Used Bmt for sale (113)

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min Djdjww Nazopfx Afnsun tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm Dedpfxju Hq Rlo Afnoun turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Duedjwq Rpwspfx Afnjn Height: 1970mm Weight: 6100kg

Condition: used, Year of construction: 2021, max. swing diameter over bed 620 mm max. turning diameter 270 mm Max. Turning length 510 mm control Siemens Sinumerik 828D spindle bore 62 mm travel -x axis 200 mm travel -z axis 560 mm travel -y axis 110 (+/- 55) mm no. of tools in turret 16 x tool taper BMT 45 - - - - - Main spindle - - - - - - - - - - - number of spindle speeds 4.500 U/min Djdpfx Aewmgixsfnoun chucking diameter 200 mm --- Subspindle --- - - - - - - number of spindle speeds 6.000 U/min chucking diameter 150 mm CNC Turning- and Milling Center | MTEvo - T22SY equipped with a turret for driven tools, Y-axis, and sub-spindle. Scope of delivery / Accessories: - 7x static holders - 1x vertical driven tool - 1x horizontal driven tool The machine has accumulated only 1,656 spindle hours on the main spindle and 542 spindle hours on the sub-spindle. The machine is in a very well-maintained, like-new condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MTRent - T22SY | T 22 SY | T-22SY | T-22 SY | T22SY

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Dedexdc Suopfx Afnsun Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Equipment: Chip conveyor Electronic handwheel

Condition: used, Year of construction: 2018, Technical details: Djdpfxjvfdvze Afnjun Tool holder type: Weldon 16 mm Tool holder shaft type: DIN 69880 E2-40 x 16 Shank diameter: 40 mm length: 75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar. *

Condition: excellent (used), Year of construction: 2019, Goodway GTZ 2600 Turning-Milling Center Control: Fanuc 31i Main and counter spindle (chuck 210 mm x 2) Dodpfoxk Txrsx Afneun 2 x turret, 2 x 12-position BMT 55 Y-axis Glass scales Spindle hours: 10,000 h.

Condition: new, Year of construction: 2023, Various driven holders BMT 45 and 55, radial and axial, Preziflex mounts, suitable for Doosan CNC lathes. All items available multiple times in stock. Djdswyp A Iopfx Afneun

Condition: new, IMMEDIATELY AVAILABLE! Brand new to the market at a special price: PAVIC HC 10 1T Mini Crawler Excavator ----Available with digging bucket and hydraulic breaker. Key Specifications: * Operating weight: 1,000 kg * Digging bucket capacity: 0.025 m³ / 120 kg * Bucket width: 380 mm * Engine: CHANGCHAI (192FAM) Diesel * Bore x stroke: Single-cylinder, air-cooled * Rated power: 8.2 kW / 3,600 rpm * Main pump: G5-6 * Displacement: 6.8 ml/r * Slew motor: SANYANG (BMRS-250) * Travel motor: SANYANG (BMT-245) * Travel speed: 1.5 km/h * Overall dimensions (L x W x H): 2,775 x 930 x 2,219 mm * Wheelbase: 910 mm * Total track length: 1,230 mm * Platform ground clearance: 380 mm * Rear swing radius: 784 mm * Chassis width: 896 mm * Track width: 180 mm * Chassis ground clearance: 132 mm * Track height: 320 mm Operating Range: * Max. digging depth: 1,650 mm * Max. vertical digging depth: 1,375 mm * Max. digging height: 2,610 mm * Max. dumping height: 1,850 mm * Max. digging reach at ground level: 2,850 mm * Min. swing radius: 1,330 mm * Max. dozer blade raise: 345 mm * Max. dozer blade digging depth: 255 mm Djdpfjxnntfex Afnjun * HT10 1T Mini Excavator * Including hydraulic breaker!!! Financing / hire purchase, as well as leasing / partial amortization leasing available through our leasing partner. For further information, our sales team will be happy to assist. This is a non-binding offer. Subject to prior sale, errors and modifications.

Condition: new, Year of construction: 2025, Z-MaT VT-600M, vertical CNC lathe Controller: Siemens 828D Shop Turn, 15" touchscreen C-axis with hydraulic brake, driven tools Max. swing diameter: 750 mm Max. turning diameter: 600 mm Max. turning height: 600 mm Spindle motor: 15/18.5 kW Spindle nose: A2-11 Spindle speed max.: 2,500 rpm 3-jaw hydraulic chuck without through-hole, 610 mm Turret type: BMT 65 Number of tools: 12, driven Drive power: 4.5 kW Max. speed: 4,000 rpm C-axis (spindle) indexing: 0.001" Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 16 m/min Vertical travel (Z-axis): 600 mm Horizontal travel (X-axis): 450 mm Duedpfx Ajwprtbefnen Machine dimensions: 2,150 W x 3,450 D x 3,300 H mm Net weight: approx. 10,200 kg Standard accessories Full enclosure Electronic handwheel Coolant system Heat exchanger for control cabinet Coolant wash gun / air gun Automatic lubrication system LED work light 3-color status light Leveling bolts and leveling blocks Tools and toolbox Operating manual Flat-bed chip conveyor to the rear with chip cart RS232 interface CE certificate The machine will be exhibited at EMO, Hall 12/D10, and will be available immediately afterwards.

Condition: like new (used), Year of construction: 2017, operating hours: 2,521 h, turning diameter over cross slide: 270 mm, turning length: 510 mm, turning diameter: 270 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 560 mm, MTcut T22SY from MTevo (formerly MTrent) with counter spindle and automatic workpiece transfer. Year of construction 11/2017. few operating/spindle hours Technical data Main spindle chuck size 200 mm Counter spindle chuck size 150 mm Max. Swing-⌀ over bed 620 mm Max. Turning⌀ 270 mm Max. Turning length 510 mm X/Z travel 200 / 560 mm Y travel 110 (± 55) Spindle bore 62 mm Max. Bar capacity 52 (65) mm Main spindle Spindle speed 4,500 rpm Counter spindle Spindle speed 6,000 rpm Number of driven tool positions 16 BMT 45 Tool shank 20 x 20 mm Max. Drilling spindle size 32 mm Machine weight 5,800 kg Djdeqc Tbhepfx Afnsun Control Siemens 828D

Condition: good (used), Year of construction: 2011, machine/vehicle number: NL 201KF3443, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 5,000 rpm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar passage: 73 mm, | Category | Feature | Details | |-----|-----|----- | | General | Year of Manufacture | 2011 | | | CNC Controller | MSX-850 III or M730BM (MAPPS) | | | Number of Axes | 2 | Duodpfxsxgui Re Afnsn | | Dimensions (L x W x H) | Approx. 2700 x 1920 x 2120 mm | | | Approximate Weight | 5400 kg | | Main Spindle | Spindle Nose | A2-6 | | | Spindle Motor Power | 15 kW (20 HP continuous / 26 HP peak) | | | Spindle Speed Range | 50 to 5000 rpm (up to 6000 rpm on some models) | | | Spindle Bore / Bar Capacity| 73 mm / Ø 65 mm | | Axis Travels | X Axis Travel | 260 mm | | | Z Axis Travel | 590 mm | | Turret | Number of Tool Positions | 12 stations (BMT) | | | Tailstock (if equipped) | 564 mm travel, MT4 taper | | Machining Capacity | Max. Turning Diameter | 356 mm (over cross slide) / 366 mm (over bed) | | | Max. Turning Length | 510 mm | | | Swing Over Bed | 755 mm (over cross slide) / 924 mm (over bed) | | Standard Equipment | Chip Conveyor | Yes (optional at base version) | | | Tool Measurement | Renishaw probe (dual-arm possible) | | | High Pressure Pump | Yes | | | Lighting & Signalization | Three-color signal lamp | | | Bar Feeder Interface | For bar loader | | | Coolant Tank Capacity | 235 L | | | Others | Gantry Loader part extractor, MAPPS conversational programming, USB/RS-232 interface | Japanese precision (repeatability < 0.005 mm), robust construction for heavy-duty machining, low maintenance requirements.

Condition: good (used), Year of construction: 2020, CNC Turning and Milling Center Machine type: DMG CLX 450 V4 Control: DMG MORI SLIMline® (19"/ Operate 4.7 on SIEMENS) Year of manufacture: 2020 Spindle hours: 2,548 h TECHNICAL DATA: Max. turning length: 800 mm Turning diameter: 400 mm Max. swing over bed: 650 mm Bar capacity: 80 mm Spindle nose: A2-8 C-axis Speed range: 4,000 rpm Drive power: 25.5 / 17 kW Torque: 426 / 283 Nm Tailstock: Hydraulically movable tailstock via M-function Duodpfowr Aryjx Afnsn Number of turrets: 1 Tool stations: 12 x VDI-40 / 6 x BMT around the turret disc Tool holder: VDI 40 driven tools Speed driven tools: 4,000 Y-axis: 60 mm +/- mm Equipment features: Chip conveyor Electronic handwheel Bar package Tool measurement: measuring arm Parts catcher Bar loader magazine Hydrafeed MV 65