Used Brochures for sale (238)

Condition: used, punches and dies Complete range of well-preserved punches and matrices, the number corresponds to the information on the brochure, the dimensions may vary. Bwodpfof Srn Usx Abnsn

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 887 h, load capacity: 225 kg, lifting height: 9,140 mm, platform length: 1,200 mm, platform width: 700 mm, overall weight: 5,025 kg, empty load weight: 4,800 kg, transport length: 4,200 mm, transport width: 1,220 mm, transport height: 2,120 mm, fuel type: electric, ground clearance: 100 mm, Good day, We hereby offer you, without obligation, a used articulated telescopic boom lift (telescopic work platform) on wheels manufactured by TEREX AERIALS, type TA30N Boom Lift. The following technical data has been taken from the manufacturer’s operating manual and brochures; we cannot guarantee its accuracy or completeness. Manufacturer: TEREX AERIALS Model: TA30N Boom Lift Year of manufacture: 1999 Operating hours: 887 hours Transport dimensions (retracted): 4.20 x 1.22 x 2.12 m (L x W x H) Unladen weight: 4,800 kg Maximum platform height: 9.14 m Maximum working height: 11.14 m Maximum outreach: 5.20 m Turning radius (outside): 3.50 m Maximum gradeability: 20% Maximum driving speed (boom retracted): 4 km/h Maximum driving speed (boom extended): 0.75 km/h Safe working load (2 persons): 225 kg Maximum noise level: 70 dB at 3 m Operating temperature range: -5°C to 40°C Note: Bwodpfx Aoymnz Iebnon This machine was used sporadically in a distribution warehouse for electrical installations, assembly, disassembly, and maintenance work, exclusively indoors in a warehouse environment. The articulated telescopic boom lift is in good condition and can be inspected and tested under power. We would be pleased if this machine is of interest to you. Your Service Team at Mertens & Frowein GmbH

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Bsdpfxerdzg He Abnown The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 Bsdpfx Abeh H Duhenown THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Bedou Iukfspfx Abnewn Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Bwodexwdndspfx Abnen Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Cylinder size 400 x 120 mm Motor power 1.5 kW Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Bwedpfjw Id S Ssx Abnon For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: refurbished (used), Year of construction: 2002, Horizon VAC 100 A+C brochure line Staple-fold station SPF 20A, trimmer FC 20A Jogger PJ 77R Bwjdpfxjyl Aiws Abnsn

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price Bwsdpfx Ajwt Abwjbnsn To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: Bedpfx Asxv Abtjbnewn A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: used, planing width: 630 mm, total width: 1,100 mm, total height: 1,300 mm, overall weight: 1,200 kg, total length: 1,200 mm, planing height: 200 mm, space requirement height: 1,300 mm, space requirement length: 1,200 mm, space requirement width: 1,100 mm, No. 3249 Thickness planer Hombak D 63 Used Planing width 630 mm Planing height max. 200 mm 2-knife shaft Kickback protection Toothed infeed roller Smooth outfeed roller Bwedpfx Abox Ilzvjnon 2 feed speeds 9 / 18 m/min 2 height-adjustable rollers in the thicknessing table Knife setting gauge from Panhans Transport dimensions approx. 1200 x 1100 x 1300 mm LWH Weight approx. 1200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Bwedpjv N E Iyofx Abnsn Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Bodpfxex H Al Ao Abnown Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: used, power: 1.1 kW (1.50 HP), input voltage: 380 V, volume flow: 2,000 m³/h, intake manifold diameter: 140 mm, filter area: 1.65 m², total height: 1,900 mm, total length: 1,100 mm, total width: 650 mm, overall weight: 50 kg, extraction connection diameter: 140 mm, nominal flow rate: 2,000 m³/h, negative pressure: 1,800 Pa, nominal power: 1.1 kW (1.50 HP), space requirement height: 1,900 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, transport length: 1,100 mm, transport width: 650 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bwodjx Hi Rxopfx Abnsn Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3247 Front forklift Nissan PD011A15PQ / 1.5 tons Used, year of construction 2007 Fuel type LPG Load capacity 1500 kg Triplex mast Lifting height 4500 mm Free lift 150 mm Nissan engine 35 kW Automatic transmission Sideshift Fork length approx. 1100 mm Height above roof approx. 2200 mm Overall length incl. fork 3360 mm Overall width approx. 1010 mm Bwsdpsxq Hc Djfx Abnsn Forklift is fully functional / engine is dry / no oil drops Transport dimensions approx. 3700 x 1150 x 2200 mm LBH Weight approx. 3000 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Bwodpfxexnqaue Abnen Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Bwsdpfx Absxn Tiljnsn Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Bwjdpfx Abexnprconen Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Bwjdsxl Ha Sspfx Abnen Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Bwedsxwp S Iopfx Abnen Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04499 Screw compressor Schneider AM K 15-10 Bjdpfjxqhfmex Abnewn Used Motor power 15 kW Actual air flow rate 120 m3/h Pressure max. 10 bar Volume flow 2000 l/min Sound pressure level 65 dB(A) Electronic control unit AIRBASIC 2 Technical documentation available Transport dimensions approx. 1200 x 800 x 1500 mm LWH Weight approx. 500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2011, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, fork length: 1,150 mm, overall weight: 150 kg, total height: 1,350 mm, total length: 1,750 mm, total width: 550 mm, No. 04498 Electric high lift pallet truck Lifter HX10E 540 Used, year of construction 2011 Bwedpfxexyx Tmj Abnon Electric lift, manual drive Load capacity 1000 kg Fork length 1150 mm Maximum lift height 800 mm Battery 12 V Including charger EASYLOG 1210 Good condition, battery lasts approx. 1 week Made in Italy, CE-compliant Transport dimensions approx. 1750 x 550 x 1350 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Bjdpfxjv Hdg Ns Abnown Terms of delivery: ex location

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Bwsdpsymmmpofx Abnen Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Bodpfsymldtjx Abnown Baler Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. We would be pleased if this complete baler line is of interest to you. Your service team at Mertens & Frowein GmbH