Used Bread Baskets for sale (1,318)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Fedpfx Aljzzz Ivo Uspn Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), mileage: 29,976 km, color: red, lifting height: 30,000 mm, Year of construction: 2013, operating hours: 2,485 h, Drivetrain AdBlue system: Yes Drive: Wheel Weights Empty weight: 7.490 kg Functional Lifting capacity: 3.000 kg Dimensions of cargo space: 970 x 255 x 395 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Emission level: Stage V / Tier V Delivery terms: EXW Latest inspection: 2026-01-15 Production country: DE Fpedjzzmmdspfx Al Usn Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Ad blue - Hook blocks = Remarks = Böcker AK 35-3000 * 2013 * 2,485 operating hours * Euro 5 diesel engine * ​​35-meter hook height * 26.5-meter horizontal reach * 3,000 kg lifting capacity * Remote control * Includes man basket * 29,976 km * Inspection valid until January 2027 * Includes documentation and maintenance history

Condition: used, Year of construction: 2011, fuel type: electric, Weights Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm Dimensions of cargo space: 653 x 150 x 198 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 691 m Production country: US Additional information Please contact Christian Theißen for more information Fpjdpfx Aov Tii Ael Ujn Manufacturer: Genie Model: Z40/23N RJ Year of build: 2011 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Swivel range: 355° Max. climbing capacity: 30 % Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available

Year of construction: 2026, condition: used, General information Field of application: Freight transport Technical information Power: 220 kW (299 HP) Type of fuel: Diesel Transmission: Automatic GVW: 13.970 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Production country: DE Fpjdpfezzbu Nex Al Usn Additional information Please contact Christian Theißen for more information Manufacturer: Magirus Model: M32L-AS SC Year of build: 2026 Condition: New Data: Fuel type: Diesel Gear type: Automatic Engine power: 220 kW Max. working height: 32,00 m Max. platform height: 30,10 m Total permissible weight: 15.700 kg Empty weight: 13.970 kg Dimensions LxWxH: 10,15 x 2,5 x 3,29 m Colour: red Supports: Magirus VARIO support system. Level differences of up to 700 mm can be compensated for. Support width: (in front) min. 2,62 m / max. 5,42 m / (rear) min. 2,52 m / max. 5,37 m Number of axles: 2 Seats: 3 (1 Driver and 2 passenger seats) Lighting: Ambient lighting (LED version), equipment room lighting (LED strip), 2x LED spotlights on the basket and main control panel, 2 high-performance LEDs in the basket base and on the side of the basket (shining forward) Ladder set: 4-piece set, with articulated arm Max. basket load: 500 kg / 5 person Equipment: Reversing camera, color display in the driver's cab and at the outrigger control stations, ABA (Analog Load Display) on the ladder set, automatic ladder set retraction, ARF (Automatic Return Function), TMS (Target Memory System), VRS (Vertical Rescue System) Special features: Signaling system with rotating beacon and air compressor horn (Martin type), main control station with display, aluminum safety platform with 6 equipment compartments with roller shutters for various equipment, two anchor points for PPE, 360°/continuously rotatable stretcher bracket with option to attach to the basket floor, CAN bus control, 230V power supply, all-wheel braking system Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, color: grey, Weights Empty weight: 160 kg Functional Lifting capacity: 200 kg Dimensions of cargo space: 145 x 90 x 200 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Mast type: Personnel lift Max swing of arm in degrees: 360 Fjdpfoz Avqhsx Al Ujpn Production country: IT Additional information Please contact Vink Machinery for more information Ferrari Skyler 2 AL 200 2-person basket * NEW * For Hoeflon C6 or C10 * Manually rotatable * 160 kg dead weight * 200 kg lifting capacity

Condition: used, Year of construction: 2012, fuel type: electric, Weights Empty weight: 7.100 kg Fpodpfx Ajywuh Dsl Ujn Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.097 cm Dimensions of cargo space: 574 x 122 x 201 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 612 m Max swing of platform in degrees: 360 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: E300AJP Year of build: 2012 Condition: Used Data: Max. working height: 10,97 m Movable up to working height: 10,97 m Max. platform height: 8,97 m Max. reach: 6,12 m Drive type: Battery Total dimensions LxWxH: 5,74 x 1,22 x 2,01 m Platform dimensions: 1,22 x 0,76 m Max. basket load: 230 kg Swivel range: 360° Overhang: keinen Ground clearance: 0,10 m Empty weight: 7.100 kg Special features: Rotatable work basket, basket arm/vertical swivel angle 141°, white tires, PPE attachment points available.

Condition: used, Year of construction: 2014, fuel type: diesel, Weights Empty weight: 10.714 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.029 cm Dimensions of cargo space: 882 x 244 x 256 cm CE mark: yes Condition General condition: average Technical condition: average Fpjdpfsywuf Asx Al Uon Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1212 m Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 600AJ Year of build: 2014 Condition: Used Data: Max. working height: 20,29 m Movable up to working height: 20,29 m Platform height: 18,29 m Max. reach: 12,12 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,84 x 0,92 m Transport dimensions LxWxH: 8,82 x 2,44 x 2,56 m Swivel range: endless Drive type: Diesel Empty weight: 10.714 kg Special features: Rotating work basket, basket arm, pendulum axis, foam-filled off-road tires, PPE attachment points available.

Condition: used, Year of construction: 2016, fuel type: diesel, Weights Empty weight: 6.650 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.601 cm Dimensions of cargo space: 509 x 230 x 242 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 874 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 360 Additional information Fodpsywidgefx Al Ujpn Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA16RTJ Year of build: 2016 Condition: Used Data: Max. working height: 16,01 m Movable up to working height: 16,01 m Platform height: 14,01 m Max. reach: 8,74 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,80 x 0,78 m Swivel range: 360° / endless Gradeability: 40% (forward) / 45% (backward) Total dimensions LxWxH: 6,73 x 2,30 x 2,27 m Transport dimensions LxWxH: 5,09 x 2,30 x 2,42 m Ground clearance: 0,24 m Overhang: 0,09 m Drive type: Diesel Empty weight: 6.650 kg Special features: Rotating work basket, basket arm, all-wheel drive, white tires, particulate filter, PSA anchoring points present.

Condition: good (used), Year of construction: 2021, mast type: telescopic, fuel type: diesel, Weights Empty weight: 21.730 kg Functional Lifting capacity: 454 kg Working height: 4.311 cm Dimensions of cargo space: 1310 x 398 x 308 cm CE mark: yes Fedpfx Asyx Uu Tjl Uopn Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2830 m Max swing of platform in degrees: 360 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: SX-135XC Year of build: 2021 Condition: Used Data: Max. working height: 43,11 m Movable up to working height: 43,11 m Platform height: 41,11 m Max. reach: 28,30 m Platform lifting capacity: 454 kg Platform dimensions LxW: 2,44 x 0,92 m Total dimensions LxWxH: 20,25 x 3,98 x 3,08 m Transport dimensions LxWxH: 13,10 x 3,98 x 3,08 m Swivel range: 360° Ground clearance: 0,37 m Overhang: 1,71 m Track widening: 3,98 m Tyres: Geländereifen Drive type: Diesel Empty weight: 21.730 kg Special features: Rotatable work basket 160°, basket arm, soot particle filter, high basket load.

Condition: used, Year of construction: 2020, lifting height: 27,800 mm, fuel type: diesel, Weights Empty weight: 3.300 kg Functional Lifting capacity: 295 kg Working height: 2.980 cm Dimensions of cargo space: 810 x 233 x 308 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 300 Year of build: 2020 Condition: Used Data: Max. working height: 29,80 m Max. platform height: 27,80 m Max. reach: 17,12 m Total dimensions LxWxH: 8,10 x 2,33 x 3,08 m Platform dimensions LxW: 1,60 x 0,70 m Max. basket load: 295 kg Swivel range: 2 x 225° Ground pressure: 32/25 kN Ground clearance: 0,23 m Support width vertical: 2,33 m Support width one side: 3,12 m Support width both sides: 3,89 m Support length: 4,44 / 3,16 m Fpedpfx Aewx Nzbsl Uen Own weight: 3.300kg Driving license class: B /3 Special features: World's highest aerial platform on a 3.5-ton chassis, extreme reach, power outlet in the work basket, motor on/off switch in the work basket, grounding possible, setup and retraction automation, memory function, loading area with loading edge 1.00 x 1.93 m. * Manufacturer specifications Information: TÜV and UVV new

Condition: good (used), loading space length: 7,430 mm, loading space width: 1,850 mm, loading space height: 2,100 mm, Year of construction: 2016, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 1.840 kg Functional Lifting capacity: 215 kg Lift height: 1.610 cm Working height: 1.810 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1110 m Max swing of platform in degrees: 360 Production country: FI Additional information Please contact Christian Theißen for more information Manufacturer: Dino Lift Model: 180T-1 Year of build: 2016 Condition: Used Fpodpfxsyx Sgaj Al Uen Data: Max. working height: 18,05 m Platform height: 16,05 m Max. reach: 11,10 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,40 x 0,80 m Swivel range: 360° / endlos Total dimensions LxWxH: 7,43 x 1,85 x 2,10 m Transport dimensions LxWxH: 7,43 x 1,85 x 2,10 m Support width both sides: 4,29 m Support length: 3,88 m Ground pressure: 13 kN Ground clearance: 0,20 m Drive type: Battery 230 V Empty weight: 1.840 kg Special features: Support load 75 kg, swivel work basket, socket in the work basket, maneuvering drive.

Condition: used, Year of construction: 2014, fuel type: electric, Weights Empty weight: 6.970 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.180 cm Dimensions of cargo space: 390 x 121 x 229 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 700 m Additional information Please contact Christian Theißen for more information Units: 5341, 5342, 5343, 5346, 5347, 5348, 5349, 5350, 5351, 5352, 5353, 5354, 5355, 5356, 5357, 5358, 5359, 5360 Manufacturer: Haulotte Model: HA12CJ Year of build: 2014 Condition: Used Data: Max. working height: 11,80 m Platform height: 9,80 m Max. reach: 7,00 m Platform lifting capacity: 250 kg Platform dimensions LxW: 1,15 x 0,81 m Swivel range: 355° Max. climbing capacity: 25% Total dimensions LxWxH: 5,42 x 1,21 x 2,00 m Tyres: White tires Ground clearance: 0,04 m Drive type: Battery Fpedpfsv Tiq Tsx Al Uen Own weight: 6.970 kg Length of transport position: 3,90 m Height transport position: 2,29 m Special features: Rotatable work basket, basket arm +/- 63°/-69°, white tires.

Condition: used, Year of construction: 2014, fuel type: diesel, color: red, Weights Fpodpfx Aev Tiqtel Usn Empty weight: 7.660 kg Functional Mast: articulated arm Lifting capacity: 280 kg Working height: 1.740 cm Dimensions of cargo space: 751 x 226 x 224 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1110 m Production country: FR Additional information Please contact Christian Theißen for more information Units: 5314, 5316, 5317, 5318, 5319, 5320, 5321, 5322, 5323, 5324, 5325, 5326, 5327, 5328 Manufacturer: Haulotte Model: HA18SPX Year of build: 2014 Condition: Used Data: Max. working height: 17,37 m Platform height: 15,37 m Max. reach: 11,12 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,80 x 0,78 m Swivel range: 350° Max. climbing capacity: 40% Total dimensions LxWxH: 7,51 x 2,26 x 2,24 m Movable up to working height: 17,37 m Wheel pressure max.: 13 daN/cm² Ground clearance: 0,30 m Drive type: Diesel Own weight: 7.660 kg Special features: Rotatable work basket 2x90°, basket arm/angle of rotation 140°, all-wheel drive.

Condition: used, Year of construction: 2014, fuel type: hybrid, color: red, Weights Empty weight: 6.512 kg Functional Mast: articulated arm Lifting capacity: 225 kg Working height: 2.080 cm Fedjv Ti T Ujpfx Al Uepn Dimensions of cargo space: 530 x 229 x 215 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1300 m Additional information Please contact Christian Theißen for more information Units: 5423, 5424, 5425, 5426, 5427, 5429, 5433, 5434, 69348, 69350 Manufacturer: Nifty Lift Model: BS2191-HR21 Year of build: 2014 Condition: Used Data: Max. working height: 20,81 m Platform height: 18,81 m Max. reach: 13,02 m Drive type: Hybrid Total dimensions LxWxH: 6,50 x 2,29 x 2,15 m Length of transport position: 5,30 m Height transport position: 2,15 m Platform dimensions LxW: 1,80 x 0,86 m Max. basket load: 225 kg Swivel range: 355° Overhang: 0,46 m Movable up to working height: 20,80 m Max. Pitch angle: 40 % Wheel pressure (Support pressure): 39,28 kN Ground clearance: 0,16 m Own weight: 6.512 kg Special features: Rotatable work basket, basket arm/vertical rotation angle 150°, all-wheel drive, differential lock, pendulum axle, white tires, integrated soot filter.

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 13.320 kg Functional Working height: 2.260 cm Dimensions of cargo space: 737 x 246 x 267 cm CE mark: yes Other information Delivery terms: EXW Max. horizontal reach: 1870 m Max swing of platform in degrees: 360 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HT 23 RTJ Year of build: 2014 Condition: Used Data: Max. working height: 22,56 m Max. platform height: 20,56 m Max. reach: 18,79 m Drive type: Diesel Total dimensions LxWxH: 10,46 x 2,46 x 2,67 m Length of transport position: 7,37 m Height transport position: 2,67 m Track widining: 0 m Platform dimensions LxW: 2,44 x 0,92 m Max. basket load: 450 kg Swivel range: 360° Overhang: 1,10 m Movable up to working height: 22,56 m Max. Pitch angle: 40% Wheel pressure (Support pressure): 70 kN Ground clearance: 0,31 m Own weight: 13.320 kg Special features: Rotating work basket, basket arm/vertical rotation angle 180°, all-wheel drive, pendulum axle, permanently installed soot filter. Fedpjv Tip Nofx Al Ujpn

Condition: good (used), Year of construction: 2015, lifting height: 20,100 mm, fuel type: diesel, Weights Empty weight: 3.460 kg Functional Lifting capacity: 200 kg Working height: 2.210 cm Dimensions of cargo space: 725 x 210 x 301 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220 Year of build: 2015 Condition: Used Data: Max. working height: 22,10 m Max. platform height: 20,10 m Max. reach: 14,00 m Total dimensions LxWxH: 7,25 x 2,10 x 3,01 m Platform dimensions LxW: 1,38 x 0,68 m Max. basket load: 200 kg Swivel range: +/- 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,25 m Support width vertical: 2,10 m (vorne) / 2,10 m (hinten) Support width one side: 2,78 m (vorne) / 2,75 m (hinten) Support width both sides: 3,48 m (vorne) / 3,33 m (hinten) Support length: 3,95 m breit/ 2,98 m schmal Own weight: 3.460 kg Total permissible weight: 3.500 kg Special features: Drehbarer Arbeitskorb, Aufstellneigung maximal 5°, Ladefläche mit Bordwand, Automatische Ablage bis Grundstellung, Aufstellautomatik. Fpjdpfoxc Hm Tex Al Uen Information: Tüv und UVV neu

Condition: excellent (used), Year of construction: 2025, lifting height: 25,060 mm, Weights Empty weight: 3.332 kg Functional Lifting capacity: 230 kg Working height: 2.706 cm Dimensions of cargo space: 749 x 236 x 307 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1584 m Max swing of platform in degrees: 360 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: Ecoline 270 Year of build: 2025 Condition: New Data: Max. working height: 27,06 m Max. platform height: 25,06 m Max. reach: 15,84 m Total dimensions LxWxH: 7,49 x 2,36 x 3,07 m Platform dimensions LxW: 1,38 x 1,09 m Max. basket load: 230 kg Swivel range: 360° Support width: 3,37 m Fpodpfxjywtdde Al Ujn Support width one side: 2,75 m Support dimension: narrow 2,15 m Support length: 4,10 m Empty weight: 3.332 kg Total permissible weight: 3.500 kg Driving license category: B / 3 Special features: on IVECO Daily 35S14H /AdBlue. Information: TÜV and UVV new, new machine without registration.

