Used Carbide Inserts for sale (2,368)

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Gedpfxsvkd Ins Ad Djui Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Circulation O over bed: 435 mm O rotation over cross slide: 200 mm Center height: 210 mm Speed range: 1 - 3500 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool drive C axis via main drive 3 jaw chucks Schunk ROTA plus 0 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable drilling quill Coolant device reinforced 5.5 bar Coolant spray gun Chip collection tray 5 pcs. Height-adjustable machine shoes Operating instructions

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. BOEHRINGER precision lathe model DUE 800 Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. Torque: 6300 Nm Guodport T S Rsfx Ad Doi 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Condition: used, empty load weight: 7,180 kg, maximum load weight: 22,820 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 07/2026, loading space length: 9,000 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, insertable stakes, -- printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Gusdpfxoxu Eapo Ad Dji

Condition: used, L + Z Lathe WEILER Type Condor 81 A Machine no. No. 36553 Year of construction approx. 1985 center distance 750 mm Turning diameter over bed 330 mm Center height over bed 165 mm Turning diameter over support 180 mm Center height above support 90 mm Spindle bore 40 mm Chuck holder short taper DIN 55027 size 5 Tailstock inner taper MK 3 Pinol adjustment 110 mm Spindle speed 45 - 2800 rpm 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear steps Gedpfx Aek S Ht Asd Deui - 3-jaw lathe chuck Ø 160 mm RÖHM with with drilling and turning jaws - Multifix size B quick-change steel holder with 3 inserts - Automatic longitudinal and planar feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 piece rotating center point - Electrical diagram and operating instructions Space requirement L x W x H 1850 x 950 x 1400 mm weight 1100 kg good condition

Condition: used, mileage: 894,616 km, power: 300 kW (407.89 HP), first registration: 03/2009, fuel type: diesel, number of seats: 61, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater, +++Fixed Price+++ General Engine: DAF Emission Standard: EURO5 Total seats: 61 Seating: 59+1+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Xenon headlights * Reversing camera Passenger Compartment * Auxiliary heater * Air conditioning * Curtains * Luggage racks * Luggage nets * Overhead air vents * Reading lights * Double glazing * Footrests * Refrigerator * Center toilet * Leather headrest inserts * Driver’s microphone Audio, Communication, Electronics * Radio, CD * Video, DVD Exterior * Lift/lowering system * Power steering * Digital tachograph card * Sun visor * Sleeper cabin * Electrically adjustable exterior mirrors * Central locking * Roof hatches * Roof fans Gedoxu Sw Iopfx Ad Djui * Roof ventilator Miscellaneous * Twin tyres * Vehicle length: 13.08 m * Vehicle width: 2.55 m * Vehicle height: 3.61 m * Tyre tread: Front approx. 80% * Tyre tread: Rear approx. 40% Our internal vehicle number: 11853 Errors excepted. Images and text may vary from the actual vehicle. Always over 300 vehicles in stock.

Condition: ready for operation (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Guodpfxsdwh U Ao Ad Dsi

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Gedjw Ew D Dopfx Ad Dsui Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Gusdpfjh Hvk Ajx Ad Dji Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, mileage: 576,220 km, power: 300 kW (407.89 HP), first registration: 04/2010, fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, General Engine: DAF Emission standard: EURO5 Total seats: 55 Seats: 53+1+1 sleeping seats with lap belts Transmission: Automatic Safety Features * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Xenon headlights * Reversing camera Passenger Compartment * Auxiliary heater * Air conditioning * Tables * Curtains * Overhead luggage racks * Luggage nets * Directional air vents * Reading lights Guodpfxoxu Sw Ue Ad Dji * Double glazing * Footrests * Kitchenette * Refrigerator * Central WC * Headrests with leather inserts * Driver's microphone Audio, Communication, Electronics * Radio, CD * Video, DVD Exterior * Lifting/lowering system * Power steering * Tachograph (card) * Sun visor * Sleeper compartment * Electrically adjustable exterior mirrors * Central locking * Roof hatches * Roof fans * Roof ventilator Miscellaneous * Twin tyres * Vehicle length: 13.08 m * Vehicle width: 2.55 m * Vehicle height: 3.61 m * Tyre condition (front axle): approx. 30 % * Tyre condition (rear axle): approx. 60 % Our internal vehicle number: 11857 Errors excepted. Images and text may differ from the actual vehicle. Constant stock of over 300 vehicles available.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Gedpfxjd Etado Ad Djui Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. Gusdpfsd Etagsx Ad Dsi A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2005, condition: reconditioned (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter. Gusdpfxed A Ud Uo Ad Dsi

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Gedpod Nkpysfx Ad Djui This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Gujdpfxod Ddkbo Ad Dji

Condition: not inspected (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Guodpeff Hdzofx Ad Dsi

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. Gusdpefnldqefx Ad Dei LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Year of construction: 2007, condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Gujdod Nkp Aepfx Ad Dsi This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Year of construction: 2007, condition: reconditioned (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM (W+D) inserter envelope inserting machine. Gedpfx Adof A Nr Do Djui

Condition: refurbished (used), Year of construction: 2007, We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB300 - 10K Guedjk D Hczspfx Ad Dsi 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also availabl optional. Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Condition: used, Year of construction: 2011, functionality: fully functional, We have here a Plockmatic DMI4000 envelope inserter module available. Year 2011 and counter is just 311.014 We do not have possible extra modules, like collating tower etc, which can be installed at this inserter module. Guodjwzam Tepfx Ad Dei

Condition: refurbished (used), Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour Gsdpfov Ebx Hjx Ad Djui

Condition: refurbished (used), Would you like or need to enhance your current Buhrs ITM envelope inserting system? That is possible, we have all the possible original modules to do so! We have all the original modules available which can be installed at the beginning, on top of the maschine base, or at the end of your Buhrs ITM (W+D) envelope inserter can be installed. Possible modules: - Mueller Apparatebau single sheet feeder transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) Gujdpfjt Akt Djx Ad Dsi - Mueller Apparatebau paper cutting sytems for continues paper to single sheets A4 documents transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Buhrs ITM turning belt modules - Buhrs ITM Alignment modules - Buhrs ITM Mailtable module - Buhrs ITM feeders like - rotary - friction and shuttle feeders To enhance and or upgrade your current Buhrs ITM BB300, BB600 or BB700 machine? Yes it is possible!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2012 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2012 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Guedswml S Espfx Ad Dei Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2013, condition: reconditioned (used), We have a KAS C4 compact envelope inserting system, year 2013, available.The total counter is just 629.426 envelopes in its lifetime!!! This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Configuration: - Single sheet feeder - Folding feeder in-line - 2 insert feeders (bottom feed) - Envelope section Guodjkvpbpepfx Ad Dji - Conveyor belt We sell this machine after complete maintenance

Condition: refurbished (used), Year of construction: 2008, We have a as new KAS 465 HS envelope inserting machine available, with optional Mueller transactional channel/feeder for feeding/collating/folding a4 documents with reading or counter. 3 Insert feeders (friction). This KAS 465 HS envelope inserter, year 2008. This machine was bought new by the same customer where the machine was at up to the last minute. This machine was a back-up system for mostly c4 production so therefore not used that often. We did completely maintain this machine and changed all parts which needed to be replaced. Configuration: Optional - mueller apparatebau 6809c transactional channel with autoloader - 3 insert feeders (bottom fed, friction) - Envelope inserting section KAS 465HS - Closing section - Conveyor Godpfx Aei A Ixbod Deui This machine is now available for a demo