Used Boring Hell for sale (4,911)

Condition: used, Technical details: table length: 2000 mm Cjdsu N D Szepfx Afnopu table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm Codpfxou N D Sbe Afnjpu table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t Cpsdpfx Afju N Ebdonou machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display Cpjdjv A S Efepfx Afnju *

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Codpfxex Rhlcs Afnspu Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck tool clamping range: Ø 0 - 20 mm spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Cedpfx Afeih H A Renjpu Declaration of Conformity Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant Cjdpfx Afor Eli Tonjpu GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Cpjdpfjv Trlmox Afnju Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) Cpodpew Sgm Hefx Afnou - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Cpodpfsxdttiox Afnou - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Cpedpfeu Agzxjx Afnou Subject to prior sale,

Year of construction: 1991, condition: excellent (used), Frommia long hole drilling machine Type: 770 drill holder : drill chuck with key Cpodpelc Eurofx Afnsu max. drill diameter : 1 - 20 speeds : 2900 rpm max. drilling depth : 145 mm operation : two-hand operation of height adjustment : hand wheel reading of height adjustment : scale clamping cylinder actuation : hand eccentric types of construction : movable drilling head table width : 560 mm table depth : 300 mm working height or feed table height : 900 mm weight approx. : 220 kg dimension : 1200 x 900 x 1200 mm Motor power : 1.5 kW power supply ca. : 400V / 50 Hz / 4.8 A / 2,2 kW Accessories : some drills Location : ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Cpsdexgu Uaspfx Afneu Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle Cpedpfx Asx Rqk Uofnou - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: excellent (used), Blum hardware hinge drill Minipress Number of drills 5 Mounting of drills with quick couplers Motor power 0,75kw Pneumatic pressure Pneumatic stroke of the aggregate Maximum thickness of workpiece material 40mm Cedpfx Afjuz Tc Hsnepu

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 1,120 mm, table load: 3,000 kg, spindle speed (max.): 1,150 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine underwent a complete overhaul of its mechanical parts in 2025. Ground guideways and work table, new ball screws, replacement of all bearings, geometric protocol. Spindle diameter 100 mm, spindle taper ISO 50. Heidenhain TNC 360 control system. Controlled axes X, Y, Z, B, circular interpolation possible. Cjdpsyctk Tsfx Afnepu

Year of construction: 1986, condition: used, Technical details: core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW Cpsdpfxew Dz Taj Afnju weight of the machine ca.: 6 t

Condition: used, Used machine Equipment and technical data: - Double-sided line boring machine - 2 drilling motors, each 1.8 kW, with oil brake cylinder - Stroke max. 130 mm - With pneumatic directional control valve - 21 spindles, spindle pitch 32 mm - Max. drilling distance 640 mm (by moving the workpiece up to 2656 mm) Cjdpfjwlwpgex Afnopu - Portal clearance 850 mm - Air consumption at 5 bar approx. 11 l per cycle - Extraction nozzle 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Storage location: 63934 Röllbach

Year of construction: 2019, condition: used, functionality: fully functional, MAKE: Bragonzi MODEL: 110 CNC CATEGORY: Retrofitted Boring Machine RETROFIT YEAR: 2019 CNC CONTROL: Siemens 840D MACHINE WEIGHT: 28,000 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 4,100 mm Total Connected Load: 45 kW Spindle Boring Spindle Diameter: Ø 110 mm Spindle Nose (mounting type): ISO 50-7388/1 – DIN 69871, double drive keys Milling Cutter Mounting Diameter: Ø 221.44 mm Speeds and Feeds Continuous Spindle Speed Range: 15 – 596 rpm 50 – 2,000 rpm Spindle Motor Power: 22 kW Feed Rate X / Y / Z / W axes (infinitely variable): 2 – 5,000 mm/min Rapid Traverse X / Y / Z / W axes: 10,000 mm/min Axes Travels X Axis (longitudinal): 2,500 mm Y Axis (vertical): 1,500 mm Z Axis (transversal): 1,300 mm W Axis (quill): 550 mm Rotary Table Usable Pallet Dimensions: 1,040 x 1,350 mm Maximum Load: 4,000 kg Max. Rapid Rotation Speed: 3 rpm Tool Magazine Tool Magazine Capacity: 60 stations Tool Holder Type: ISO 50-7388/1 taper Max. Tool Diameter with Adjacent Stations (occupied/free): Ø 138 / Ø 280 mm Max. Tool Length (without taper): 400 mm Max. Tool Weight: 25 kg Machine complete with accessories Cpedpfeyb Rqzox Afnsu

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg Cpedpsx Nrhrsfx Afnou - immediately available -

Condition: excellent (used), Year of construction: 1988, Gebr. Panhans Mortising Machine Type: 116 - School Model - Dowel hole drilling unit: pitch 16, 22, 25, 32 mm Two-lever operation Cpsdpfsx Nrg Uex Afnsu Mitre angle stop Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm 2 hold-downs: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2007, Gebr. Hess LLB 300 slot mortising machine – school model – Cpsdpex Nrguefx Afnou Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 1.5 – 1.9 kW Motor speed: 2800 rpm Chuck mount: 20 mm Table size: 600 mm x 320 mm Pressing system: 2 eccentric levers Weight: 246 kg 1 piece 2-speed motor 1400/2800 rpm 1 piece stop gauge 90° 1 piece horizontal drilling grid system with 4 rows of holes: 16, 20, 22, 25 mm; with Bowden cable control 2 pieces eccentric pressers with column Single-lever operation Location: ex stock 54634 Bitburg – immediately available –

Condition: as good as new (ex-display), Year of construction: 2026, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE, CE-certification Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Headstock vertical travel Y 1100 / 1250 mm Table longitudinal travel Z 1000 mm / 1250 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - Hydraulic system (unit, pumps, hoses, fittings) - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Csdpopdrzzsfx Afnspu Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 + Heidenhain Options nr. 8, 19 and 20 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis Options - Through spindle coolant - CE certificate for the machine - Safety fence and operator cabin with sliding door, - Automatic tool changer TOS Varnsdorf AVN 40 - Heidenhain TS 460 radio touch probe + receiver - Dismantling of the machine, packaging and loading - Machine installation - Extension of the 12-month warranty by a further of 12 months

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor type CNC boring machine YEAR OF MANUFACTURE: 1997 CNC CONTROL: Siemens Sinumerik 840C Spindle Spindle taper: ISO 50 Spindle diameter: Ø 160 mm Spindle speed range: 2 ÷ 1,600 rpm Spindle motor power: 100 kW Coolant through spindle (CTS) Work Capacity Cpodpfx Afjyari Asneu X axis (column longitudinal travel): 13,000 mm Y axis (head vertical travel): 5,000 mm Z axis (head cross travel / RAM): 1,000 mm W axis (quill travel): 1,200 mm V axis (table cross travel): 3,000 mm RAM section dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary table dimensions: 4,000 x 4,000 mm Rotary table load capacity: 80 t Continuous rotary table positioning: 360,000 positions, minimum indexing angle 0.001° Number of floor plates: 2 Each floor plate size: 6,000 x 2,500 mm Total floor plate dimensions: 6,000 x 2,500 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing 2.5° (C axis) Spindle oil chiller and hydraulic unit Manuals and electrical diagrams

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and technical data: - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid feed system, eliminating the need for tedious cranking - Smooth and stepless movement of the drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable using scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large, high-quality cast iron table with ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Drill head swivel range: -60° to +60° - Drill table size: 595 × 315 mm Codexllwcepfx Afnjpu - Table extension: 2 × 200 × 220 mm - Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: short-term Location: Flörsheim