Used Cantilever for sale (229)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Nodpfsmhh Anjx Akaolc When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) Nlsdpfxeguk A Hj Akaec - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation Nlsdpfjmhhy Nox Akajc - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Nedeguk Dkjpfx Akaolc Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg Nlodpfx Aemhh Dtjkaec - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. Nlodpfxoguk Dve Akajc When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: WILres, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Nljdpfoy Hpbdex Akasc Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Nledpfx Aksh Rit Ejajc Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Nsdpfx Akjtqf Rzeaolc Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) Njdjx Sz A Rspfx Akaslc • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Nledpfxoyn Ny Uj Akaoc Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 2,000,000 kg, shelf height: 7,080 mm, total length: 128,800 mm, number of shelf rows: 14, shelf length: 18,400 mm, load capacity per storage section: 145,000 kg, Equipment: double-sided, We are offering this very well-maintained OHRA PIII pallet racking system, year of manufacture 2006. If you have any questions or require further information, please feel free to send us a message or call us. Nlodpfx Aeyzzipskaoc

Year of construction: 2009, condition: used, Apple 15 head depositor Njdpfeb Ucwkjx Akaolc Model: CCP12 Stainless cantilever framed 15 head machine

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Nodpjhw Nfqjfx Akajlc Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Nlsdjlhwr Rspfx Akaoc Good condition

Condition: new, Year of construction: 2025, I am selling several machines, equipment, etc. for woodworking here, including forklifts, aerial work platforms, as well as accessories and spare parts. Therefore, be sure to check out my other auctions as well! Panel saw, table saw, circular saw, joiner's circular saw, format saw WH Machines Type: Z45 - 400E Professional New wide aluminum format carriage 320 cm with hard metal round bar guide system Width approx. 415 mm Extension table with extendable aluminum rip fence, incl. 2x folding stop Rip length up to approx. 300 cm Electric height adjustment of the saw blade Stable round bar guide for the saw unit. Electric tilting of the saw blade up to 45° with digital display of the tilting angle Precise tilting segment guide for the saw unit. Parallel fence up to 125 cm with fine adjustment Stable 50 mm round bar guide Parallelogram guard with upper extraction can be folded away for vertical workpiece cuts. 2 different speeds adjustable (4000/600 rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring saw with 120 mm scoring saw blade and electric height adjustment Motor power main motor 5.5 kW with overload protection and thermal monitoring. Motor power scoring saw 1.1 kW Body made of stable 6 mm box construction with reinforcement Stable cast iron worktop Nlodpfx Akoh Hauyjaoc incl. rip fence wedge and eccentric workpiece holder The machine can also be purchased through a lease-purchase agreement with a term of 36 months. This offer is a lease-purchase leasing offer via DLL Leasing with a term of 36 months. Credit check and processing are carried out by DLL Leasing. Other terms and conditions available upon request. Please inquire for further data, delivery times and availability. Depending on availability, the machine can be inspected and tested at our warehouse. A prior inspection is highly recommended; simply leave your phone number by email, and I will get back to you regarding an inspection appointment. Subject to prior sale, all information without guarantee. The machines can be picked up by the customer or shipped via freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, they may vary; please inquire. An invoice with VAT will be issued.

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Span: 24 m Nledpjyx Dyfsfx Akaoc Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Hook travel: 8 m Radio control Complete with crane rail

Year of construction: 2023, condition: like new (used), functionality: fully functional, 1x BKRS gantry crane Working load: 2 x 20,000 = 40,000 kg Span: 29 m Cantilever: 2 x 8.9 m Lifting height above rail: 10 m Nlodpfx Akjyx Dv Tsaec Hook path: 13.5 m Radio remote control Cable reel suitable for 90 m Complete with crane rail UIC60, length: 2x 180 m

Condition: like new (used), functionality: fully functional, Year of construction: 2019, 1x BKRS gantry crane Nodpsyx Dlhofx Akaelc Rated load: 50,000 kg Span: 21.5 m Cantilever: 2 x 6 m Lifting height above rail: 10 m Hook travel: 45 m Radio remote control Cable drum suitable for 110 m Complete with crane rail UIC60 length: 2x 110 m The crane was used for a tunnel boring project Demag components

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Crane runway made from Demag KBK1 + 2 rails Njdpfx Akomqf Nfoajlc System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine solid polymer concrete machine body Nlsdpfx Akjyvfuwsasc cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate Nledpfx Askm Rynekaec - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. Nlodshp S Trepfx Akasc The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY-DUTY Drying Rack / Cantilever Rack – for the most demanding applications The most important facts at a glance: 1. Ball-bearing slide for width adjustment from 1.70 to 3.00 m span. 2. Space-saving, as they can be nested inside each other. 3. Large gap of 135 mm for easy loading, even with a fast work pace. 4. Vertically standing, square-profile beam, for minimal contact area. 5. High usable depth of 1,000 mm. 6. High load capacity of 1,000 kg. 7. Very good rollers that make it easy to move the racks, even when loaded. Simply high quality, "made in Denmark". The racks are usually available for immediate delivery from stock. To save on shipping costs for our customers, we pack the racks pre-assembled (see image). Assembly is very quick. Nledpfofiuhvex Akasc Do you have any questions? Contact us, we will be happy to help!

Condition: used, Cantilever racking, heavy duty racking consisting of: -Shelf: with 2 stands each -Support arms: double-sided Nsdpfx Akjd Eqlpoaolc -6x ledger depths: 900/500/400/300/230 mm -welded -Also: other quantities and heights available on request -Number: 1x shelves available -Transport dimensions: 2100/2020/H2170 mm -Own weight: 430 kg/piece