Condition: good (used), Year of construction: 2016, lifting height: 20,350 mm, fuel type: diesel, Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.235 cm Dimensions of cargo space: 647 x 212 x 300 cm CE mark: yes Condition Technical condition: good Fpodpfxjyxf Ikj Al Uon Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1418 m Max swing of platform in degrees: 225 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2016 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (front) / 16 kN (back) Ground clearance: 0,16 m Support width vertical: 2,12 m (front) / 2,12 m (back) Support width one side: 2,82 m (front) / 2,73 m (back) Support width both sides: 3,52 m (front) / 3,34 m (back) Support length: 4,15 m wide/ 3,19 m narrow Empty weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with side panel 1.05 x 2.13 m. Information: Tüv und UVV new

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 09/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3 Tyres Information Front left - 5 mm Front right - 5 mm Fpsdpfx Aez Drncel Uen Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: good (used), Year of construction: 2012, fuel type: electric, Weights Empty weight: 5.900 kg Functional Mast: articulated arm Lifting capacity: 230 kg CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 700 m Production country: FR Fodpfx Aoz Eqvhsl Uepn Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA12IP Year of build: 2012 Condition: Used Data: Max. working height: 12,03 m Platform height: 10,03 m Max. reach: 7,00 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,21 x 0,80 m Swivel range: +/- 175° Gradeability: 25 % Total dimensions LxWxH: 5,38 x 1,33 x 2,11 m Movable up to working height: 12,03 m Wheel pressure max.: 27 kN Ground clearance: 0,13 m Drive type: Batterie Empty weight: 5.900kg Special features: Rotating work platform, basket arm rotation angle +/- 70°, white tires.

Condition: excellent (used), Year of construction: 2009, 567 USED DEBAG Helios 8060 C electric, deck, shop oven. EXTERNAL DIMENSIONS (in cm): - W: 92 - L: 147 - H: 204 INTERNAL DIMENSIONS OF BAKING CHAMBER (in cm): - W: 60 - L: 80 - H: 16 TECHNICAL DATA: - year of production: 2009 - power supply: 400V 50Hz Fpedez Ezcfopfx Al Usn - power per chamber: 6.8 kW EQUIPMENT: - hood - proofing chamber Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h Fpedsu Idnmopfx Al Usn tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Rolling adjustment via a lever Elongation adjustment via a lever Side controls on the right-hand side Lucoflex scraper blade Fodjz Eh Afjpfx Al Uopn Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Condition: good (used), Year of construction: 2011, lifting height: 2,870 mm, fuel type: electric, Weights Empty weight: 450 kg Functional Lifting capacity: 180 kg Working height: 487 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,77 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Braviisol Model: Leonardo Lui Mini Year of build: 2011 Condition: Used Data: Max. working height: 4,87 m Platform height: 2,87 m Platform dimensions LxW: 1,14 x 0,68 m Max. basket load: 180 kg Max. Basket load on extension: 180 kg Drive type: Battery Platform lenght pushed out: 1,72 m Total dimensions LxW: 1,20 x 0,77 m Height transport position with railing: 1,72 m Height transport position without railing: 0,55 m Fpsdpfx Aljx Sgdae Usn Movable up to working height: 4,87 m Ground clearance: 0,03 m Only indoor using: yes Own weight: 450 kg Special features: White tires extremely maneuverable, turns on the spot. Anchor points for restraint points (PSA) available.

Year of construction: 2026, condition: new, max. tool diameter 400 mm 310 mm operating pressure 2 bar EMSA-ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM "Mini" with tool holders for HSK: ----- ----- Order number 1.501 ROTHATERM industrial washing machine Stainless steel case Basket diameter: 410 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Including the following accessories: Order number 1.521 Surcharge for raising the lid (usable height/max. tool length 310 mm) Order number: 1.522 tool holder for HSK 63F /(for changing with basket) Order number: 3.614 Detergent -EM 40 - 10 x 10 l Fsdpfx Aeyrtzdjl Uopn Packing on pallet ----- ----- price d. Machine in the above design: On request! Options: ----- Tool holder for Powermat / e.g. Change with basket, price: on request! HSK 63 E mount, on request! Filter system (0.08m²), price: on request! The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)