Used Bottle Washer for sale (2,599)

Year of construction: 1986, condition: used, Manufacturer : Saint-Gobain Desjonqueres Model : Debalpack 800. Type : Unpacker of bottles under film. Year : 1986 Saint Gobain accumulation table Introduction of the pack in automatic Iodpfx Acozg I Utslsif Automatic pack opening Automatic bottle transfer Automatic film evacuation Automatic film ejection History, documentation, and electrical diagrams available.

Condition: ready for operation (used), inner diameter: 1,500 mm, inner dimension height: 900 mm, pressure: 4 bar, temperature: 90 °C, load capacity: 800 kg, operating pressure: 4 bar, For sale: a spray washing machine from the Finnish brand Aqua Clean. The entire unit is made of acid-resistant steel and additionally insulated. The washing area has a diameter of 150 cm and a height of 90 cm. The machine allows for setting the working time and temperature up to 90°C. Spraying is performed from below, from the side, and from above under a pressure of 4 atmospheres. The pump has had its seals replaced with Viton seals, which are resistant to harsh chemicals. It also features an exhaust fan for removing fumes. The load capacity is 800 kg. A video demonstrating the machine in operation is attached to the advertisement. Transportation is possible throughout the EU. Iedpfx Ajzgx H Tsclsif

Condition: excellent (used), I'm selling a lightly used spray washer from the Danish company Compact, model 1000-H. The machine is ready to work without leaks. We can work on site or send a video. The raised version, which is standard 70 cm high, is 100 cm above the basket. The version is made entirely of stainless steel and is additionally insulated. It sprays from the bottom, top, and side. Adjustable operating time and temperature. The basket diameter is 100 cm. The tank holds 330 liters. It weighs 800 kg. It has a 500 kg load. It has a steam extraction fan. Possible transport within the EU Iijdpfx Acszqd Tyelsf

Year of construction: 2009, condition: used, functionality: fully functional, 1 x Lavamac washer extractor. Model LH1200 Year of manufacture 2009 Iijdpfx Aezlknteclef

Year of construction: 1991, condition: ready for operation (used), A linear container unscrambler for the automatic singulation, upright positioning and feeding of plastic containers is available. Operating speed range: approx. 80containers/min, max. container volume: 1000ml, discharge height range: 850mm-1050mm, machine dimensions X/Y/Z: approx. 2600mm/1500mm/2300mm, weight: approx. 1200kg. The plastic bevel gear for adjustment is defective. An on-site inspection is possible. The term bevel gear is the established engineering translation of Kegelrad. Ijdpfeznx Iyjx Acleif

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz Iiodpozb Rmvofx Aclsf * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces All bottles are complete, empty and ready for export. Iijdpfx Aceyfpg Nolof

Condition: used, Crane Hook/Pulley - lifting capacity 10 t - weight approx. 190 kg Iijdpfxju Nvlgo Acljf - pulleys Ø 500mm; width 58mm; rope groove 40mm - cargo hook length 420mm; hook opening 90mm; intake 110mm with safety device Only one crane hook/pulley left on sale! *

Condition: used, Year of construction: 1984, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! Iiodpfx Acsu Nv Ubjlef *

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Iijdpfx Acjyxpqcelef Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Filling volume: 5 ml - 5,000 ml Capacity: 30 - 100 bottles per minute Iedpfx Aszfpq Tscloif Suitable for pharmaceutical, chemical, and food products.

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Iodpjyv Addefx Acljif Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system Ijdpezhl Hpsfx Acleif

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel Iijdev Di Dnspfx Aclef • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Cleaning Cabinet Washer The 140L parts cleaning cabinet washer is a professional workshop device designed for effective removal of oils, greases, deposits, and stubborn contaminants from metal and mechanical components. Operating in a closed-loop system, the machine uses cleaning fluid efficiently and economically. Thanks to its large tank capacity and stable construction, it is an ideal solution for industrial plants, workshops, and service facilities. Main advantages of the 140L workshop parts washer Maximum cleaning fluid capacity: 90 liters – allows long, continuous operation without frequent refilling of cleaning agent. Pump flow rate of 2.7–3.6 l/min – ensures precise cleaning of hard-to-reach areas and surfaces with micro-cracks. Large 140-liter tank – enables cleaning of larger machine and equipment components. Closed-loop fluid circulation system – economical use of cleaning liquid, reduced waste, and a cleaner working environment. Automatically locking lid – ensures safe operation during cleaning processes. Stable four-leg construction – provides optimal working height and safe operating conditions. Practical working shelf under the tank – convenient space for drying parts or storing tools. Design and technology The parts washer is equipped with a flexible hose with a spray nozzle, through which the cleaning fluid is delivered under pressure from the bottom of the tank. To ensure optimal performance, the pump inlet must remain completely submerged. The tank lid opens smoothly and locks automatically, increasing operator safety. The robust frame and four supporting legs provide excellent stability, even during intensive use. Ijdpfx Aorh Ey Rscleif The well-thought-out design and compact dimensions (1130 x 540 x 885 mm) allow the unit to fit into most workshop spaces while providing a large working area for cleaning bigger components. Precision and cleaning efficiency The high-performance pump, with a flow rate of up to 3.6 liters per minute, combined with the closed-loop system, enables continuous and efficient operation with minimal fluid consumption. The cleaning solution penetrates even microscopic gaps, allowing thorough removal of contaminants from metal, cast iron, steel, and aluminum parts. The machine is designed for use with water-based detergents – cleaning effectiveness depends on the type and quality of the cleaning agent used. Applications The 140L parts cleaning cabinet washer is designed for professional applications in: automotive workshops, repair and maintenance services, mechanical workshops, manufacturing facilities. It is suitable for cleaning: machine parts, tools, engine components, hydraulic system elements, technical components requiring thorough cleaning before regeneration, repair, or assembly. Standard equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Working shelf underneath the tank Assembly and operating manual Technical specifications Parameter Value Tank capacity 140 L Maximum cleaning fluid volume 90 L Maximum pump capacity 2.7–3.6 l/min Power supply 230 V External dimensions 1130 x 540 x 885 mm Working tray dimensions 800 x 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP180 Pressure Cabinet Washer is an industrial cleaning device designed for washing heavily contaminated mechanical, metal, and industrial components. Thanks to pressure cleaning technology and a stainless steel construction, the machine provides high durability, efficiency, and safe operation even under demanding working conditions. The closed-loop system and the ability to heat the cleaning fluid up to 70°C enable effective removal of grease, oils, carbon deposits, and other stubborn contaminants. Main advantages of the MP180 washer Closed-loop system with heated cleaning fluid – improved removal of difficult contaminants at temperatures up to 70°C. Pressure up to 8 bar – effective cleaning of hard-to-reach areas and heavily contaminated components. High-quality stainless steel construction – corrosion and mechanical damage resistance, ideal for long-term industrial use. Two-function gun – allows selection between compressed air only or cleaning fluid mixed with air, also enabling component drying. Adjustable leveling feet – precise machine positioning even on uneven surfaces. Construction and technology The MP180 cabinet washer has been designed for maximum functionality in industrial environments. The design of the washing chamber and the integrated fluid heating system allows maintaining a constant cleaning temperature, significantly increasing washing efficiency. The pressure gun with an adjustable operating mode enables both cleaning and drying with compressed air. All components that come into contact with liquids are made of materials resistant to aggressive cleaning agents and chemicals. Precision and work efficiency Thanks to high cleaning pressure and elevated operating temperature, the MP180 pressure washer enables thorough removal of even stubborn contaminants from components with complex geometries. The operator has full control over the cleaning process – from adjusting the intensity of the spray stream to drying the cleaned parts. The 180-liter working chamber allows comfortable cleaning of medium-sized components without the need to disassemble them into smaller parts. Applications The MP180 pressure cabinet washer is suitable for: Automotive workshops, Industrial plants, Machinery service centers, Manufacturing facilities. It is ideal for cleaning: Engine components, Gearboxes and transmission parts, Valves, Pump housings, Hydraulic system components, Other metal parts requiring intensive cleaning. Thanks to its corrosion resistance and high durability, the machine is suitable for long-term operation in chemically demanding environments. Standard equipment Two-function gun (air / cleaning fluid + air) Cleaning fluid heating system Built-in 180-liter tank Stainless steel working chamber Adjustable leveling feet Technical specifications – MP180 pressure cabinet washer Parameter Specification Isdpfx Acjuc Tpyjlsif Washer capacity 180 L Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. Iedpfxjvugwms Acloif After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes

Condition: used, Year of construction: 2002, A counter-pressure filler for glass bottles, featuring a total of 40 short-tube filling valves and a capping machine for crown caps. The bottles undergo a double pre-evacuation prior to the filling process. Additional title: Counter-pressure fillers with short-tube filling valves Capacity: 12000 bo/h referring to 0.5 litre bottles Power: 13 kW Current: 18,75 A Voltage: 230 / 400 V Frequency: 50 Hz Machine partitioning: 125 mm Iijdszg I H Ajpfx Aclef Running direction: left -> right Operation / Control: Simatic S7-300 Position: in auf Füßen stehendem Edelstahlgehäuse Base construction: Carousel-type machine Features: 40 short-tube filling valves, 10 capping heads for crown corks, protective enclosures with doors, control cabinet

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Iedpfx Aezg I Efoclsif Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Machine partitioning: chain division: 110 mm Operation / Control: Simatic S7

Condition: used, Year of construction: 1971, A cleaning tunnel for removing dirt from beverage crates using spray nozzles. The crates are turned upside down before and after entering the crate washer. Additional title: Cleaning tunnel for spraying down beverage crates Iisdpfx Aezg I D Isclof Capacity: 300 crates/h Running direction: left-> right Material: tunnel from stainless steel Position: in a footed housing Base construction: straight-running Features: Spraying jets, Temperature display, box turning mechanisms

Year of construction: 2017, condition: used, Bottle crushing plant (FZA) “Solo Spezial” with manual feeding and integrated noise protection boxfor cullet container. Bottles sorted out by the inspector can be fed continuously into the machine via a conveyor. Additional title: Glass shredder Capacity: 1500 bo/h Entry height from the ground approx.: 1790 mm Iiedpfxjyr Idgj Aclsf Sound power level: 103 dB Emission sound pressure level ≤ 84 dB Power: 3 kW Voltage: 240 / 420 V Frequency: 50 Hz Length: 2690 mm Width: 1715 mm Height: 1730 mm Weight: 1130 kg Formats: bottles up to 0.75 l Material: Stainless steel housing Position: Free-standing on feet Base construction: Enclosed machine with noise protection Features: Motor for shredder drive, control box, integrated noise protection box for shard container, shredding unit

Condition: used, Bottling line for approx. 5000 bottles/h Iodpfxszgcuhe Aclsif Additional title: returnable glass bottle filling, years of construction 1990 - 2016 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Position: free standing Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Iiodozg In Tspfx Aclof

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Iijdpfx Acet Ity Dslof Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: used, Year of construction: 2000, Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data - Manufacturer: Bohrer Maschinenbau - Model / Type: R40 - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Origin: Regenstauf, Germany - Application: Washing / cleaning of beverage crates Iisdpszb A E Dofx Aclef - Construction: Stainless steel housing and machine frame - Conveyor System: Integrated crate transport / conveyor sections - Washing Area: Enclosed washing chamber with splash protection - Fluid Handling: Stainless steel collection basin and drainage system - Access: Stainless steel stairs and maintenance walkway with grating - Control System: Integrated operator panel with push-buttons and indicator lights - Electrical Supply: 400 V Frequency: 50 Hz Connected Load: 26 kVA