Used Briquette for sale (143)

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Cgodpfx Aljixupmj Rou Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Csdsixupuopfx Al Rsgu Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 Cedpsxgf Scjfx Al Regu — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 90088200, total width: 5,000 mm, total height: 2,000 mm, total length: 6,000 mm, briquette diameter: 120 mm, overall weight: 22,000 kg, input voltage: 400 V, pressing force: 300 t, screw conveyor length: 10,000 mm, year of last overhaul: 2024, Equipment: emergency stop, ArnoBrik Briquetting Machine for Metal Materials Technical Data Main Dimensions Length x Width x Height: 6,000 mm / 19.6 ft x 5,000 mm / 16.4 ft x 2,000 mm / 6.56 ft Weight: 22 tonnes / 21.6 tons Functional Data Csdpeygu Nxsfx Al Rogu Main Cylinder Force: 4,000 kN / 403 tons Cycle Time: 10 sec Throughput per hour: - Aluminium: 1.5 – 1.9 t/h (1.6/1.5 – 1.9/1.86 tons/h) - Steel / Grey Cast Iron: 2.7 – 2.9 t/h - Steel Powder: 1.67 – 2.0 t/h (1.7/1.67 – 2.0/1.96 tons/h) - Tyre Wire: 2.3 – 2.8 t/h (2.62 – 2.75 tons/h) Briquette Diameter: 120 – 130 mm (4.7 – 5.1 inch) Briquette Height: 110 – 120 mm (4.3 – 4.7 inch) Briquette Weight (depending on material): 3.0 – 12.0 kg (6.61 – 26.45 lbs) Hydraulic Equipment Number of Pumps: 3 Power Requirement per Pump: 37 kW / 49 HP Working Pressure: 300 bar / 4,351 psi Hydraulic Oil Tank: 2,200 l / 581 US gallons Electrical Equipment Total Power Requirement: 127 kW / 170 HP Drive Power: 3 x 37 kW / 49 HP Control Voltage: 24 V DC Operating Voltage: 400 V, 50 Hz

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Cjdpfxexzqmzj Al Regu Height: 1500 mm

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) Codpfjwrp Emsx Al Rjgu - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: new, Year of construction: 2025, Quick option to shrink film packaged briquettes. Operator manually loads briquettes into machine and it packs them into selected thickness film. Does not need an automated transporter system, compact. Two sided seam system is more dust resistant (when compared to airless units which have a very long seam). Has a plate that covers sealing surface from dust during operation. Selectable package width. Can be used for other products (bottles, sugar packets and etc.). Can be purchased with motorised conveyor Cgedstpnwlepfx Al Rju which returns packages back to operator for better ergonomics. Recommended to be used with 1-3 presses depending on operator capabilities. Specifications: Min cycle time: 8 seconds Installed power: 22kW Length: 3500mm Width: 1500mm Height: 2100mm Weight: 700kg Warranty: 2 years / 1000 workhours

Condition: new, Year of construction: 2025, Briquetting is a great cost-saving measure for companies. Further improvement of the efficiency and quality of packing pays off. BMD-800B is fit for a wide range of shrink wrapping with single or multi-row products. Automated alignment and placement feature improves the production efficiency and allows for the product to operate 24/7. When paired with UMPT briquette presses & our transportation table, this machine can support up to 4 BPA600A presses and produce up to 5 bags of briquettes per minute. After packaged in high-quality polyethene film the products have a compact and neat appearance which ensures the items’ integrity, the convenience of transportation and resistance to humidity. In contrast, currently widely used pre-made briquette bags have the disadvantage of unnecessary movement of briquettes inside the package which in turn disintegrate during logistics and lose value in the eyes of the end-consumer. Using shrink wrapping tightens the pack making it easier and safer to handle, increases resistance to humidity and even allows briquettes to be stored out in the elements. Stick-on carry handles are optional to provide the ultimate briquette pack. Features: Automated quality control and recycling of rejected briquettes Automated de-dusting Automated alignment and packing Automated leaflet insertion Automated sealing and heat shrinking of packages Automated palletizing and pallet wrapping The system ensures proper briquette dedusting, weighting (optional), alignment, packing and shrinking of the package. Automated sealers ensure a proper seal on each package eliminating the human factor while automated palletizing attachments load and wrap the pallets. Technical data Sealing type Sleeve Cgsdpofh R Uzsfx Al Reu Packing capacity ᐸ5 packs/min Shrinking Tunnel speed Variable, ≤15 m/min Working height 780-850mm Shrinking Tunnel size Depends on the size of the product Sealing knife width 880mm Air pressure ≤0.5MPa (5 bar) Power supply 380V/50-60Hz/Trifazis Rated power consumption ≤30 kW Film type Polyethene (PE) Max film size 850mm (width) x 280mm (outer diameter)

