Used Cantilever for sale (201)

Year of construction: 2021, condition: new, Cantilever rack, single sided, 3m height, 1.20m arms, 750kg per arm - New - : Price ex location incl. loading! 1 racking unit with 4 uprights 1.988.-€ (net)! Surcharge for cantilevers with deflectors for this rack: 40.-€ Transport costs within D (without islands): 430.-€ (net)! Of course they can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights one-sided approx. 3,000 mm high, hot-dip galvanized, IPE 160 base and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600mm 750 kg per arm / 2250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3.000 kg, arms IPE 100, with longitudinal and diagonal bracing e = 1300 mm, standard is 1.30m - so if you do not specify otherwise we deliver the rack with a center distance of 1.30m. Other center distances are possible e.g. 1m, 1,25m against small surcharge also 1,50m or special dimensions! As a standard delivery, the length of a shelf row with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without floor anchors. Blsdpfx Agsddmp Ae Ied Other configurations (frame height, arm lengths, arm types etc.) selectable! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 4.16m height, 1.20m arms, 750kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 2.300 (net)! Bedpfjddmp Uex Ag Ield Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Frame: IPE 160 Shelf uprights on one side approx. 4160 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750 kg per arm / 2250 kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Bodpfx Agjddmqyj Iold Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are the prices as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of steel raw material is tight and currently unpredictable. Therefore, we ask you to inquire the current prices and availabilities! We will be pleased to submit you a current offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price ex location incl. loading! Bledpoddmr Nsfx Ag Ied 1 racking unit with 4 uprights 2.395.-€ (net)! Price transport within D (without islands): 425.-€ (net)! Of course you can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf uprights double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms each 1,20m, 500kg load capacity per arm with bracings approx. 1,30 m Shelf uprights two-sided approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal bracing e = 1300mm, standard is 1,30m. Other standard lengths available from stock: 1m / 1,25m / 1,50m / 1,70m / 1,90m! From the length of 1.50m is a small surcharge to the above price! Special dimensions (a

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Bedpfx Agsurv E Do Isld

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Bljdpfx Aewx H R Tog Isd Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid Bjdpfx Ajflpmdeg Ijld • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Blsdpfxoflprij Ag Isd Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Precision Tool Length Sensor 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Bljdpfx Asi Apfzog Isd Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Bledep Atipepfx Ag Iod Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Bjdpfjuxrtfox Ag Ijld Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Bodpfx Aefdkb Teg Iold Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg Bedemhh Dhopfx Ag Isld - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Bodpsmhh Dzsfx Ag Iold The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth Bjdjmhh Anjpfx Ag Isld 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Blodeguk Dkepfx Ag Isd - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Bedpfjguk Dvsx Ag Ield - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Bljdpfxomhh Dtj Ag Isd The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Bljdpfx Agovmwxxe Isd Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, power: 1.2 kW (1.63 HP), axle configuration: 2 axles, load capacity: 200 kg, lifting height: 2,500 mm, lifting power: 200 kg/m, platform length: 1,500 mm, platform width: 730 mm, overall weight: 500 kg, construction height: 1,590 mm, fuel type: electric, ground clearance: 70 mm, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year: 2019 Operating hours: n/a Working height: 4.5 m Platform height: 2.5 m Platform capacity: 200 kg Platform size (L × W): 1500 × 730 mm (with extension) Rotation: 0° (fixed mast) Drive at height: Yes Power: Electric / Battery (24V DC) Battery condition: Good Tyres: Solid / Non-marking Bedoxcuabopfx Ag Iold Transport width: 750 mm Transport height (folded): 1590 mm Weight: 500 kg CE certification: Yes === HIGHLIGHTS === Fully self-propelled low-level lift with 4.5 m working height Lightweight design suitable for raised access floors (Kingspan Approved) Compact footprint of only 0.75 × 1.22 m Large 1.5 × 0.73 m platform with 0.5 m cantilever extension Automatic pothole protection and tilt alarm Easily transportable with 500 kg tail-lift vehicles === CONDITION === Machine in excellent working condition – fully tested, serviced and ready for use. Equipped with maintenance-free AGM batteries, automatic parking brake and emergency descent system. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €6.250 (EXW / excluding VAT). The Power Tower Nano SP is the ultimate compact self-propelled low-level access platform, designed for quick, safe and efficient access at height. Its lightweight 500 kg design makes it ideal for indoor use and raised access floors. Fully CE-certified and ready for work – combining stability, ease of use and maximum safety in one compact solution. === DELIVERY === Crane loading available on request for smooth dispatch. Flexible shipping options tailored to your destination and preferences. All logistics are handled professionally by the Collé Rental & Sales team.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Bedpfx Asxw Nv Heg Ield Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, overall weight: 1,000 kg, spindle speed (min.): 1,400 rpm, spindle speed (max.): 7,000 rpm, number of spindles: 1, type of input current: three-phase, TECHNICAL DATA & EQUIPMENT: Serial Number: 765 Operating Voltage: 380 V Frequency: 50 Hz Rated Current: 14 A Voltage Range: Geb Azzknsw D T T Sodoka (context unclear; possibly placeholder or specific manufacturer code) Centre Height Universal Dividing Head: 170 mm Centre Height Tailstock: 120 mm Centre Height Tailstock with Intermediate Bearing: 170 mm Max. Workpiece Diameter Between Centers: 338 mm Max. Workpiece Diameter in Cantilever Mounting: 600 mm Max. Distance Between Centers: 950 mm Internal Taper Dividing Head Spindle: Morse Taper 4 (MT 4) T-slot Size Machine Base: 12 mm T-slot Size Other Parts: 8 mm Movement Range: Grinding Stroke Travel: 190 mm Cross Movement Tool Holder: 100 mm Height Adjustment Grinding Head: 325 mm Grinding Spindle Infeed: 5 mm Coarse Adjustment Travel Tool Holder: 230 mm Grinding Head Slide: 800 mm Universal Dividing Head on Tool Slide: 330 mm Swivel Range Grinding Head Slide: 360° Grinding Head: 360°, Tool Holder: 360° Universal Dividing Head Horizontal and Vertical: 360° Maximum Grinding Length for Helical Grinding: 190 mm Max. Rotation of Dividing Head Spindle for Helical Grinding: 1.5 revolutions Max. Grinding Wheel Diameter: 125 mm Max. Cut-Off Wheel Diameter: 200 mm Spindle Speed: 1,400 – 7,000 rpm The machine is equipped with a two-axis optical measuring system, dressing device, table extension with tailstock, and matching accessories. Contents include tool holders, clamping equipment, a helical grinding device, radius grinding device, a tool post, and various accessories. NOTES ON COLLECTION: Loaded onto truck, forklift available. Available immediately. Bledpfx Ajw Nn Akjg Ied

