, load capacity: 1,200 kg, lifting height: 4,090 mm, fuel type: electric, mast type: telescopic, construction height: 2,420 mm, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,071 kg, total height: 2,420 mm, total length: 1,860 mm, total width: 790 mm, fuel: electricity, HYSTER S1.2 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.200 kg Lifting height: 4.090 mm Closed height: 2.420 mm Mast: Standard Fork length: 1.150 mm Drive: Elektro 24V Battery: 24V 250Ah Tyres: Polyurethan Service weight: 1.071 kg Length: 1.860 mm Width: 790 mm Year of manufacture: 2020 Operating hours: 529 h Internal no.: 1309308 Location: 14974 Ludwigsfelde bei Berlin Kdedoz Dhfdopfx Ap Dou Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2022, condition: used, Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible. Kodpfx Aszxhlpep Dsdu

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Kedpfxozxhlve Ap Dodu

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Kodpfezxr N Sex Ap Dsdu

Condition: used, Year of construction: 2010, A Yaskawa robot cell for integration with CNC machines or production lines is offered. Robot type: YR-MH00005-E00, axes: 6, max. payload: 5kg, horizontal reach: 706mm, vertical working range: 1193mm, repeatability: +/-0.02mm, robot weight: approx. 27kg, control: Yaskawa DX100. Equipped with pneumatic Schunk gripper, SMC air preparation unit Series AC30 and 4 individual valves from the SY5000 Series. Including safety enclosure, pneumatic tubing, connection wiring, safety door switch and safety relay. The interface for integration with a CNC production machine or production line is prepared. An on-site inspection is possible. Kodpszxr Rvjfx Ap Djdu

Year of construction: 2000, condition: used, Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible. Kdodpfxozybt Nj Ap Dsu

Year of construction: 1995, condition: used, A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible. Kdodszybuaopfx Ap Dou

Condition: used, The machine is a wrapping machine for paper reams, operating principle: electromechanical-pneumatic, max. mechanical speed: 16cycles/min, average format changeover time: approx. 1min, max. roll diameter: 1000mm, core diameter: 150mm, roll width: 600-1600mm, wrapping paper: kraft and poly, wrapping paper grammage: 80-150g/m², roll change time: approx. 3min, processable formats width: 297-1000mm, length: 420-1400mm, max. height: 80mm, min. height with head folding: 25mm, min. height with top folding: 15mm, ream weight: 4-40kg, minimum grammage of paper reams: 60g/m², control: electronic logic control PLC S7/400, connected load: 160kVA, permissible voltage variation: +8%/-5%, control cabinet socket: 220VAC, control cabinet lighting: 220VAC, PLC I/O card inputs and outputs: 24VDC, solenoid valve outputs: 24VDC, supply air pressure: 5bar, air consumption: 700Nl/min, noise level: 80dB(A), with documentation, an on-site inspection is possible, not connected to power, the machine has already been dismantled. Kedpfozybv Rsx Ap Djdu

Condition: used, Year of construction: 1990, Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible. Kdjdpfxozyq Shs Ap Deu

Condition: used, Year of construction: 2021, X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible. Kodpfx Aozyq Szep Dodu

Condition: used, A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement. Kedpfx Apezyq S Ue Dsdu

Condition: used, Three Siemens/Adda electric motors are offered. 1) Siemens 1LA51860BB60-Z, power: 5/18.5kW, weight: 145kg. 2) Siemens 1LA51861BD60-Z, power: 6.5/19kW. 3) Adda DM1 200L6/4L, power: 9/26kW, weight: 248kg. The motors are reconditioned or new. An on-site inspection is possible. Kdedpfx Apozzdyns Dsu

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Kodpfx Aszzqbljp Djdu

Year of construction: 2004, condition: used, Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible. Kdjdpfx Apszzqcvs Deu

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Kdsdpfxszwgide Ap Dsu

Year of construction: 2019, condition: used, Five identical Farmet oil presses are offered. Max. throughput: 24kg seed/h, main drive: 4kW, machine dimensions X/Y/Z: 1700mm/1620mm/1530mm, weight: 235kg. Inspection by appointment is possible. Kdodszww S Aepfx Ap Dsu

Condition: used, Year of construction: 2011, A forklift with side shift is offered. Operating hours: 11065h. Equipped with safety bar, BlueSpot, side shift and telescopic fork arms. Inspection possible by appointment. Kdedpfxoz Hzdre Ap Deu