Used Boehringer Dus 560 for sale (85)

Condition: used, Year of construction: 2001, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 810 D spindle bore 62 mm spindle turning speed - stepless 3 - 2500 U/min transmission ratio 2 feeds - longitudinal max. 10000 mm/min Lolhccqowcp D Doqshf feeds - cross max. 5000 mm/min tailstock quill taper MT 5 main drive motor 20/30 kW Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m total power requirement 35 kVA weight of the machine ca. 5,3 t Additional information The machine was used in 1-shift operation. Equipment/accessories: * CNC control SIEMENS Sinumerik 810 D * Tool/swivelling holder Parat size 3, Sandvik Capto C4 * Boring rest * Full clamping cylinder Forkardt OKRJ 120 for operating power chucks * Hydraulic unit Hydac * Steady-rest, diameter 20-315 mm * 3-jaw manual chuck, diameter 315 mm * Coolant device * Chip conveyor

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 1,500 mm, turning diameter: 570 mm, center width: 1,500 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 365 mm, turning diameter over top slide: 365 mm, quill stroke: 190 mm, quill diameter: 80 mm, quill travel distance: 190 mm, center height: 280 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, swing diameter over bed slide: 365 mm, spindle speed (max.): 2,500 rpm, center height over cross slide: 183 mm, feed length X-axis: 345 mm, feed length Z-axis: 1,160 mm, total length: 4,000 mm, total width: 2,000 mm, VDF Universal Centre Lathe DUS 560 ti with programmable cycles ex works Austrian machining factory with top maintenance Last maintenance service in 2024 New Filter in 2023 Manufacturer: VDF BÖHRINGER Werkzeugmaschinen GmbH Göppingen Type: DUS 560 ti Year of manufacture: 1999 Installation date: 2003 Technical Specifications Working area Maximum swing over bed: 570 mm Maximum swing over support: 365 mm Maximum turning length: 1500 mm Centre height above flat bed: 280 mm Maximum workpiece weight: 400 / 1000 kg Maximum workpiece clamping length: 1300 mm Main spindle Spindle nose according to DIN 55027, size 8, internal taper 70 Spindle bore: 62 mm Spindle diameter at front bearing: 100 mm Spindle through-hole depth: 200 mm Maximum chuck diameter: 315 mm Speed range: 3 to 2500 rpm Maximum faceplate diameter: 560 mm Maximum faceplate speed: 700 rpm Maximum torque: 1800 Nm Support Z-axis travel: 1160 mm X-axis travel: 345 mm Tool system: Parat-3 Tool cross-section (DIN 770): 32 x 25 mm Tailstock Tailstock adjustment: manual Quill taper: MK5 Quill diameter: 80 mm Quill stroke: 190 mm Control and equipment Control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual: 094.0003.1330-00 Three-jaw chuck: 315 mm Lhjlhowb E U Nsccqqof Faceplate: 350 mm (up to 560 mm with thin parts) Tool turret size 3, Parat, 4-position, manually rotatable (4 x 90°) Chip conveyor from BÜRENER Maschinenfabrik Especially suitable for radius turning

Year of construction: 2001, operating hours: 26,400 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 810 D powerline Additional Equipment Thread pitches: Metric threads (longitudinal, flat, and tapered) mm 0.1-400 This BOEHRINGER VDF DUS 560 ti was manufactured in 2001. A robust horizontal turning machine, it's ideal for training purposes. If you are looking to get high quality turning capabilities consider the BOEHRINGER VDF DUS 560 ti machine we have for sale. Contact us for more information. Application Types Turning Lolhccjv Nry Njqqjhf

Condition: used, Year of construction: 1999, Technical details: turning diameter: 570 mm turning length: 3000 mm tailstock-quill conus: MK 5 spindle head: 8 nach DIN 55027 spindle bore diameter: 62 mm speeds station 1: 3 - 500 U/min speeds station 2: 15 - 2500 U/min Feed speed: längs max. 10 m / plan max 5m m/min. weight of the machine ca.: 6,4 t main drive DC: 20/30 kW : 35 kw dimensions of the machine ca.: 5,83 m x 2,10 m x 1,98 m m Main drive - Siemens speed 8000/min Lolhccewdwi Doqqehf Feed drive X - Siemens speed 3000/min Feed drive Z - Siemens speed 3000/min Coolant pump - Brinkmann speed 2700/min Lubrication pump - Vogel speed 1370/min Coolant 47 l/min. 0.2 bar Noise level according to DIN 45635 - Part 16 80db Coolant pump Main spindle brake Top support with Haase quick-change steel holder Setting vice fixed diameter 20 - 315 mm Moving headstock diameter 25 - 160 mm *

