Used Cantilever for sale (206)

Condition: like new (used), Year of construction: 2018, operating hours: 183 h, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, Options: VERY unique CONTRA stacker!! Fully equipped! Features: FFL mast = Full Free Lift, side shift, mast tilt, pantograph, extra wide fork carriage; width = 1230 mm, blue spot & strobe light, lateral battery change system, with cantilever adjustable forklift forks, suitable for all types of pallets, power steering, complete and LIKE NEW! Fjdpfx Afsx Ruatsnofu

Condition: like new (used), Year of construction: 2018, operating hours: 214 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, Manufacturer + model: LINDE L 20 as (1173) * EX * Proplan 2GD / Zone 1-21-22 Mast: 3F4000 ID: 24114.0442 Category: Demo Mast: 3F4000 Lowered height: 1920 mm Lifting height: 4000 mm Capacity: 2000 kg Year: 2018 Hours: 214 hours Battery: Completely NEW * 24v / 315ah * Year 2025 Options: * EX * Proplan !!!!! System = EPS 16 ATEX 1137 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 ===== Dust group = IIIC Type = Cat 2D (permitted in ZONE 21 and 22) Temperature class = T 120°C ----- Very UNIQUE ATEX explosion-protected “DEMO” WIDE TRACK - with CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets - Also equipped with ADJUSTABLE support legs Fjdpfx Aox Rt T Ssfnsfu POWER STEERING Complete LIKE NEW!!

Condition: like new (used), Year of construction: 2009, operating hours: 2,498 h, load capacity: 1,600 kg, lifting height: 2,400 mm, fuel type: electric, mast type: duplex, construction height: 1,740 mm, Manufacturer + model: SICHELSCHMIDT D 1216 ASM * EX * 2G / Zone 1 Atex Mast: 2F2400 ID: 24112.5427 Category: Used Mast: 2F2400 Fjdpfex Rt T Eox Afnefu Lowered height: 1740 mm Lifting height: 2400 mm Capacity: 1600 kg Year: 2009 Operating hours: 2498 hours Battery: Completely NEW * 24V / 460Ah * Year 2024 Options: * EX * Atex - Sichelschmidt !!!! FFZ system - Type: D1216E PTB 02 ATEX 3150 Gas = IIB Type = Cat 2G (approved for Zone 1 and 2) Temp. class = T4 Very unique!! - Wide-track stacker with reach mast - Freely adjustable cantilever forks - FFL mast with tilt function - New stainless steel forks

Condition: new, Year of construction: 2020, operating hours: 45 h, load capacity: 1,300 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, Manufacturer + model: HUBTEX / GENKINGER EGP 13/44 So Mast: 3F4500 ID: 24053.0388 Category: New Mast: 3F4500 Forks: 1200/2000 mm Lowered height: 2140 mm Lifting height: 4500 mm Capacity: 1300 kg Year: 2020 Operating hours: 45 hours Battery capacity: 24 V / 345 Ah Options: VERY unique SPECIAL wide-track design!!! - LIFTING CAPACITY 1300 KG @ 1200 mm - Equipped with spreader!! - VETTER click forks 1200 -> 2000 mm!! - Proportional lift & lower valves Ffodpfex Rt Snsx Afnou - With cantilevered forks - SUITABLE for all types of pallets - Width between support legs: 1340 MM!! Power steering, condition LIKE NEW!!

Condition: like new (used), Year of construction: 2017, operating hours: 41 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Options: VERY unique CONTRA stacker! Equipped with: - MAST with tilt function - CANTILEVER adjustable forklift forks Ffjdpfxsx Rt R Dj Afneu - SUITABLE for all types of pallets - POWER STEERING!!!

Condition: like new (used), Year of construction: 2013, operating hours: 82 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,540 mm, Manufacturer + model: LINDE L 16 as K - (131) Mast: 2F2850 ID: 23032.0316 Mast type: 2F Lowered height: 2540 mm Lifting height: 2850 mm Capacity: 1600 kg Year: 2013 Operating hours: 82 hours Battery: 24 V / 375 Ah - NEW - Year 2025 Options VERY unique!! WIDE TRACK with electric chain hoist (Year 2015) Brand = SEITH Type 05/31 - Lifting capacity = 125 kg!! - Full free lift mast - PROPORTIONAL lifting & lowering valves Ffjdpox Rt N Tofx Afnsu - With CANTILEVER adjustable fork tines - SUITABLE for all types of pallets - Also equipped with ADJUSTABLE stabilizer legs POWER STEERING Complete LIKE NEW!!!

Condition: like new (used), Year of construction: 2016, operating hours: 101 h, load capacity: 1,400 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Manufacturer + model  STILL EXP 14 Atex * EX * Mitrex - 2GD - Zone 1 and 21 and 22  Mast 2F2900 ID 22123.0042 Cat. Demo Mast 2F2900 Lowered height 1920 mm Lifting height 2900 mm Capacity 1400 kg Year 2016 Hours 101 hours Capacity 24v / 345ah Options* EX * Mitrex !!!!! System = ATEX 94/ 9 / EC - Conform 2014 / 34 / EU Gas group = IIB + IIIB Type 2GD - Exd dB 11B T5 Gb (allowed in Zone 1 and 21 and 22) Temp class = T5 (85 *C)Wide track * EX * version Fsdjx Rt Nmjpfx Afnofu - PROPORTIONAL lift & lower valves- with CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets - also equipped with ADJUSTABLE support legs POWERSTEERING

Condition: used, Container (stackable container) sheet steel Assorted storage containers – Bulk storage bins – metal storage boxes – open front bins, used Schäfer boxes. Various designs (painted, galvanized, closed, perforated, with recessed grip) and different sizes / stackable. Dimensions: 30 x 50 x 20 cm + 37 x 37 x 11 cm Stackable boxes available at an attractive price. Ideal for transport and storage. Fedpfx Afeg U Am Tenjfu Price / details on request All technical data subject to typographical error/mistake. We sell exclusively to countries within the European Union.

Condition: used, Year of construction: 2003, functionality: unexamined, carrying capacity per cantilever arm: 1,000 kg, load capacity per stand: 4,000 kg, We are offering this used G. SIMON & Co cantilever heavy-duty racking system, year of manufacture 2003. Type: Order No.: 2953 Year of manufacture: 2003 Maximum load per arm: 1,000 kg Maximum load per side (upright): 4,000 kg If you have any questions or require further information, please feel free to send us a message or call us. For sale is a heavy-duty double-sided cantilever rack from G. SIMON & Co. Lagertechnik (built in 2003). Ideally suited for the storage of long goods such as pipes, profiles, bar stock, strips, panels, etc. The racking is of robust construction and designed for heavy loads. Technical data: Manufacturer: G. SIMON & Co. Lagertechnik (Hamburg) Year of manufacture: 2003 Order No.: 2953 Version: double-sided Cantilever arms: approx. 8 per rack (4 per side) Load capacity: 1,000 kg per arm Fodpjx Stcpefx Afnsfu Max. load capacity: 4,000 kg per upright side Scope of delivery: 1x double-sided cantilever rack incl. approx. 8 cantilever arms (scope of delivery according to photos/listing). Note: Dimensions (height / arm length / bay length) available on request or after measurement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 2,000 h, degree of automation: automatic, actuation type: electric, Horizontal Flow-Pack Packaging Machine – Complete Configuration • Complete horizontal Flow-Pack electronic packaging machine with rotary sealing jaws and top-mounted film reel holder, constructed with a painted steel frame (RAL 9007). • Cantilever construction: all mechanical transmissions located at the rear, fully separated from the product path. • Infeed conveyor belt, 2800 mm long, equipped with bridge and AISI 304 stainless steel side guides. • Pushers and pusher supports made from food-grade approved plastic material. • Hermetic longitudinal sealing system, achieved by three independent sets of rollers (Ø120 mm each): • First set: film pulling • Second set: sealing • Third set: guidance • Equipped with pre-heating system and cooling units. • Transversal sealing jaws, 300 mm wide, fitted with cutting knives. • Electronic torque limiter and low-pressure system on transversal sealing jaws. • Drive system with three Schneider Lexium 28 brushless motors: • One for infeed conveyor • One for longitudinal sealing rollers • One for transversal sealing jaws • Managed via 3 Schneider Lexium 28 digital inverters. • Automatic centering system for the film reel holder (600 mm opening), cantilever mounted on the upper section. • Outfeed conveyor belt, 1 meter long, with separate motor and inverter control. • Safety guards made from impact-resistant plexiglass, equipped with safety micro-switches. • 7” color touchscreen with memory and recall functions for: • Machine speed Ffodpfox Uy Udex Afnou • Bag length • Temperature setting • Jaw deceleration • Pusher position for progressive product discharge • Accessory activation • Program memory: up to 99 recipes • Adjustable forming box • Machine operation: left to right • Pneumatic components: FESTO • Manufactured in accordance with CE standards Technical Specifications • Power supply: 400 V, 3-phase, T+N • Packaging speed: • 80 pcs/min for products 220 mm (L) × 70 mm (W) × 70 mm (H) • 10 – 120 packs/min (depending on pack length) • Package dimensions: • Length: 80 – 600 mm • Width: 10 – 290 mm • Height: up to 110 mm • Machine dimensions (L × W × H): 3800 × 1000 × 1900 mm • Weight: 600 kg • Installed power: 3 kW • Voltage/frequency: 400 V / 50 Hz / 3-phase Optional Equipment / Additional Features • Printer interface and preview (signals and control via touch panel) for VIDEOJET 6330 • Belts on longitudinal sealing jaws for better product handling • Motorized film unwinding • Film mark photocell • Pre-installed for Modified Atmosphere Packaging (MAP) with gas pipe and solenoid valve • U-shaped slit sealing jaws • Automatic film reel centering

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Chairs: Fodpfxjiiv Ike Afnsfu - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally.