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Cgodpotmugcjfx Al Rou Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm . Weight netto 3000 kg. Eletric power of the press: 380 V 50 Hz 33 kW 70-100 A Capacity of the press: 450-500 kg/h Cgsdpfx Alsc Nb Rfo Rou Pressure: minimum 1000 kg/cm², maximum 1700 kg/cm2 Dimensions of the briquette: length 150 mm width 60 mm height 40 – 105 mm

Condition: new, Year of construction: 2025, Wood chips are a common by-product generated by woodworking companies during the manufacturing process. Due to low options for realization wood chips are usually discarded by selling it to heating plants for a low price. Our MM-2000 hammer mill allows companies to turn wood chips into briquettable sawdust by shredding and crushing it through metal screens also known as sieves. Quick-release hatches allow quick and easy access for maintenance while keeping workers safe. Blades of the machine are not fixed and spin freely due to the centrifugal principle. This means that blades take less damage on impact and have an extended lifetime. Fixed blades can be ordered if required for specific produce. The mill can be ordered to fit various produce and applications ranging from reducing biomass waste to spice production, chemical and mineral. The perforated sieves and blades are easily interchangeable to adjust for different types of materials and purposes. Cedpefh R I Aofx Al Rogu Free test-mill of material is available on demand. Capacity depends on material Dimensions 1765x960x1060mm. Weight 996 kg. Power 30/37/45kW, 50Hz, 380V.

Condition: new, Year of construction: 2025, Units available in stock! Power 18.5kW Power supply 380V 50Hz Shredding area size 600x595mm Revolutions 98RPM Length 2085mm Width 1248mm Height 1495mm Weight 1550kg VVS-600 is the smallest member of our VVS family of shredders. Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable particles which is easier to store, transport and sell. Our VVS-600 provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: - Assists the rotor by pushing the material to provide maximum working area efficiency. - Is controlled by an algorithm to ensure safety and efficiency - Gimbal-mounted hydraulics provide a high lifetime - Enclosed hydraulics to reduce noise, vibrations and increase safety Drivetrain: - The drivetrain is protected against hits from foreign objects by using a twin-disengagement system which is easily resettable and serviceable. - Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor: - The centrepiece of the rotor is milled from a single block of high-grade steel. - In case of severe damage to the rotor or its shafts due to a foreign object, the latter can be replaced without the need to replace the whole unit – costs saved for the user! - Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. - 4-sided rotatable blades – a single blade will last you 4 times as long. - Counter blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output: Csdpfxjfpa Awj Al Regu - Output volume and particle size is controlled by an interchangeable sieve screen which is adapted based on the material used. - The shredded material can be transported out of the machine by using different types of transporters, including air, belt and screw conveyors. Affordable pricing, proven reliability, easy maintenance, warranty, quick service and parts delivery – these are just a couple of reasons to choose our VVS series of shredders.

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Codetmup Uopfx Al Rogu Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Cgsdpexy E H Hsfx Al Rou Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Cedpfx Asxy E Evjl Regu Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. Cgjdpfxeubb Ube Al Reu The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Cgsdpswun I Eefx Al Rou Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Including full documentation and CE.

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Cgodjfk N Tpepfx Al Rju