Condition: used, Year of construction: 1997, turning length: 1,000 mm, turning diameter: 570 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, total height: 1,800 mm, overall weight: 4,000 kg, controller manufacturer: NUM, controller model: 1062, machining diameter: 570 mm, space requirement length: 3,400 mm, space requirement width: 1,900 mm, CONTROLS .. CNC Teach In Controls NUM 1062 BASIC FUNCTIONS .. number of x/z slides: 1 .. live positions: no WORKING RANGE TURNING .. swing diameter (max): 570 mm .. turning diameter (max): 365 mm .. worpiece length max.: 1000 mm MAIN SPINDLE .. spindle revolutions (min): 3 /min .. spindle revolutions (max): 2500 /min .. number of gears: 2 .. spindle diameter: 62 mm X/Z SLIDE .. traverse velocity Z (min): 0 mm/min .. traverse velocity Z (max): 10000 mm/min .. traverse velocity X (min): 0 mm/min .. traverse velocity X (max): 5000 mm/min .. tool fixture: Steel Holder TAILSTOCK .. taper: MK 5 ELECTRICAL SPECIFICATIONS .. mains power supply: 35 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3400 mm .. space requirements -front/back-: 1900 mm .. total height: 1800 mm .. total weight approx.: 4000 kg ATTACHMENTS (TURNING) .. tailstock: yes Lholheurca Usccqqof Equipment: - 3 jaw chuck - div. soft jaws Machine is mechanically top but has a control defect (old tube screen, defective)

Condition: used, Year of construction: 2003, turning diameter 570 mm turning length 1500 mm control Manual Plus 4110 Heidenhain swing diameter over face slide 365 mm face travel 345 mm upper slide 125 mm centre height 280 mm drive of main spindle 21/18 kW spindle bore 62 mm spindle head DIN 55027 Gr.8 torque 2000/1700 Nm turning speed range - power take off spindle 5-2.500 U/min feed range - long. and cross 0,01-50 mm/min rapid traverse cross 5 m/min rapid traverse longitudinal 10 mm/min workpiece weight flying clamped 400 kg dimension of workpiece 1600 mm total power requirement 35 kva Lhjlhcevylgdocqqof weight of the machine ca. 5,3 t dimensions of the machine ca. 4,3x2,3x2 m Attention!!! The machine will be delivered with Multifix as a tool holder and not with Capto as shown. three-jaw chuck steady-rest

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Lholjwcp Dwjhccqqsf Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, 1 cycle-controlled universal lathe Make: VDF Boehringer Model: DUS 560 Ti Year of manufacture: 1999 Lolhccqowcru Soqehf Control: Siemens Sinumerik 810 D Technical specifications: Turning diameter above bed: 570 mm Turning length: 3,000 mm Speed range: 3 – 2,500 rpm Spindle bore diameter: 62 mm Weight: 6,400 kg Equipment / accessories: Control: Siemens Sinumerik 810 D Coolant system Main spindle brake Lynette 3-jaw chuck Various tool holders and clamping jaws

Condition: used, Year of construction: 1999, turning diameter 570 mm turning length 2340 mm control SIN 840 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 Lslhccqovxwmaeqjhf spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 4,85 x 2,10 x 2,00 m extended machine bed steady rest chip tray coolant device 4-jaw chuck

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t Lholhccqou Sbkgsqjf dimensions of the machine ca. m

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Control: Siemens Sinumerik 840 MACHINE DETAILS Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz EQUIPMENT Lhjlhccqswa Rnfeqsf - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: not inspected (used), turning diameter over cross slide: 320 mm, turning length: 1,500 mm, Manufacturer: VDF BOEHRINGER Type: DUE 560 Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) There are no dimensions (yet) for this machine. Lhjlhjwc I U Usccqqjf Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 1995, turning diameter 400 mm turning length 2.000 mm control Sinumerik 805 Siemens greates pass round over bed 820 mm swing diameter over face slide 515 mm radial face slide travel 520 mm Upper Slide Travel 250 mm center height over square guideway 400 mm bed width 560 mm longitudinal movement of bed slide 800 mm turning tool - shaft cross cut 40 x 25 mm turning speed range - main spindle 6,3 - 1.600 U/min transmission ratio 2 transmission ratio 1 6,3 - 360 U/min transmission ratio 2 28 - 1.600 U/min power capacity - main spindel 46 / 37 kW max. Torque 5.300 / 4.260 Nm cutting speed 1 - 9999 m/min spindle head Gr. 11 DIN 55 027 spindle bore 128 mm spindle diameter in front bearing 170 mm internal taper -metric 136 metr. face feeds 5 m/min longitudinal feeds: 10 m/min power feed longitudinal 20.000 N power feed coss 12.500 N thread pitch min. 0,1 mm thread pitch max. 400 mm diameter of quill 125 mm quill stroke 280 mm inner taper MT 6 lip angle 60 ° total power requirement ca. 44 kW weight of the machine ca. ca. 8 t dimensions of the machine ca. 5,5 x 2,4 x 2,5 m Lelhccqsv U Dg Eeqehf Cycle controled Lathe VDF BOEHRINGER - DUS 800 / 2000 Operating hours: 400h, spindle hours: 206h, program run: 132h

Condition: used, Year of construction: 1994, Technical details: turning diameter: 570 mm turning length: 1000 mm dimensions of the machine ca.: 3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools Lhelhcowdyx Iscqqsf machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available *

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Lhjlhsv R Hamoccqqof Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 D Spindle bores : 45 mm Turning diam. : 420 mm Turning length : 1000 mm In General: Year of construction:2008 Control:Siemens 840 D Spindle speed:3,000 rpm Turning diameter:420 mm Center distance:1,200 mm Tool turret:8 stations Tool holder:VDI X-axis:420 mm Z-axis:1,000 mm Equipment: Chip disposal:Chip conveyor Lslhcovr Ayxscqqshf Coolant supply:Coolant pump Tailstock:With quill MK 4 Tool holder:Sauter tool turret Chuck:3-jaw chuck

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Lelsv I T I Eehccqqshf Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60% / 100% duty cycle): 19/15 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Toolholder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, standard: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Electrically operated disk tool turret - Internally cooled tool holders - Automatically pivoting tool carrier - 3-jaw chuck - Various tool holders

Condition: good (used), Year of construction: 2012, Manufacturer: VDF BOEHRINGER Type: DUS 400 Ti Control system: Siemens 840D SL Year of construction: 2012 DUS Turning machine for single workpieces or small batch sizes Guideways double Vee Ergonomic designed Optimal protection and safety for operator and environment Parat Tool system 3 Chuck Ø 315 mm Specifications Metric US Standard Lhslhcjt Dkudscqqof Turning diameter bed Ø 420 mm Turning diameter slide 235 mm Turning length 1000 mm Spindle bore 51 mm Spindle power 11 kW Quill 70 Ø Quill stroke 110 mm Spindle holder 4 Mk spindle speed 10 - 3000 rpm Feed X - axis 5000 mm/min. Feed Z-axis 10000 mm/min. Dimensions (estimate) length 3400 mm width 2000 mm height 2200 mm weight 3000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 1993, Condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Lelhccjd Ewaajqqjhf Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years Lhelhsud In Hoccqqof ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Lholhccetud S Ujqqof Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: good (used), turning diameter over cross slide: 365 mm, turning length: 2,000 mm, Manufacturer: VDF BOEHRINGER Type: DUE 560 Year of manufacture: 1995 Feeds in 3 directions 3 Axis HeidenHain Dro X/Z/Zo Multi fix tool system with inserts Housing on back side machine CE-Mark machine Specifications Metric US Standard Turning length 2000 mm Turning diameter bed Ø 570 mm Turning diameter slide 365 mm Spindle bore 62 mm Spindle power 15 kW Bed width Lhslhev Ia H Uoccqqjf 360 mm Quill 90 Ø Spindle mount 5 Mk Speed 2240 Rpm Dimensions (estimate) Length 4500 mm Width 1525 mm Height 1389 mm Weight 4500 kg Please note: The information on this page has been provided to the best of our knowledge and belief by us and, as far as possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Lelhefmd Dhsccqqshf Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm Lhjlhjuap Uaoccqqof turning diameter 630 mm The machine is in very good condition and is very well maintained

Year of construction: 2007, Condition: ready for operation (used), Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available. Lslhccor Nd Ekjqqehf