Used Button Manufacturer for sale (38,651)

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Iodpfjxbgrgjx Acleif Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Iedpfx Aexpugnocleif Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: good (used), Surface Grinding Machine Stock number: 3085 Brand: Geibel & Hotz Iedpoyryf Njfx Acloif Year of manufacture: 2015 Machine number: 4051 1015 Model: FS 640 Z CB Grinding length: 600 mm Grinding width: 400 mm Distance table to spindle centre: 140 to 725 mm Table load capacity: 600 kg Magnet: 600 x 400 mm Table longitudinal travel: 200 to 650 mm Table drive: via toothed belt Table speed: 5 to 35 m/min Vertical drive: electromechanical with ball screw Vertical feed speed: 50 to 4,000 mm/min Smallest feed increment: 0.001 mm Measuring system: motor measuring system Max. cross travel: 400 mm Drive: ball screw with backlash-free toothed belt Cross feed speed: 50 to 2,000 mm/min Cross adjustment: electric handwheel and direction pressure buttons Vertical feed speed: 50 to 2,000 mm/min Measuring system: motor measuring system Grinding spindle: 7 kW Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding wheel speeds: 600 to 3,180 rpm Equipment: separate control cabinet, partial enclosure Note: Machine is supplied without magnetic separator and coolant system, was previously connected to a central system at the company. Condition: Machine can be inspected under power, video available via WhatsApp Connection: 15 kW Machine weight: 2.4 t Machine dimensions: 3,300 x 2,000 x 2,200 (+800) mm

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit Iijdpfx Aoq H Aqxeclef - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system Iodpfoy Umhkjx Aclsif • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders Iodpfxoxcuazs Acleif >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: Iisdpfovmpx Rjx Acljf - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 2,240 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, We are offering this Striebig CONTROL 18 5224 vertical panel saw in very good condition, manufactured in 2021. Please find the valuation report attached. Type: 5224 Cutting length: 4,300 mm Vertical cutting height: 2,240 mm Horizontal cutting height: 2,100 mm Maximum material thickness: 80 mm Rated voltage: 400 V Frequency: 50 Hz Feed speed: 10–25 m/min Standard machine equipment One-piece steel frame Bearing-mounted rollers with automatic brake Dust extraction system integrated into the frame Automatic recognition of the center support strip User-friendly controls for enhanced operating comfort Horizontal laser cut-line projection 12" touchscreen control panel Optimal support surface across the entire cutting area Automatically pivoting steel-wood support section (table) Small-format cutting support integrated into the frame Carbide-tipped saw blade, diameter 300/30 mm Sound-insulated saw housing 5.5 kW drive motor (S6 duty) Electromagnetic motor brake Automatic beam locking Precise unit positioning via push-button control Automatic locking of the cutting unit Automatic saw plunge function Automatic rotation of the cutting unit Operating hours counter DMS digital measuring system in both horizontal and vertical directions (X and Y axes) Expert Cut package Electronic dimension setting on the X axis Automatic positioning of the beam and cutting unit 12" control screen Striebig cutting optimization software Label printer Option for connection to the company network The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone. Iiedpjy N Sf Rjfx Acljf

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Isdezuz Hlopfx Acleif Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 1,800 mm, total length: 2,550 mm, total width: 1,600 mm, overall weight: 4,300 kg, Sale from Bremen location. Inspection possible by appointment. Model: MAZAK QUICK TURN 15-U Year of manufacture: 1988 Control: Mazatrol CAM T2 Working area: max. swing diameter: 440 mm max. turning diameter: 270 mm max. turning length: 500 mm bar work up to diameter max. 51 mm Main spindle: speed range: 36 – 3,600 rpm main drive power: 15 kW Iiodpfx Aszvf H Seclsf constant torque: 230 Nm spindle nose: A2 – 6 inches spindle bore: 61 mm Tool turret: standard version: 8-station turret indexing time: - 1st station: approx. 0.5 s Travel distances: turret – travel distance: x-axis: 155 mm z-axis: 510 mm Travel speed: rapid traverse: x-axis: 12 m/min z-axis: 24 m/min Tailstock: tailstock travel: 460 mm tailstock quill: MK 4 quill stroke: 130 mm Machine data: total connected load: 31.3 kVA machine weight: 4,300 kg machine dimensions: L x W x H: approx. 2.55 x 1.60 x 1.80 m

