Used Button Manufacturer for sale (34,103)

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane Redpfx Agoyall Rjljn

Condition: good (used), Year of construction: 1991, Centre height: 285 mm Centre distance: 1250 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 365 mm Spindle bore: 62 mm Bed width: 360 mm Speed range, 24 steps: 11.2 – 2240 rpm Rjdpfx Agjx Upp Relsn Feed rates 60 longitudinal feeds: 0.06 – 56 mm/rev 60 transverse feeds: 0.03 – 28 mm/rev Thread cutting 60 thread pitches, metric: 0.5 – 448 mm 60 thread numbers, imperial: 56 – 0.0625 TPI Quill stroke: 190 mm Quill diameter: 80 mm Tailstock taper: MT 5 Drive power: 15 kW Dimensions (L x W x H): 3500 x 1440 x 1380 mm Weight: approx. 2,600 kg Accessories / Special Features: • 3-jaw wedge bar chuck SCHUNK 315 with jaw safety lock • Feed and rapid traverse via cross switch and push button • Quick-change toolpost system "Multifix" size C • Coolant system • Safety guard for chuck (electrically interlocked) • Work area lighting Option: - 3-axis digital readout, manufacturer K+C - Additional accessories (e.g. faceplate, live centre, tools, etc.) on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Rodpfxox U Tize Aglsn Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A Rsdpfxew Ixw As Aglsn • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) Rodpfjw Nafkox Aglon - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Rodpfx Aetvb Iujglsn Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: excellent (used), functionality: fully functional, overall weight: 6,400 kg, Overhead Crane – 2 x 3,200 kg – KONE – Industrial Grade For sale: a robust overhead crane from an industrial work environment, designed for heavy-duty, daily operation in workshops, production halls, steel fabrication, recycling, or maintenance settings. This crane installation features a double-girder overhead crane design, providing high lifting capacity paired with precise controls. Key Features • Crane runway/system manufacturer: KONE • Type: Overhead crane (double girder) • Lifting capacity: 2 x 3,200 kg • Total possible capacity: 6,400 kg (depending on hoist mechanisms deployed) • Fitted with electric trolley/hoist Rodjyffh Aepfx Aglsn • Operation: pendant push button control • Application: suitable for heavy industrial use • Construction: steel crane runway with overhead configuration The crane has been in use within a technical environment and is engineered for continuous industrial operation. It is ideal for moving heavy machinery, steel structures, concrete elements, installations, or material flows within a hall. — Advantages ✔ Extremely strong and stable double-girder construction ✔ Suitable for professional applications ✔ Reliable industrial quality ✔ Immediately deployable in workshop or production environments — To Be Added (coming soon) The following details will be added shortly: • Span (crane runway width) • Runway length • Lifting height • Year of manufacture • Technical documentation / certification • Options for dismantling and transport — Inspection available by appointment. Dismantling and transport to be arranged by mutual agreement. Interested or have questions already? Feel free to contact us.

Condition: used, mileage: 43,995 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,137 kg, maximum load weight: 663 kg, overall weight: 2,800 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,140 mm, loading space length: 2,336 mm, loading space width: 1,650 mm, loading space height: 1,353 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, sliding door, soot filter, traction control, Interior trim, wooden load floor, dual passenger seat, disc brakes, partition wall, lumbar support, clock & tachometer, brake pad wear indicator, heat-insulating glass, 5 doors, manufacturer’s warranty, 1st owner, Euro 6e emission standard, green environmental badge (4), steel wheels, reversing camera, anthracite, passenger airbag, right-hand sliding door, navigation with display, color monitor for navigation system, parking sensors, parking camera, power windows (2), seat heating, radio, radio/MP3, external temperature display, heated exterior mirrors, power steering, electrically adjustable exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, German market version, other equipment available, subject to errors and prior sale. Trade-in possible, financing available – please contact us for a tailored offer. 502 Digital Extra: Intelligent Speed Assist Updates B25 Electric parking brake BA3 Active Brake Assist BB7 CO2-optimized brake system BH1 HOLD function C6L Multifunction steering wheel CF0 Standard chassis CL1 Steering wheel adjustable for height and angle D51 Continuous partition wall with 1 window E07 Hill start assist E1D Digital radio (DAB) E1E Digital Extra: Hard Drive Navigation E5 Wiring for trailer socket E7M MBUX multimedia system EL8 2-way front speakers EW6 Digital Extra: Remote Services Plus EY2 Digital Extra: Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F2W Winter package F3Z Comfort central locking F48 Heated windshield washer system F64 Electrically folding exterior mirrors F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors F71 Auto-dimming interior mirror FP2 Mirror package Vito FR1 Non-retractable rear camera FR8 Reversing camera FY7 Multi-button remote control FZ5 Anti-theft alarm system G439 G-TRONIC H15 Heated passenger seat H16 Heated driver's seat H20 All-round heat-insulating glass HH9 TEMPMATIC semi-automatic climate control Rodpfx Ajyf Iu Seglon J5 Seat belt warning system for passenger seat