Condition: used, functionality: fully functional, load capacity per storage section: 14,000 kg, total width: 1,050 mm, load per truss pair (max.): 3,500 kg, frame height: 10,500 mm, clear span: 2,700 mm, Rafdella Pallet Racking 10500x1050x120mm (USED) · 37 x upright Rafdella, blue, 3900x1050x120mm (approx. 14,000 kg) Sales price: €95.00 each excl. VAT · 198 x upright Rafdella, blue, 10500x1050x120mm (approx. 14,000 kg) Sales price: €210.00 each excl. VAT Bljdpfowhltrjx Ag Isd · 1465 x beam Rafdella, 2700x140x50mm, orange (load capacity approx. 3,500 kg) Sales price: €20.00 each excl. VAT For larger quantities, prices are available upon request! Call or email to inquire about availability and pricing. All prices exclude VAT Payment: Due upon delivery Ex stock Zutphen. Assembly/transport can be arranged if required. Inspection available at additional cost! Used items while stocks last. Bastell Warehouse Equipment BV Gerritsenweg 6 7202 BP Zutphen Specialist in: Pallet Racking Storage for Euro and block pallets up to 1,500 kg per pallet. Drive-In Racking Maximize use of your space when storing large quantities of the same SKU. Shelving Systems Ideal storage for light goods up to 250 kg per level. Also suitable for multi-tier shelving construction. Wide Span Shelving Storage for medium-weight goods up to 600 kg per level. Cantilever Racking For timber boards, pipes, etc.—ideal for unrestricted loading access. Flow Racking FIFO (First In, First Out) system, maximizes available space utilization. Mezzanine Floors Double your warehouse floor space! Multi-tier mezzanines available. Keywords: pallet racking - warehouse racking - warehouse equipment - warehouse - pallet - rack - Euro pallet - block pallet - euro - block - chep - dpb - rack - pallet racking - warehouse - warehouse racking - warehouse racks - racks - warehouse equipment - warehouse solutions - used - second-hand - cantilever racking - cantilever - shelving - shelf units - wide span shelving - wide span - tyre racking - used wide span shelving - new warehouse racking - used warehouse equipment - archive shelving - office furnishing - tyre racks - drive-in racking - mezzanine - mezzanine floors - nedcon - PR - NR - overtoom - feralco - vogelsang - vogelzang redirack - ramada - EAB - hovuma - jungheinrich - mecalux

Condition: used, TECHNICAL DATA • Length of sheets: 2,400 mm or 4,000 mm • Width of sheets: 150 mm • Material thickness: 1.5 mm • Load capacity: 500 kg/m² • Condition: used Available quantity: approx. 3,000 m² PRICES: • per m²: €15.00 net Available ex-stock Nordhorn. Optional accessories • Guardrail • Staircase • Transfer station Blsdpevdqi Sjfx Ag Isd • Collision protection YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. Additional costs depend on the place of delivery and the size of the consignment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the case of an order. The price is quoted per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and the skilled trades. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm Bljdpfofgyg Dsx Ag Ied dimensions 3,8 x 0,9(1,35) x 2,45 m