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: AC, total height: 1,620 mm, total length: 830 mm, total width: 900 mm, overall weight: 110 kg, saw blade diameter: 275 mm, cutting range round steel at 90°: 80 mm, saw drive: 1,500 W, Exhibition machine, like new Year of manufacture: 2022 - Suitable for steel - Two cutting speeds - Reduction gear, low-noise operation in oil bath - Automatic membrane coolant pump with standard coolant filter - Movable safety guard ensures optimum safety during cutting - Control handle with safety switch - Electrical system in low voltage (24 volts), equipped with emergency stop button, main switch, speed selection switch, and overload protection - Machine head rotatable 45° to both sides - Quick-release vice tiltable 45° to both sides - Quick-release vice with double clamping device ensures precise, burr-free cuts - Quality Made in Europe Iodpjxrz Ikefx Acljif

Condition: used, power: 141 kW (191.71 HP), Year of construction: 2020, operating hours: 2,745 h, Equipment: ABS, air conditioning, all wheel drive, front linkage, * General Data * Model: JCB FastTrac 4190 * Year of Manufacture: 2020 * Vehicle Type: Compact Tractor/Carrier Vehicle (FastTrac Series) * Application: Construction, Agriculture, Off-Road Operations, Material Transport * Dimensions and Weight * Wheelbase: approx. 2981 mm * Overall Length: approx. 5270 mm * Width: approx. X mm (with/without attachments) * Attachment/Stability Features: Integrated profile/side guidance, optional ballast weight * Operating Weight (unladen/approved): approx. 12990 kg * Engine and Performance Data * 60 km/h approval * Engine Version: Diesel engine (Common-Rail/Turbocharger depending on equipment) * Displacement: approx. 6596 cm³ * Power: approx. 141kW * Fuel System: Turbocharger, exhaust aftertreatment (e.g. DPF depending on model) * Cooling: water-cooled engine, oil cooler * Drive and Chassis * Drive: All-wheel drive (4x4) or all-wheel drive/rear-wheel drive, optional automatic brake control * Transmission: hydrostatic or synchronized manual transmission (depending on version) * Oscillating Axle/Steering: Steering angle for tight spaces * Ground Clearance: approx. 300 mm * Payload/Lifting Forces: Lifting capacity according to model designation * Hydraulics and Accessories Iijdpfx Aszl Itgsclsf * Hydraulic Pressure: approx. 180 bar * Hydraulic Flow: Main circuit/secondary circuit depending on version * Pressure and Flow Control: Proportional control, joystick operation * Connections: Quick couplings, front/rear hydraulics * Front Loader Compatibility: yes * Attachments/Equipment Features * Front Loader: * Rear Hydraulics: available * Quick Change Systems: available, type (e.g. oil hose quick change system) * Front Attachment (e.g. front hydraulics) * Cabin and Ergonomics * Cabin Type: enclosed operator cabin * Field of View: 360° all-round visibility, large front window * Driver Comfort: Steering wheel adjustment, seat comfort, air conditioning/heating * Operation: Joysticks/multifunction lever, button layout * Noise Level: typical value in the interior (dB/A) * Electrical System and Systems * On-board Voltage: 12V * Display/Control Panel: Multifunction display, telemetry option * Safety: Hill start assist, optional reversing camera, retractable warning signs * Diagnostic System: OBD/manufacturer diagnostic tool available * Safety and Protection * Rollover Protection (ROPS)/Sun Visor: available * Seat Belts: 3-point seat belt * Hydraulic Protection/Covers: Fenders, covers * Lighting: Work lights front/rear, turn signals * Maintenance and Condition * Maintenance Condition: regular maintenance according to manufacturer's schedule * Oil/Filter Change Intervals: according to manual * Special Features (reflection of equipment) * Modern Comfort Package: Air conditioning, radio, USB port * Telemetry Option: Fleet management available * Safety Extras: Reversing sensor/camera, immobilizer * Fassi loading crane F135A.2.23 * Linear remote control * Hydraulic winch V20 * 3-point support * Swivel supports * Operation with two-shell grapple possible * Additional hydraulics at crane tip with quick coupler * 420° swivel range The JCB machine is available immediately, subject to prior sale.

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. Iijdpfx Aceyzn Dmeljf • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1329, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: TNC426/430, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, number of spindles: 1, number of slots in tool magazine: 29, Equipment: chip conveyor, documentation/manual, CNC Machining Center HEDELIUS BC 80 HEDELIUS BC 80 CNC machining center with HEIDENHAIN TNC 430 control. The machine is equipped with a powerful Siemens drive system and offers large travel ranges for machining medium to large-sized workpieces. The control supports multi-axis machining and features tool management, probe functions, and tool measurement. Technical data Manufacturer: HEDELIUS Model: BC 80 Control: HEIDENHAIN TNC 430 Axes: X / Y / Z as well as rotary axes A and B (5-axis configuration) Travel range X: approx. 1,700 mm Travel range Y: approx. 800 mm Travel range Z: approx. 750 mm Rapid traverse: up to 30 m/min in the linear axes Max. spindle speed: 5,000 rpm Min. spindle speed: approx. 25 rpm Ijdpszvf Agjfx Acloif Spindle motor: Siemens 1PH7137-2NG0 Tool magazine: approx. 29 tool positions Probe available (infrared probing system) Tool measurement available Electronic handwheel HR410 available Equipment HEIDENHAIN TNC 430 CNC control Tool magazine Tool measurement Workpiece probe 3D ROTATION / Swivel machining Siemens servo and spindle drives Electronic handwheel Coolant system Condition Used Functionality: can be inspected by arrangement Sale in the current condition Delivery conditions Price: €39,500 net, negotiable Incoterm: FCA Dismantling and transport by the buyer Overhead crane can be made available for dismantling and loading after consultation.

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Iisdpfx Aozuzpmocljf Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. Iisdpfx Aezu Auwsclsf This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: Iijdpfsznv A Ujx Aclsf - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm Iedpfxezvf Naj Aclsif - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 18 / 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 Iijdpfozvf Susx Aclsf - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Isdpfxozil R Rs Acljif Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Iiedjzkqdxepfx Aclef You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R Iisdpjvmywqefx Aclof 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Machinetype: thread rolling machine - flat die Make: MENN Type: GW52 Constr. year: 1974 diameter range: 2,5-6 mm Ijdpfxowi Ti Ro Acleif shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 1300229, input voltage: 400 V, type of input current: three-phase, power: 1.8 kW (2.45 HP), Used Iozzelli continuous vacuum filler, model X130, year of manufacture 2002, work condition but need repair and careful checking, power supply 1.80 kW, 50 Hz, 400V, serial number 1300229. Continuous vacuum stuffers for small and medium producers. This continuous vacuum filler is equipped with a 130-litre hopper for manual loading. Unfortunately, the speed button does not work and at this moment the filler rotates at low speed, the speed cannot be selected as the button is "overturned. It lacks the digital panel that shows the number of revolutions per minute. It also has a hydraulic oil leak somewhere from the pump, so clearly the machine needs a repair. Sales price: 4.150 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Iedpfer Dd H Ijx Acloif Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Isdpfx Aoy H N Tmscleif Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee