Used Blade Grinding Machine for sale (65,979)

Condition: good (used), Manufacturer: ELB Type: Perfekt BD15SPS Year of manufacture: 1994 Machine number: 450921194 Table: 2,000 x 600 mm Grinding length: 1,500 mm Grinding width: 600 mm Iodpfezdanusx Abvoic Grinding height: 500 mm Grinding wheel dimensions: 400 x 100 x 127 mm Grinding wheel speeds: 4,000 rpm Accessories: without magnetic separator Condition / Defects: Control panel not original, Handwheel retrofitted separately 2 potentiometers retrofitted Machine weight: approx. 8 tons Machine dimensions: 5,000 x 2,300 x 2,300 mm Control cabinet dimensions: 1,400 x 500 x 2,300 mm

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Isdpsvvkipofx Abvjic

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Iisdpfxewhqpro Abvsc

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Iiodpfswhqplox Abvec

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm Iiodsyb S N Sopfx Abvec thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Iiodsyb S Rijpfx Abvsc max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, Isdpfxeunt Eys Abveic many accessories.

Condition: excellent (used), grinding length 600 mm grinding width 300 mm workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm Iiodpjyyqt Iefx Abvsc total power requirement 4 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,5x1,5x1,8 m

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm Ijdpfxsunt Ege Abvsic clamping length 1000 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: excellent (used), internal diameter 5-200 mm grinding depth 230 mm swing diameter 50 mm Iedpfx Absy D T U Aovsic centre height 180 mm internal grinding diameter 5 - 200 mm spindle bore 50 mm spindle speeds 120 - 1000 mm inclination 90 ° table movement in milling step automatic 3 - 600 mm/min spindle turning speed range 3600 - 40000 U/min spindle diameter 90 mm total power requirement 10 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,1 x 1,6 x 1,8 m

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t Iisdpfx Abjyb S Rcsvsc dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm Iiedpfxjunt Iuo Abvoc max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: good (used), Out of production • Type: XSM945P Iedeq Abyvjpfx Abvjic • Serial number: 20110702 • Glass thickness: 3 – 25 mm • 9 spindles • Minimum glass dimensions: 80 x 80 mm • Year of manufacture: 2011 • Available videos: • Power requirements: 400V, 50Hz, 40A, 20kW • Special price: €4,000

Condition: good (used), With extended roller table Iijdpfeuqlc Njx Abvec • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Isdpfx Abeyxf Ttevjic Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: Fabr,Nr,35274, workpiece weight (max.): 6 kg, grinding length: 250 mm, grinding wheel diameter: 300 mm, total width: 1,500 mm, total length: 1,500 mm, grinding diameter: 100 mm, workpiece weight between centers: 6 g, type of input current: three-phase, workpiece length between centers: 250 mm, grinding wheel width: 30 mm, overall weight: 1,500 kg, input frequency: 50 Hz, input voltage: 380 V, workpiece spindle speed (max.): 1,350 rpm, power: 3.3 kW (4.49 HP), Equipment: documentation/manual, rotational speed infinitely variable, type plate available, 1 Hydraulic external cylindrical grinding machine Overbeck 350 R Year of manufacture: 1972 100 mm center height x 350 mm center distance Workpiece spindle: MK 4 Tailstock: MK 2 Grinding wheel diameter: 300 x 127 x 30 Iijdpfezc R Aajx Abvoc Automatic cycle – rapid traverse before automatic feed – dwell time, rapid traverse back, Automatic dressing and compensation after a pre-set number of parts, Technical data is non-binding – subject to prior sale and errors;

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. Iijdoxzk Niepfx Abvjc -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm Iijdjw Rktbopfx Abvec grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t Ijdpfx Aeu Ng Ncjbvsic dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Technical details: grinding spindle - swivable: ja ° spindle revolutions per minute : 2850 U/min work table:: 50 x 134 x 44 mm table movement: X= 265 mm table movement: Y= 165 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine xH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Iodpfju Ng N Aex Abveic Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: used, Year of construction: 1970, Technical details: Iedex Afpaspfx Abvoic grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm Ijdpfxow Rktzo Abveic grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. Ijdpfx Abju Ngyzovoic - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base Iisdpfou Nggzjx Abvsc i.D. *

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Isdpsu Ng Avjfx Abvjic Documentation i.D. *