CNC lathe cycles

VDF BOEHRINGER DUC 560

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA Hfsdpfxjv R Hamj Ahyjb EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 Hodpfxexp Hmao Ahyjfb 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Hodpfxew D Ayno Ahysfb

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood Hedouxmt Tspfx Ahyofb grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Hjdpfx Aorfx Tnohyjfb Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system Hodpeiw Dlkofx Ahyofb - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 6000 ; 6000 W CONTROL UNIT: ByVISION Hfsdpowwxuzefx Ahyjb ACCESSORIES: PORTABLE HANDWHEEL ; FUME EXHAUSTER NOTE: WITH SYSTEM ANTIL SPA 4020 yom 2021

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Hedpfxjv Drige Ahysfb Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Hjdoixntwspfx Ahyofb Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Hfjdpfx Aewglfxohysb Infrared probe for workpiece measurement