Used Bodo Gerhard Celle for sale (1,312)

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Fgjdpfx Aexx Avpem Eji • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Fsdpfxoyhc Dyo Am Eogi Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Condition: used, mileage: 168,500 km, power: 331 kW (450.03 HP), first registration: 07/2010, fuel type: gasoline, next inspection (TÜV): 06/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, The Audi RS5 combines sporty performance with everyday versatility. Under the hood, a V8 gasoline engine with 450 hp and all-wheel drive makes this coupe a compelling sports car. The automatic transmission with paddle shifters enables both comfortable and dynamic driving. The complete service history and recent MOT/emission test further highlight the well-maintained history of this non-smoking vehicle. The standard equipment is extensive: Xenon headlights with high beam assistant and daytime running lights ensure optimal visibility, while the panoramic glass sunroof provides an open and airy feeling. The navigation system, DAB radio, and sound system offer modern infotainment. Safety features include blind spot monitoring, lane change assistant, rearview camera, and front and rear parking sensors. The electrically adjustable and heated sports seats with memory function and lumbar support offer high seating comfort in the black leather interior. Fgedpfxsync R Hj Am Eoi * V8 gasoline engine, 450 hp, all-wheel drive with automatic transmission and paddle shifters * Sport package and performance suspension * Panoramic glass sunroof and Xenon headlights with high beam assistant * Electrically adjustable, heated sports seats with memory function * Navigation system, DAB radio, and sound system * Blind spot monitoring, rearview camera, and parking sensors front & rear * Keyless access system and alarm system * Non-smoking vehicle with service history and new MOT/emission test * Almost full equipment, new oil service, new MOT, special equipment: storage package, RS full leather seats, panoramic roof, black headliner, rear window roller blind, Audi music interface, exterior mirrors electrically adjustable, heated, and folding, with automatic anti-dazzle and memory, parking aid front and rear, visually with rearview camera (APS Advanced), driver assistance system: start-up assistant (hold assist), luggage compartment package, top speed 280 km/h, interior: leather silk nappa, interior mirror with automatic anti-dazzle, comfort climate control 3-zone, light alloy wheels 9x20 (5-arm, rotor, titanium look), multi-media interface MMI navigation plus, optics package aluminum matt, panoramic sunroof electric, transmitter for garage door opener (integrated), seats front electrically adjustable (left with memory), special paint ibis white, sun protection roller blind on rear window electric, sound system Bang & Olufsen, sport differential, door armrests in leather, preparation for theft tracking system/location assistant (vehicle tracking system, VTS), preparation for mobile phone/cell phone with Bluetooth interface, Xenon headlights Plus adaptive light (cornering light integrated) Further equipment: Airbag driver/front passenger side, anti-slip control (ASR), Audi drive select, exterior mirror aluminum-look matt, exterior mirror aspherical, left, exterior mirror aspherical, right, exterior temperature display, indicator lights LED in exterior mirror integrated, braking system with recuperation system, brake assistant, through-loading with ski sack, easy-entry, door sill trims with aluminum inlay and lettering, electronic differential lock (EDS), driver information system (FIS) with color display, windshield laminated, cup holders in center console, tailgate with spoiler integrated, tailgate opening automatically, rear lights LED, rear window heating, rear spoiler (electrically extendable), interior: decorative trims carbon, Isofix mounts for child seat, body: 2-door, head airba

Condition: used, This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on its own without cables or software, it needs its laser replaced, otherwise it is in full working condition. The Becton Dickinson FACSCalibur Flow Cytometer offers a unique approach to flow cytometry, allowing users to perform both cell analysis and cell sorting in a single system, providing flexibility for a variety of research and clinical applications. The BD FACSCalibur is a fully integrated multiparameter system that has the performance and sensitivity to ensure objective and reproducible results through the use of dual-laser technology, interbeam compensation, and an alignment-free optical design. Efficient collection optics, coupled to the flow cell with an optical gel, permit the use of a low-powered, air-cooled argon laser and a red diode laser to ensure the Fgodpfx Amsxzg H Re Eei high sensitivity required for analysis of low-density antigens.

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA Fgedpoxzg Nxsfx Am Eei 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Miltenyi Biotec AutoMACS 003 The autoMACS Separator is a benchtop instrument for high-speed automated cell sorting. Employing the MACS Technology, the autoMACS Separator is designed for positive selection as well as depletion of magnetically labelled cells. The autoMACS Separator is operated with pre-set separation programs, thus, allowing optimization of cell sorting approaches according to cell abundance and the intensity of marker expression. The separated cells are immediately ready for experiments, cell analysis, or further subset sorting. Fgodpjxzhhcofx Am Eji

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Fgsdpfjxzh Ddjx Am Eoi

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Fgodpfsy Dt D Dox Am Eji Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Fgjdpfx Ameyb S Dvo Esi - Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket - Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling - Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone - Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity - Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new

Year of construction: 2025, condition: new, Cellophane wrapping machine for larger sized products. - Technical specifications: max. speed of the machine in neutral: 35 cycles/minute; product dimensions (mm): L(110-280)xW(70-150)xH(10-70) - (W+H Fsdpfx Amev Nkw Ts Eegi

Year of construction: 2025, condition: new, Cellophane wrapping machine. Caroussell technology for middle sized products and fast packaging. - Technical specifications: max. speed of the machine in neutral: 100 cycles/minute; product dimensions (mm): L(40-160)xW(20-100)xH(8-45); 380V, 4.5kW; compressed air not necessary; machine dimensions (mm): L2000xW790xH1550; weight (net/gross): 930/1030kg. 1 tool/format included, tear tape dispenser included, infeed conveyor included Fgedpfov Nkxkex Am Eji Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Winkworth PV500 Mixing Tank with Load Cell Weighing Capacity 500 LTS Stainless Steel Fgedpfx Amjwq Sn Us Eoi Jacketed Load weighing Cells With Ancillary Equipment

Condition: like new (used), Year of construction: 2017, 1.0 pcs. Contactless inspection system using a high-performance infrared camera NOXANT, capable of inspecting 400 parts per minute Camera Manufacturer: NOXANT Type: Noxcam640-IMD Year of manufacture: 2017 Technical data sheet available upon request. Fgjdpfx Ajwufpysm Esi Control system: Manufacturer: IMDvista Year of manufacture: 2017 The entire system is installed in a cell from Beck AG, Switzerland.

Condition: good (used), MOM ST22 Liquid filler Fodjqqhqgepfx Am Esgi Stainless liquid filler, mounted on load cell with roller conveyor, Precia Molen digital controls for weighing, height adjustable frame,

Condition: excellent (used), Year of construction: 2014, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2014 Payload: 400 kg Reach: 2550 mm Type: Foundry Plus Working hours: 38982 Condition: Used & Tested Fgedpfxjq Ap Dws Am Esi Cabinet: M2004 Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Please note that the price does not include shipping costs. (Source: ABB's Website)

Condition: used, Year of construction: 2020, Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Technical data  - Capacity: 2 × 1,250 liters - Pressure rating: 2.5 bar - Cooling jacket: Yes - Certification: CE Scope of Delivery  Fgjdpfxowfq Dko Am Eei - 2x 1,250-liter fermentation tanks  

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON Fgedpoxabvkefx Am Eji

Condition: used, This listing is for 1 of 2 Spectramax M2 Microplate readers These units are in full working condition and is ready for immediate use Overview The SpectraMax M2 (and enhanced M2e) from Molecular Devices is a high-performance multi-mode microplate reader designed for flexible detection in life science applications. It combines absorbance, fluorescence, and optional luminescence in a compact benchtop instrument ideal for ELISA, DNA/protein quantification, enzyme kinetics, and cell-based assays. Key Features Fjdpfsxhfzyjx Am Ejgi Multi-detection capability: Supports absorbance, fluorescence (top-read), and with the M2e, adds bottom-read fluorescence, luminescence, and time-resolved fluorescence (TRF). Top- and bottom-read fluorescence: Bottom-read only on the M2e for enhanced cell-based assay sensitivity. Dual-mode cuvette port: Enables standard spectrophotometry outside of microplate format. Dual monochromators: Selectable excitation and emission wavelengths (1 nm increments) without the need for filters. PathCheck® Technology: Automatically normalizes optical pathlengths for absorbance, ensuring accurate, cuvette-equivalent readings. Well volume sensor: Prevents errors from low-volume or uneven well filling. Instrument and software validation: Compatible with SoftMax® Pro software for data analysis and 21 CFR Part 11 compliance, supporting regulated lab environments. Robot compatible: Integration-ready with automation systems and plate stackers for high-throughput workflows. Typical Applications ELISA DNA/RNA/Protein quantification Enzyme kinetics Cell viability and cytotoxicity (M2e preferred) FRET and TR-FRET Luminescence assays (M2e) Low-volume or cuvette-based protocols

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Fgodpfxjxhgawj Am Eji Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Fgjdpfezra Rqex Am Esi Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Fsdpfx Aezxyfzsm Ejgi Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Year of construction: 2021, condition: good (used), functionality: fully functional, Moisture Analysis Device Computrac® Vapor Pro® XL Autosampler Removed from a battery cell manufacturing line Fjdpfx Amjzx S Ets Eogi Automated, chemical-free moisture analysis The Vapor Pro XL (VPXL) Autosampler is an advanced version of the Vapor XL, featuring the latest moisture-specific analysis technology. The VPXL Autosampler offers an automation function for up to 16 samples with individual test profiles. Measurement range (moisture): 10 ppm (10 µg | 0.001%) - 100% Number of samples: Up to 16 Moisture resolution: 1 ppm (0.1 µg | 0.0001%) Weight: 18.6 kg Dimensions: 737 L x 394 W x 208 H mm Results: % Moisture, ppm Moisture, µg Water Data storage: Includes up to 250 test programs, stores the last 1000 test results and the last 100 test diagrams.

Condition: used, mileage: 154,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Loading height approx. 1420mm! Fjdezx Tlzopfx Am Ejgi Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler Fsdpsy Tybnefx Am Ejgi High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Fsdpjzgr Eisfx Am Eogi Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.