Used C Fold for sale (56,743)

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Lhjdpfxoylmamo Ab Toc Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2007, operating hours: 1,250 h, load capacity: 200 kg, lifting height: 7,600 mm, fuel type: electric, Year of manufacture: 2007 Lhsdpfx Aox Hgnhob Toc Empty weight: 6.700 kg GVW: 6.900 kg Dimensions (LxBxH): 605 x 150 x 197 cm Mast: articulated arm Working height: 1.500 cm

Condition: good (used), mileage: 677,030 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,330 mm, total width: 2,550 mm, total height: 3,970 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Accessories = - Second diesel tank - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Sleeper cab = Remarks = Number of axles: 2, Configuration: 4x2, Dual tires, Unladen weight: 8,476 kg, Gross weight: 21,000 kg, Total tank capacity: 1,420 liters, Second diesel tank, Fifth wheel height: 114 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Lane departure warning, Climate control, Seat heating, Engine power: 338 kW (453 Hp), Fuel type: Diesel, Euro: 6, Transmission type: Automatic, Transmission brand: Scania, Speed limiter, Gears: 14, Power steering, ABS, ASR, Starter battery, Central locking, Seat layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14 gears, automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steering axle; Tread depth left: 7 mm; Tread depth right: 7 mm; Suspension: leaf suspension Axle 2: Tire size: 315/70R22.5; Twin tires; Tread depth left inner: 5 mm; Tread depth left outer: 5 mm; Tread depth right inner: 5 mm; Tread depth right outer: 4 mm; Suspension: air suspension Weights Unladen weight: 8,476 kg Payload: 12,524 kg Gross Vehicle Weight (GVW): 21,000 kg Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Lhsdpfxow Da E Uj Ab Tjc Financial Information Leasing price: €351 per month (default, 60 months); Please inquire for further information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? It’s simple! • Large, fast-rotating stock • Recognizable quality • Attractive prices • Proper commercial conduct • Multilingual staff • We understand our customers • Support with import and transport • (Export) license plates are arranged quickly • Expert technical service • The assurance of “recognizable quality” • And more… Please visit our website for special offers and our full stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 670,848 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 6,300 mm, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Equipment = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Device) - Sleeper Cab = Notes = Number of axles: 2, Configuration: 4x2, Twin tires, Unladen weight: 8,476 kg, Gross weight: 21,000 kg, Total tank capacity: 1,420 liters, 2nd diesel tank, Fifth wheel height: 113 cm, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting: Halogen lamp, Speed limiter, Lane keep assist, Heated seats, Engine power: 338 kW (453 hp), Fuel: Diesel, Euro 6, Transmission type: Automatic, Gearbox make: Scania, Speed limiter, Gears: 14, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: SCA, 14-speed, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steerable; Left tire tread: 2 mm; Right tire tread: 2 mm Axle 2: Tire size: 315/70R22.5; Twin tires; Inner left tread: 5 mm; Outer left tread: 5 mm; Inner right tread: 4 mm; Outer right tread: 4 mm Weights Unladen weight: 8,476 kg Payload: 12,524 kg Gross vehicle weight: 21,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: €351 per month (default, 60 months); Please inquire for further information and terms. Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands across various years of manufacture and price categories. Why buy from Kleyn Trucks? Simple! Lhsdpsw Da E Isfx Ab Tsc • Large and fast-changing inventory • Recognizable quality • Competitive prices • Reliable business conduct • Multilingual service • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 368,041 km, power: 122 kW (165.87 HP), first registration: 06/2006, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: other, number of seats: 3, total length: 6,800 mm, total width: 2,270 mm, total height: 3,330 mm, loading space length: 4,170 mm, loading space width: 2,130 mm, loading space height: 2,380 mm, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional options and accessories = - Tachograph (control device) - None - Tail lift = Remarks = Configuration: 4x2, twin tires, unladen weight: 4,030 kg, gross vehicle weight: 6,500 kg, cab type: single cab, tachograph (control device), parking aid: none, color: white, lighting type: halogen lamp, engine power: 122 kW (164 HP), fuel: diesel, Euro 3, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, starter battery, roof rack: none, rear closure: tail lift, seats: 3, seating arrangement: 1+2, seat adjustment: manual, tail lift, tail lift version: rear flap, lifting capacity of tail lift: 1,000 kg, tail lift manufacturer: Dhollandia, tail lift material: steel and aluminum, tail lift dimensions: 180x215, 3.0 ltr tailgate, spare wheel, spare wheel tread: 8 % = Further information = Axle configuration Lsdpfx Absykyxts Tehc Tire size: 225/75R16 Brakes: disc brakes Axle 1: Tire tread left: 1 mm; tire tread right: 4 mm; suspension: trapezoidal suspension Axle 2: twin tires; tire tread left inside: 7 mm; tire tread left outside: 7 mm; tire tread right inside: 7 mm; tire tread right outside: 7 mm; suspension: leaf spring suspension Weights Unladen weight: 4,030 kg Payload: 2,470 kg Gross vehicle weight: 6,500 kg Functional Tail lift: Dhollandia, rear flap, 1,000 kg Loading platform height: 100 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration number: KLEYN1