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment Rjdpfx Aox D Epcsglen • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Year of construction: 2008, condition: used, Number of sanding units 8 st. sanding width 150 mm Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 ----- ----- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area. By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles. - Timed replacement of the rotating in synchronism Aggregate - motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button - Display of workpiece thickness via digital display with modern magnetic tape system - Variable grinding disc speed via frequency converter to adapt the grinding intensity to different Primers by means of frequency converters 200-1000 rpm - Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width - Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the Abrasive blade aggregates on the selected profile - modern PLC control for easy operation of the machine - Suction connection 5 x 100mm diameter - Length (body) x width x height (mm): 2600 x 1500 x 1600 Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition) - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Technical specifications: Number of sanding units: 8 pcs. Surface brush width: max. 150 mm Working height: max. 100 mm Surface Brush Motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed rate: 4-20 M / min Feed stepless Speed ??controller grinding units Automatic width detection Digital magnetic tape gauge Extraction nozzle: 5 x 100 mm Air requirement: 5 x 565 m3 / h Minimum air velocity at the connection of the machine: 20 m / s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg Rsdpfsxpi D Ujx Aglen WITH inlet roller conveyor ----- Price of the Löwer amchine on request! he return conveyor device that can be seen in the pictures is no longer available and is NOT included in the scope of delivery (Technical data according to manufacturer - without guarantee!)

Condition: as good as new (ex-display), Year of construction: 2021, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Rsdpfxjycqf Uo Aglsn Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Year of construction: 2015, condition: ready for operation (used), This Zoller smile 400 optical measurement machine was manufactured in 2015. It features a 24V power distribution system, a lighting module Z100-L, and a high-precision spindle SK 50 with a runout accuracy of 0.002 mm. It also includes a 17" panel PC, USB camera with integrated LED lighting, and a servo motor with encoder. Consider the opportunity to buy this Zoller smile 400 optical measurement machine. Contact us for more information. • 24V power distribution with fuses • USB motion controller • ZOLLER measuring instrument control • 11th generation 17" panel PC • Printer for TH labels • Printing width from 25 mm to 108 mm • Membrane keypad for "smile2" with 3 buttons • High-precision spindle SK 50 • Runout accuracy 0.002 mm • Accessory kit for clamping unit "smile" • USB camera with optics and integrated LED incident light • Transmitted light "pilot" DLR / V-series • Servo motor with encoder and pinion • Software version: Pilot 1.14.18.0 Redox Tkblepfx Aglsn

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3 years manufacturer's warranty Technical Data Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/HP Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Evaluates signals from the machine's integrated sensors and displays them graphically using symbols - Similar to the previous engine protection by Weber MT, the engine shuts off whenever continued operation could cause engine damage - The user is also shown, via symbols, how to remedy the displayed fault - If the air filter is too dirty, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also includes COMPATROL compaction control, now in a new design - It displays the compaction progress to the user via a clear and easy-to-read bar graph - Machine operation has also changed: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically regulates the correct speed Rsdpfeyfvaiox Aglen The reversible soil compactors of the CR series stand out for their powerful compaction performance and highest efficiency. They are therefore the first choice for compaction works in road and civil engineering as well as paving. Balanced running characteristics, high operating smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 9 Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic switching - Throttle and hydraulic switching integrated and protected in the guide handle - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading via large foldable crane eye - Secure transport