Condition: good (used), Year of construction: 2014, functionality: fully functional, load capacity: 15,000 kg, total length: 7,000 mm, total height: 2,255 mm, Equipment: double-sided, With double-sided swiveling front attachment, 5 pull-out drawers, unladen weight: 4,830 kg, with roll-out mechanism. Fedpfx Afox An Tnensfu

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Ffodpfxsh Nx R To Afneu Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Fjdspiarnopfx Afnjfu Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat Fjdpfxotqf Rzs Afnjfu

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions. Fodpfsmqf Nbsx Afnofu

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 construction of year:2011 DN:50 Nominal flow 40 m³/h Fjdsh Rwafspfx Afnjfu Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Condition: good (used), Year of construction: 2012, Cantilever rack, double-sided Length approx. 5.0 m, height 2.0 m For sale is a complete META Multistrong-L cantilever rack in robust industrial quality. Technical data: Fodpfxsx A Iv Ae Afnjfu • Manufacturer: META, Model Multistrong-L • Upright height: 2000 mm • Bay length: approx. 1000 mm • Total length: approx. 5000 mm • Total depth: approx. 1420 mm • Load capacity per arm: 140 kg Comprising: • 6 uprights, IPE 120, height 2000 mm • 60 arms, length 600 mm • Bracing + all bolts included Price: €1,000 net • The rack is disassembled and ready for immediate collection. Collection: 97514 Oberaurach Payment: • Cash on collection • Advance bank transfer • PayPal An invoice with VAT shown will, of course, be provided. Price is net ex-stock (97514 Oberaurach).

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley Ffedpfx Afstqwrvjneu - Original paint yellow dead weight 170 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: MBHF-4BR125, DEMAG KBK crane sky crane runway dimensions approx. 33x6.5m + 4 cranes Payload / lifting load 4x125 KG - 0.125to The crane can also be halved in length Technical data of the system: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, trailing cables, power supply, holders/hangers, etc. incl. 4 bridges with 125KG chain hoist 3x Demag DC-COM + 1x steel Crane is dismantled and available immediately Fsdpfxem Tvvij Afnefu Very good used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled Ffedswkpyhjpfx Afnsu - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited Fodpfxexw Nv Hj Afnofu C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Designed for the Toughest Demands Key Facts at a Glance: 1. Ball bearing sliding rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. High intermediate clearance of 135 mm for easy loading even at fast work cycles 4. Upright square tube support for a minimal contact area Ffsdpofiuhvjfx Afnou 5. Generous usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality casters for effortless movement, even when loaded Genuine high quality – made in Denmark. The trolleys are generally available directly from stock. To reduce shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Final setup is very quick and easy. Do you have any questions? Contact us – we are happy to assist!

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, overall weight: 1,000 kg, spindle speed (min.): 1,400 rpm, spindle speed (max.): 7,000 rpm, number of spindles: 1, type of input current: three-phase, TECHNICAL DATA & EQUIPMENT: Serial Number: 765 Operating Voltage: 380 V Frequency: 50 Hz Rated Current: 14 A Voltage Range: Geb Azzknsw D T T Sodoka (context unclear; possibly placeholder or specific manufacturer code) Centre Height Universal Dividing Head: 170 mm Centre Height Tailstock: 120 mm Centre Height Tailstock with Intermediate Bearing: 170 mm Max. Workpiece Diameter Between Centers: 338 mm Max. Workpiece Diameter in Cantilever Mounting: 600 mm Max. Distance Between Centers: 950 mm Internal Taper Dividing Head Spindle: Morse Taper 4 (MT 4) T-slot Size Machine Base: 12 mm T-slot Size Other Parts: 8 mm Movement Range: Grinding Stroke Travel: 190 mm Cross Movement Tool Holder: 100 mm Height Adjustment Grinding Head: 325 mm Grinding Spindle Infeed: 5 mm Coarse Adjustment Travel Tool Holder: 230 mm Grinding Head Slide: 800 mm Fsdpew Nn Akefx Afnjfu Universal Dividing Head on Tool Slide: 330 mm Swivel Range Grinding Head Slide: 360° Grinding Head: 360°, Tool Holder: 360° Universal Dividing Head Horizontal and Vertical: 360° Maximum Grinding Length for Helical Grinding: 190 mm Max. Rotation of Dividing Head Spindle for Helical Grinding: 1.5 revolutions Max. Grinding Wheel Diameter: 125 mm Max. Cut-Off Wheel Diameter: 200 mm Spindle Speed: 1,400 – 7,000 rpm The machine is equipped with a two-axis optical measuring system, dressing device, table extension with tailstock, and matching accessories. Contents include tool holders, clamping equipment, a helical grinding device, radius grinding device, a tool post, and various accessories. NOTES ON COLLECTION: Loaded onto truck, forklift available. Available immediately.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Fedpfx Afsvmwxxonofu Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.