Condition: excellent (used), Year of construction: 2011, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of manufacture: 2011 Travel distances: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping area: 2,900 x 750 mm Pendulum machining: 2 x 945 x 800 mm Table load capacity: approx. 2,800 kg Taper: SK 40 Tool magazine: 30 stations Spindle speed / Celox motor spindle: 12,000 rpm Accessories: - Slant bed coolant system 900 l / 25 bar - Scraper belt conveyor - M & H infrared receiver - M & H measuring probe Ledpjyk Thnsfx Ab Tshc - 3D Formingstar package - Handheld control unit HR 410 - Torque support

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2021, operating hours: 1,273 h, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 600 kg Delivery terms: EXW Transport dimensions (LxWxH): 3,15x0,76x2 Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon C6e * 2021 Ledsyk H Saepfx Ab Tshc * 1273 working hours * Lithium-ion battery * Remote control * Fully equipped * 16.4-meter working height * 14.4-meter horizontal reach * 3150 kg lifting capacity * Equipped with articulated legs * 2800 kg net weight * Recently fully serviced and maintained

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, drive type: Elektro, High-lift pallet truck Ljdpfeylqqcsx Ab Tjhc Load center: 600 Mast type: Duplex Condition: New unit Technical condition: New Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: 80 - 100%

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahlfolder KD 66/ 4KTL - FD Year 2001 Description: - 16 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahlfolder KD 66.1/4 Ljdpfeykz Sbox Ab Tjhc - Parallel fold unit with 4 buckle plates: 66cm - Perforating shaft - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Heidelbrg Stahlfolder - Stream delivery

Condition: used, Year of construction: 2012, Folding machine MBO B30/644 Year: 2012 Description: - 32 page folder Feeder - Round pile feeder - Pump Buckle folding unit: 1st MBO B30-E-1-76/6 - First buckle folding section with 6 buckle plates - Maximum infeed width: 76 cm - Perforating shaft - Excluding noise hoods Buckle folding unit: 2nd MBO B30-E-2-76/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 76 cm Ledpfx Absykz Hrj Tshc - Perforating shaft - Excluding noise hoods Buckle folding unit: 3rd MBO B30-E-3-38/4 - Fourth buckle folding section with 4 buckle plates - Maximum infeed width: 38 cm - Excluding noise hoods Separate knife folding unit MBO Z6 MBO stream delivery: A76

Condition: used, Measuring and marking plate cast steel gray cast iron heavily ribbed STIEFELMAYER Lhsdpfx Asdzqpzsb Tsc from a measuring or scribing machine with hand-guided measuring arm Machine. No. 8530979 Year of construction approx. 1989 length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm panel thickness 70 mm throughout - surface machined laterally at a 90° angle 3000 x 360 mm - 6 height-adjustable feet - plus 1 measuring arm, mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm space requirement L x W x H 3000 x 2000 x 2500 mm weight approx. 5000 kg very good surface

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Ledpfx Abodzqmrj Tshc Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator Lsdpfx Aoh U Dtuob Tjhc - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg Lsdsh Uhqyopfx Ab Tohc very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole Lhjdohrakvspfx Ab Tjc - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Ledsv Uraajpfx Ab Tshc Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. Ljdpfx Asr I E Iteb Tjhc throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Ledpfx Aopwpxcsb Tjhc Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW Lhodpfeyk Diisx Ab Toc weight of the machine ca. 4800 kg dimensions of the machine ca. 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 1000 mm work height max. 900 mm total power requirement 22 kW Ledpfsyk Dicox Ab Tshc weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backstop, 1000 mm - Motorized upper crossbar adjustment - Motorized lower crossbar adjustment - Side protection - Foot switch - Operating instructions

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, Lsdpfxsyia T Se Ab Tjhc 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, LS 704 C - glass scale with reading head Length: ML 720mm HEIDENHAIN LS 704 C Lsdpfx Absylcwhj Tohc ID 23713415 SN: 4521917K

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. Lhodpfx Absylw Stj Tjc • Tool magazine: 30 stations • Table: Rigid clamping table • Coolant system • Electronic Thermal Compensation (iTNC) • Machine on hours: 11,927 h • Spindle on hours: 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 20 - 6300 U/min Number of tools 30 St. tool taper SK 40 total power requirement 17 kW weight of the machine ca. 4 t Lhodsw Inr Aspfx Ab Tec dimensions of the machine ca. 3,2 x 3,4 x 2,2 m

Condition: ready for operation (used), Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts Lhodpfx Aexacfysb Tec * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)