with additional lashing eyes on the engine console - Improved operator convenience with electric start - Application areas: road and civil engineering, paving, and, due to the low overall height and working width, the CR 9 is also ideal for use in trench shoring We have a very large selection of various vibratory plates in stock and immediately available! Mr. Herden (Tel. ...) will be happy to assist you. We are also happy to provide you with a financing quote on request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, Year of construction: 2024, operating hours: 375 h, YEAR OF MANUFACTURE: 2024 OPERATING HOURS: only 375h Skid-steer quick-change system on the rear axle!!! Additional 150 l/min double-acting HighFlow hydraulic circuit for operating milling cutters, mulchers, etc. on the skid-steer mount +Double-acting LowFlow circuit in the undercarriage Operating weight: approx. 11,800 kg Engine power: 109 HP / 81 kW - Immediately available & directly from the JCB dealer! EQUIPMENT Rjdeyfr H Sjpfx Agljn • Comfort cab (ROPS/FOPS) with automatic climate control, air-suspended & heated premium seat, start-stop button • Color display with programmable function for hydraulic attachments (liter flow, up to 20 attachments), rain-protection roof • Engine auto-stop and automatic speed reduction • Hydrostatic, stepless drive >> with automatic torque adjustment 40 km/h • LED work lights >> 2x boom, 6x cab roof front and rear • JCB EcoMAX 4-cylinder diesel engine with SCR, DPF & DEF/AdBlue • Dozer blade on front axle • Skid-steer mount on rear axle • 3 steering modes: crab, front axle and all-wheel steering >> Including steering direction changeover • 2.00 m dipper stick incl. bucket cylinder guard • 1x hammer/shear hydraulics (up to 120 l/min) • 2x tilt bucket hydraulics (up to 60 l/min) • 1x free return • 1x leakage oil line • 1x control circuit for hydraulic quick coupler • Electric refueling pump • Tires: DELCORA 315/70 R22.5 incl. mudguards • Hose rupture safety valves • Bucket cylinder protection >> for boom, adjustable boom, dipper stick & 2x bucket cylinder • Special approval, CE certification & TÜV for 40 km/h Optional: Rototilt R3 MS08 quick coupler 08 Price: €15,000 net Always in stock! • Forestry or grass mulcher by SEPPI M. on request • Cutting head Woodcracker CL260 on request • Sorting grab DMS SG9050 on request • Branch/hedge shears or branch saws - We are an official JCB dealer (main dealer) We kindly ask you to arrange an appointment before your visit. Mr. Mihm is available at [contact details]. Do you need transport? We cooperate with various forwarding agencies. Unless otherwise stated: Sale of used vehicles is made without any guarantee or warranty. We are an authorized Mercedes Benz service partner, JCB dealer, IVECO dealer and MAGNI dealer. Always over 700 trucks / commercial vehicles, used & new construction machinery, aerial work platforms, forklifts, telehandlers and more in stock! This offer is non-binding. Subject to errors and prior sale. Rental possible = Further information = Drive: wheels Contact Tobias Ebert for more information.

Condition: used, Year of construction: 2022, operating hours: 239 h, YEAR OF MANUFACTURE: 2022 OPERATING HOURS: only 239h Operating weight: approx. 11,800 kg Engine output: 109 HP/81 kW - Immediately available & directly from the JCB dealer! EQUIPMENT • Comfort cabin (ROPS/FOPS) with automatic climate control, air-suspended & heated premium seat, start-stop button • Color display with programmable hydraulic attachment settings (flow rate, up to 20 attachments), rain protection roof • Engine auto-stop function & automatic engine speed reduction • Hydrostatic, stepless drive >> with automatic torque adjustment Top speed: 40 km/h • LED work lights >> 2x on boom, 6x on cab roof front and rear • JCB EcoMAX 4-cylinder diesel engine with SCR, DPF & DEF/AdBlue • Dozer blade on rear axle • 3 steering modes: crab steering, front axle steering, and all-wheel steering >> Including steering direction selector • Dipper stick 2.00 m incl. cylinder protection • 1x hammer/shear hydraulics (up to 120 l/min) • 2x swivel bucket hydraulics (up to 60 l/min) • 1x low-pressure return line • 1x leakage oil line • 1x hydraulic circuit for quick coupler • Rädlinger Powertilt HS08 • Ditch cleaning bucket • Electric refueling pump • Rain protection roof Rsdpfxoyfrxhe Agljn • Tires: DELCORA 315/70 R22.5 incl. mudguards • Hose rupture safety valves • Bucket cylinder protection >> for boom, adjustable boom, dipper arm & 2x bucket cylinders • Special permit, CE certification & TÜV for 40 km/h Optional: • Forestry or grass mulcher by SEPPI M. on request • Cutting head Woodcracker CL260 on request • Sorting grab DMS SG9050 on request • Branch/hedge shears or branch saws - We are an official JCB dealer (main dealer) - Please arrange an appointment before your visit. Mr. Mihm is available for you at [contact information]. Do you need transport? We work with various forwarding agents. Unless otherwise stated: Sale of used vehicles is carried out under exclusion of any warranty or guarantee. We are an authorized Mercedes Benz service partner, JCB dealer, IVECO dealer, and MAGNI dealer. Always over 700 trucks / commercial vehicles, new & used construction machinery, aerial platforms, forklifts, telehandlers, and more in stock! This offer is non-binding. Subject to prior sale and errors. Rental available. = Further information = Drive: wheel Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2022, operating hours: 999 h, YEAR OF MANUFACTURE: 2022 OPERATING HOURS: only 999 h Operating weight: approx. 11,800 kg Engine power: 109 HP / 81 kW - Immediately available & directly from the JCB dealer! EQUIPMENT • Comfort cab (ROPS/FOPS) with automatic climate control, air-suspended & heated premium seat, start-stop button • Color display with programmable settings for hydraulic attachments (liter flow, up to 20 attachments), rain protection roof • Engine auto-stop function & automatic speed reduction • Hydrostatic stepless drive >> with automatic torque adjustment 40 km/h travel speed • LED work lighting >> 2x boom, 6x cab roof front and rear • JCB EcoMAX 4-cylinder diesel engine with SCR, DPF & DEF/AdBlue • Dozer blade at rear axle • 3 steering modes: crab steering, front axle steering, and all-wheel steering Rsdpeyfrtrsfx Aglon >> including changeover of steering direction • Arm (dipperstick) 2.00 m incl. cylinder protection • 1x hammer/shears circuit (up to 120 l/min) • 2x tilt bucket circuits (up to 60 l/min) • 1x low-pressure return • 1x leakage oil line • 1x circuit for hydraulic quick coupler • Electric refueling pump • Tyres: DELCORA 315/70 R22.5 incl. mudguards • Hose burst safety valves • Cylinder protection >> for boom, adjustable boom, dipperstick & 2x bucket cylinders • Special permit, CE certification & TÜV approval for 40 km/h Optional: Holp Rototop Rotator quick coupler 08 and triple rotary feedthrough Price: €10,000 net Always in stock! • Forestry or grass mulcher from SEPPI M. on request • Cutting head Woodcracker CL260 on request • Sorting grab DMS SG9050 on request • Branch/hedge trimmers or branch saws - We are an authorized JCB dealer (A-dealer) Please schedule an appointment before your visit. Mr. Mihm is available for you at . Do you need transport? We work with various forwarding companies. Unless otherwise stated: Sale of used vehicles is made without any warranty or guarantee. We are authorized service partners for Mercedes Benz, JCB, IVECO, and MAGNI. Always over 700 trucks/commercial vehicles, used & new construction machinery, access platforms, forklifts, telehandlers, and more in stock! This offer is non-binding. Subject to errors and prior sale. Quick coupler, road approval = Further information = Drive: Wheeled Contact Tobias Ebert for more information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 7 WSA Hatz Diesel Reversible Plate Compactor / Electric Start / New machine / In stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer’s warranty Technical Data Engine: Hatz Diesel Max engine output: 7.9 kW (10.7 hp) Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Evaluates signals from the machine’s internal sensors and displays them graphically using symbols - Similar to previous engine protection on Weber MT units, the engine will automatically shut down if continued operation could cause engine damage - The operator is also shown symbols indicating how to rectify any displayed faults - If the air filter becomes heavily soiled, step-by-step instructions are shown for cleaning and replacing the filter element - The Weber Smart Assist also includes the newly redesigned COMPATROL compaction control - It provides a clear and easily understandable bar graph to display compaction progress - Operation of the machine has also been updated: following engine start, vibration is activated at the push of a button - The usual throttle lever is no longer required, as the engine speed is regulated automatically The reversible plate compactors of the CR series impress with their powerful compaction performance and maximum efficiency. This makes them the first choice for all compaction tasks from classical road and civil engineering to paving work. Well-balanced running characteristics, exceptionally smooth operation, and low hand-arm vibrations ensure high operator comfort. CR 7 Efficient machine with powerful compaction performance: Rjdpfsyfqvrjx Aglen - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle and hydraulic switching cables routed inside the guide bar for protection - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide bar - Protection for the machine and engine due to engine guard frame and cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Simple maintenance with all service points easily accessible - Safe and fast loading due to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing eyes on the engine console - Greater operating comfort with electric start - Typical applications: road construction, civil engineering, paving; thanks to its low overall height and working width, the CR 7 is also ideally suited for trench shoring We have a wide selection of different vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. On request, we are happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / New Machine / In Stock & Immediately Available Sale price: €8,990.00 net / €10,698.10 gross 3-year manufacturer warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 hp) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the machine's sensor system and graphically displays them as symbols - Similar to the previous engine protection system from Weber MT, the engine will shut down whenever continued operation could lead to engine damage - Users are also shown symbols indicating how to resolve displayed faults - If the air filter is excessively dirty, it provides step-by-step instructions on cleaning and replacing the filter element - The Weber Smart Assist also includes the compaction control "COMPATROL", now with a new design - It displays the progress of compaction on an easily readable and understandable bar graph - The machine’s operation is also improved: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engines automatically adjust to the correct speed The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the top choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running characteristics, low running noise, and minimal hand-arm vibrations provide a high level of operator comfort. CR 6 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic shifting - Throttle cable and hydraulic shifting lines routed and protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection with motor guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service—maintenance points are easy to access - Secure and fast loading using a large, foldable crane eye - Safe lashing for transport thanks to additional lashing points on the engine console - Enhanced operator comfort with electric start - Areas of use: road and civil engineering, paving, and—thanks to the low height and working width—the CR 6 is also ideal for trench shoring work We have a very large selection of various vibratory plates in stock for immediate delivery! Rsdpfxsyfqp So Aglsn Mr. Herden (phone ...) will be happy to assist you. We would also be pleased to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden (by phone at ...) will be happy to assist you. Weber CR 8 WSA Hatz Diesel Vibratory Plate / Electric Start / New unit / In stock & immediately available Sales price: €11,190.00 net / €13,316.10 gross 3-year manufacturer's warranty Technical specifications: Engine: Hatz Diesel Maximum engine power: 10.5 (14.3) kW/hp Weight: 608 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Redpfx Asyfp Awjglsn Weber Smart Assist (WSA) - Evaluates signals from the built-in sensors and displays them graphically using symbols - Similar to the previous engine protection system from Weber MT, the engine will shut down whenever continued operation could lead to engine damage - Symbols also indicate to the operator how to resolve the displayed fault - In the event of a heavily clogged air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Provides the user with a clear, easy-to-read bar graph showing compaction progress - The machine operation is also new: after starting, vibration is activated with the push of a button - There is no throttle lever, as the engine automatically adapts to the correct speed The reversible soil compactors of the CR series boast powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks in everything from classic road and civil engineering to paving applications. Their balanced running characteristics, high smoothness, and low hand-arm vibrations ensure excellent operating comfort. CR 8 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic switching - Throttle cable and hydraulic switching integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection of machine and engine via protective frame and engine cover - Reduced maintenance requirements due to self-tensioning centrifugal clutch - Easy servicing as all maintenance components are readily accessible - Safe and fast loading with a large foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Increased operator comfort with electric start - Areas of application: road construction, civil engineering, paving work, and—thanks to the low overall height and working width—the CR 8 is also ideal for trench shoring We have a very wide selection of different vibratory plates in our warehouse, all immediately available! Mr. Herden (Tel. ...) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We...

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Rodpfoyfwnbox Aglon Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Rsdpfx Aonlb Rwjglsn Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with Rjdpfx Agjnlb Rzolsn CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665.00 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank Redpfxsx Dngke Aglen - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: Rsdpfsq Sc Auox Agljn - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Travel distance: X=750mm Y=500mm Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Electrical data Supply voltage 400 V Redpfx Aow Ea Dgogljn Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm