Used Cable Granulieren System Kabelrecycling Cable Granule Plant Eurea for sale (7,660)

Year of construction: 2012, condition: excellent (used), Kallfass stacking plant Fsdpshgh Ndjfx Ah Uegi

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Helios, Granule dryer, granule conveyor, Heliostat -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos Fjdpfx Ahexu Atme Uogi -Number: 4 devices available -Price: per piece -Dimensions: 930/670/H2870 mm -Weight: 123 kg/unit

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear Fgodpfx Asxd T Hceh Uji - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine Fodpfoxu Dipex Ah Uegi • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: excellent (used), Cable with strain relief for cranes 12 x 1.5 mm² Price per meter: 5.50 Fjdpfx Asxt Dmrsh Uogi

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Fjdoxt Uvqjpfx Ah Uogi

Year of construction: 2012, condition: excellent (used), Kallfass stacking plant Fedpfx Ahehgh Nhe Usgi

Condition: used, Please contact ATS Norway for more information Fedpfexrabpex Ah Usgi Please provide reference number upon request: 21675 Description:Powerscreen screening plant from the 1980s.Starts and runs well – new battery installed.Conveyor belts are showing some wear.Can be delivered on short notice. Own weight: 1 Model: sorteringsverk

Condition: good (used), Year of construction: 2023, operating hours: 60 h, functionality: unexamined, Equipment: Methor "hook lift" basic package - 24 V electric control - maintenance-friendly engine compartment with LED light - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning - paintwork: RAL 2011 deep orange Additional equipment: Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Fjdpfovrw Tmjx Ah Uegi Additional hydraulic connection 70 l/min

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: Fgjdpoxa Dqdofx Ah Uoi - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Fedpfx Ahexvc Rze Uegi Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Fjdpfx Ahogmh H To Uogi Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 990 mm, total height: 1,595 mm, DGUV certified until: 12/2027, overall weight: 258 kg, empty load weight: 258 kg, input frequency: 50 Hz, Baguette – Long Roller Sinmag Model: SM2-380 Baguetto Capacity: min. 50 – max. 1200 g depending on dough hydration with felt belts for soft doughs Rolling width: up to max. 750 mm Extendable stainless steel discharge plate Only with us: DGUV V3 safety inspection Connection: 400V, 550 Watt, 16A-CEE plug Dimensions: 995 x 690 x 1595/1650 mm (W x D x H) Feed height: 1480 mm Weight: 258 kg Fedpfxouytxrj Ah Uegi NEW machine – SAB inspected 24 months warranty + service Option: Leasing & rental service Maintenance contract E-Box Service package Mobile base frame Guide for sandwich loaf Delivery service Commissioning & operator training More bakery machines in stock!

Condition: used, Year of construction: 2018, Manufacturer: COTEC, Serial No. 8918040020, control: Beckhoff, touch panel operation, manual glass loading, working area approx. Ø 600 x 500 mm, drying, workpiece automation, safety devices, control and switch cabinets Fsdpsxg Hu Esfx Ah Usgi

Condition: excellent (used), Year of construction: 2022, operating hours: 912 h, functionality: fully functional, Technical data Mini Rex Futura head machine: - 2-row operation - Hourly output at set 33 cycles/min up to 3,960 pieces - Equipped with enlarged dough hopper, dough intake rollers, and dough dividing stars for a maximum dough capacity of 15 kg - The dough hopper is secured against manual intervention by a light barrier - Weighing drum made of dough-repelling plastic material - SKG63 stamp for 40-105 g round-moulded products, depending on dough type - RK64 stamp for 45-100 g rustic products, depending on dough type - Infinitely adjustable grinding eccentric - PLC control with 12-line display at the control panel with the following control options and features: --- Individual dough piece weight and quantity produced --- Desired output – cycles/min. --- Moulding speed and moulding pressure --- Flour application in the weighing area --- Step movement of dough pieces on the discharge belt --- Recording and display of malfunctions --- Storage of up to 50 work programs - Swivelable head machine for manual removal – on operator side - Spreader belt for connection to proofing cabinet G2000 - Control cabinet cooling already installed by manufacturer Technical data G2000 proofing cabinet: - Approx. 100 hangers for a pre-proofing time of approx. 6 minutes at set 17 cycles/min. (equivalent to about 2,040 pcs/h) - Proofing and relaxation cabinet without climate control - 2-row cup hangers, T = 135, for single dough piece weight up to approx. 75 g (depending on dough type) - Flour dusting for empty hangers - Removable flour duster before stamping head - Stamping head for Kaiser rolls K2 - Discharge from hangers onto subsequent mesh belt - Transfer to form station consisting of: --- Lower belt with constant speed Fgjdpfxoxtpzus Ah Usi --- Pre-pressing roller --- Turning claws (e.g., for twisted bread rolls) --- Adjustable pressure plate --- Single-row, foldable transverse discharge belt on operator side --- Max. transfer height 1,140 mm, extends 500 mm laterally from the machine Technical data overall system: - Complete system mounted on stainless steel base frame with castors - With swing doors for easier cleaning access - Rated power: approx. 3 kW - Total weight: approx. 980–1,020 kg - Year of manufacture: 2022 / Commissioned at end of April 2022 - Only 912 operating hours (status: 01.10.2025) New price in this version & configuration: approx. EUR 115,000

Condition: good (used), Year of construction: 2018, functionality: fully functional, Sandblasting Cabinet Type STK 690 M Year: 2018 Technical Data Fodpfxjxrzf As Ah Usgi Manufacturer: Made in Europe Model: STK 690 M Year of manufacture: 2018 Volume with floor: 500 L Volume without floor and bridge: 690 L Power consumption extraction unit: 1300 Watts Load capacity: 225 kg Dimensions: approx. L 1.2 x W 1.1 x H 1.8 m Weight: approx. 110 kg Features - 690 L total volume - Integrated extraction system - Internal cabin dimensions: H 600 x W 1170 x D 760 mm - Air requirement: 400 to 700 liters/min, 15-25 cfm - Working pressure: 3.4 to 5.5 bar, 40-80 psi - Max. allowable pressure: 8.5 bar, 125 psi - Extraction capacity: 3.6 m³/min All information subject to change without notice. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels Fgedpfoxvc N Djx Ah Usi 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 40 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear Fjdpfx Ahjb Ny Eys Uegi

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, Sourdough – Rapid Fermenter Model: Hema BRSSF 100 with external LED control Fgjdpfjvdkt Rjx Ah Usi approx. 20 – 100 kg total rye flour with timer Stainless steel construction Connection: 400V, 16A CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Options: Delivery service Maintenance contract Service package Instruction & commissioning Many more bakery machines in stock!

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Fgjdpfx Ajh S H T Ueh Uji Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 2,300 mm, total length: 750 mm, total height: 1,380 mm, DGUV certified until: 12/2026, year of last overhaul: 2025, Lippelt Rumo Seed Station Lippelt Model Rumo 6 Single-sided and double-sided humidification in water bath Single or double-sided seeding possible Robust technology Stainless steel construction, mobile Connection: 400V, 16A CEE plug Dimensions: L 2300 x W 750 x H 1370 mm Fodpfx Ahjw Ttl Sj Uegi Used machine, cleaned With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Seed disc Maintenance contract Delivery service E-Box for increased safety Instruction & commissioning More bakery machinery in stock!

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Including: + profile rotor for increased throughput Options: Double row of knives + 895 € net Veneer and paper scraper + 970 € net * Recommended for extremely thin materials with a thickness of less than 3 mm Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation. We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Blades: multi-rotatable, Rotor diameter: 260 mm, Control: PLC Siemens S7-1200, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 qbm, throughput 1 - 5 hopper fillings / h, hydraulically operated pusher, Screen perforation of your choice (10 - 40 mm), suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30 % atro. Included as standard: - Fast hydraulics - Profile rotor - Switch cabinet with Siemens PLC control - Automatic star/delta start - Automatic OFF when the rotor is idling - Removable suction chute - Speed 70 - 100 rpm for higher throughput capacity - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Stable guides for the hydraulic slide Other shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm Fgsdpod Db N Isfx Ah Usi - Overbelt magnet + 5.980 € net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) . Requirements for the output or raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry Fgedpfx Aogmfa Aoh Usi approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, The ideal machine for shredding both hardwood and softwood. Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: PLC Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation as per choice (12 - 40 mm) Suction port Ø 160 mm Fsdpfxswzarcs Ah Ujgi Weight: approx. 1,100 kg Dimensions (LxWxH): approx. 1805 x 1118 x 1650 mm Color: blue / grey The following options are available at extra cost: - Raise the shredder by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control unit for conveyor belt and overband magnet + €2,750 net (start and stop synchronised with the shredder) Requirements for the raw material: - The moisture content (absolutely dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. result in increased wear. We are pleased to offer you a free test with your material. You are invited to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight carrier and we will document the test with photos and videos.

Condition: new, Year of construction: 2025, one machine ready produced Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request Fjdpfsgbkkrox Ah Uegi --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear