CNC turn-mill center

DMG CLX 450 V4

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1. 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti 2. more than 20 steady tool holders for turning and boring tools by ALGRA 3. 4 bolted tool holders by SAUTER/ALGRA Ibjdpfsvy Iqxox Ad Djd 4. a mechanically operated bar puller toolholder by KINTEK 5. a live center 6. balanced pressure clamping (able to grip thin walled parts) 7. sets plastic drawtubes for bar working in different diametrers 8. more than 50 sets of soft machined jaws 9. 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW 10. SMW special ring for soft jaw turning/machining

Condition: used, Year of construction: 2007, x-travel 1.350 mm y-travel 1.150 mm z-travel 895 mm table diameter 4.590 x 6.990 x 3.150 mmmm handwheel el. tool adaptor HSK-A63 turning speeds 24.000 U/min engine output 38 kW table weight 1.600 Kg 92 fach Iodpfsxddttex Ad Debd Control HEIDENHAIN iTNC 530 a-axis A +16/-120 c-axis 360 ° weight of the machine ca. 14.000 kg dimensions of the machine ca. 4.590 x 6.990 x 3.150 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of manufacture 2014 with IEMCA Boss 332 Type 32C bar feeder, YOM 2014 Büchele chip flushing system Ibedpsw Tkcusfx Ad Dod Reinforced oil pump (special accessory) including spindle flushing Signal lamp High-pressure preparation front and rear included Bearings on the pick-off spindle are new (company Star, invoices available) The machine is still in operation and can be inspected by appointment. Used machines are sold without warranty.

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device Ibsdpfx Aewmf Tpsd Dod - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Ibjdsv Dkb Ispfx Ad Dsd

Year of construction: 2020, condition: good (used), -KOM 3037- An ABUS gantry crane is offered here, which can lift loads of up to 500 kg. This gantry crane also has four cross bridges. Type: free-standing gantry crane system Manufacturer: Abus Year of construction: 2020 Number of cross bridges: 2 Length travel drive: manual by hand Cross travel drive: manual by hand Lifting capacity per crane hoist: 500kg Number of vertical supports: 4 Power supply: trailing cable - lengthways & power rails - crossways Travel paths - usable area Length: approx.: 13,000mm Ibodpfxovw Adno Ad Djd Width: approx.: 8,400mm Hook height: approx.: 3,450mm Room dimensions / external dimensions Length: approx.: 14,100mm Width: approx.: 8,800mm Height: approx.: 5,000mm

Condition: good (used), Year of construction: 2002, Hurco VMX 30, year of construction 2002, Ultimax 4 control unit, Travel X/Y/Z 760/510/610 mm, table size 1020 x 510 mm, 24-position tool changer, spindle speed up to 10,000 rpm, coolant system, electric handwheel, Pocket milling with islands, synchronous thread cutting, 3D contour software, DXF capable, Ijdpfx Adotud Nco Dobd chip conveyor,

Condition: used, Year of construction: 2017, Doosan Puma 2100LY CNC lathe with Y axis Iedpfsw E Iwuox Ad Debd Year of manufacture: 2017 Fanuc i Series with Manual Guide Max turning length: 760mm Max turning diameter: 406mm Chuck: 210mm Samchully Spindle bore: 65mm Tool turret: 12/24 BMT55 Axis travels: X axis – 260mm Z axis – 830mm Y axis – 105mm Tailstock Renishaw probe Included with the machine: - 2 driven tool holders 1/1 - 8 standard tool holders - LNS chip conveyor - Coolant tank with pump - Machine documentation Low operating hours, very good condition

Condition: excellent (used), Year of construction: 2006, 5-axis CNC machining center 2006 Control: Heidenhain iTNC 530 Technical data: x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) Ibodpfxswn A Sle Ad Ded swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Max. tool length 315 mm Max. tool weight 8.0 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Options: Chip conveyor Bar feeder interface Big bore chuck Ibedpjwifkmjfx Ad Djd Memory extension 3-color lamp HP coolant