Used Carbide Inserts for sale (2,286)

Condition: used, Bündelpresse / Bundle Press BMF SK 82 B Baujahr / Year 1968 - Serial-No. 0210 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Chsdpfx Aajxp H Tyeqed

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Chsdpfow I Uxpsx Aaqsd Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - SK50 tool taper - Through hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input increment 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct position measurement with resolution 0.0001 mm Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Workpiece weight max. 2.5 kg Chain magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Workpiece weight max. 1.5 kg Stack magazine: - Suitable for stack magazine for indexable inserts CCD area camera measuring system: - Tool indexing and positioning by cooling channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Touching off workpiece length / tool tip - Scanning flute lead angle - Positioning in a coolant hole at the tool tip Electrical connection: - 63A pre-fuse - Supply voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft and Bauer extinguishing system - Extraction: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Workpiece retainer ----- Operating procedure for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feeding by automatic handling system - Workpiece clamping by automatic collet chuck - Positioning of workpieces in the working area - Workpiece machining - Automatic return of the workpieces on a driven discharge conveyor Operating procedure for solid carbide indexable inserts: - Manual loading of the stack magazine in the working area - Workpiece feeding by automatic handling system - Automatic clamping using special clamping device Chedewpqkropfx Aaqod - Positioning of workpieces in the working area - Workpiece machining - Automatic return of finished workpieces to the storage system Drill grinding: - Grinding flute profile - Grinding point - Grinding outer contour - Grinding relief - Grinding circumferential margin - Cylindrical grinding Indexable insert grinding: - Grinding seating surface and pin ----- There are two additional identical machines for sale!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Chsdpfetxlxujx Aaqod Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: good (used), fired steel holder insert fab. tripan, type 431 Chedsgwt Ucspfx Aaqjd Please ask for the respective quantity individually.

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Chodpfevvi Spsx Aaqjd Storage location: Nattheim

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Chsdpoxqypdefx Aaqjd Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Chjdoqbr Suopfx Aaqod Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: ready for operation (used), Year of construction: 2006, Two inserting machines are available. 1) Grützmacher Rubin C5, max. mechanical output: 7500pieces/h, envelope format range: C6-C5, min. insert size: 99mm/148mm, max. insert size: 148mm/210mm, max. filling thickness: 5mm. 2) Bell and Howell CEXP-6RC, year of manufacture: 2006, max. mechanical output: approx. 10000cycles/h, envelope format range: C6-C5, max. insert dimensions X/Y: 110mm/220mm. Machine dimensions X/Y/Z: approx. 2200mm/950mm/1250mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Chodext Rmxjpfx Aaqsd

Condition: used, Year of construction: 2003, Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph The Used Isobaric Filling Monoblock Alfatek TBV 24/32/4 ISO up to 4500 bph is a high-precision bottling machine designed for the controlled rinsing, filling, and capping of still and sparkling wines. Configured with a 24-station rinser, 32 isobaric filling valves, and 4 capping heads, it offers a balanced combination of speed, product care, and operational flexibility. The machine is engineered to perform at a nominal capacity of approximately 4,500 bottles per hour for still wine and around 4,000 bottles per hour for sparkling wine, thanks to its dual filling modes: gravity filling for still products and traditional isobaric filling for carbonated products. Csdpfexqmutsx Aaqjhd Constructed from stainless steel throughout, the monoblock provides excellent durability and hygiene. All product contact parts are made from food-grade stainless steel AISI 316L, ensuring resistance to corrosion and maintaining wine purity during processing. Transparent polycarbonate guarding surrounds the working area, allowing visual inspection while providing full operator safety. Each access panel is fitted with interlocked safety switches to meet industry safety standards. The layout of the monoblock is compact yet service-friendly, with easy access to all mechanical and pneumatic components. The integration of the three main functions—rinsing, filling, and capping—into one frame reduces transfer points, limits bottle handling stress, and optimises space usage within the bottling line. Rinsing, Filling, and Capping Operations The rinser section features 24 grippers mounted on a rotating carousel. Bottles are inverted and subjected to a dual-treatment rinse cycle: an initial rinse with water or sanitising solution, followed by an air blow using sterile or filtered air to remove any residual liquid and particles. The grippers are designed for precise neck handling, ensuring secure positioning of bottles throughout the rinse cycle, regardless of format. The filling section uses 32 traditional mechanical isobaric valves with pneumatic actuation. This system is known for its robustness, easy maintenance, and accurate fill level control. The filling process can be operated in gravity mode for still wine, providing faster throughput, or in isobaric mode for sparkling wine, preserving carbonation levels and minimising oxygen pickup. Each valve is equipped with a vent tube for precise level setting and a pre-evacuation stage to reduce dissolved oxygen, improving product shelf life and stability. The capping turret has four heads, capable of applying both cylindrical corks and BVS screw caps. The changeover between closure types is supported by adjustable head assemblies and interchangeable tooling, allowing the machine to handle a wide range of premium wine formats without extensive downtime. The capping process is synchronised with bottle infeed and outfeed to ensure accurate closure placement and torque or insertion depth control, depending on the closure type.

Condition: good (used), Technical data: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter over support 135 / 270 mm Cedoqff D Ijpfx Aaqjhd - Center distance 1000 mm - Spindle bore 52 mm - Taper of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - feeds longitudinal + plane - metric thread / Withworth thread / modular thread / DP thread - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center point, new Multifix size B with 3 inserts

Condition: used, Year of construction: 2021, Oil application machine LW100.6/300 Two-roller machine - Roller width: 300 mm Material throughput up to 80 mm Oil application from above and below Adjustable throughput speed approx. 6 - 35 m/min Motor 0.37 kW, 400 volts, 50 Hz. CE certified Machine table working height 900 mm, powder-coated Additional protective hood with adjustable throughput thickness, with Plexiglas insert Non-driven roller conveyor 1300 mm Working height 900 mm Height adjustable Storage location: Supplier Cedpfewbk R Aex Aaqshd

Condition: used, Year of construction: 2015, Bielomatik/PolyMerge/Kuka Tank Assembly Line for cutting, welding, punching and inserting and adding of components Composed of : Chjdpoxpw Nfsfx Aaqjd (6x) Kuka KR 210 R2700 extra Industrial Robot (2x) Kuka KR 210 R3100 ultra Industrial Robot various vibratory feeders Condition: Good

Condition: new, Machine in stock and immediately available Horizontal Mitre Bandsaw S 225 G Cutting capacity at 90°, round: 225 mm Cutting capacity at 90°, square: 200 x 200 mm Cutting capacity at 45°, round: 160 mm Cutting capacity at 45°, square: 160 x 160 mm Cutting capacity at 60°, round: 100 mm Cutting capacity at 60°, square: 100 x 100 mm Saw blade: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Motor power: 1.5 kW Voltage: 400 V Features: - Saw bow swivels up to 60° - Two blade speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid material made of stainless steel, iron, etc. - Generously dimensioned saw arm for low-vibration operation Chedpod R Skljfx Aaqsd - Saw arm lowering via hydraulic cylinder - Quiet operation due to robust construction - Automatic shut-off after cut completion via micro switch - Quick-action vice for simple and fast workpiece clamping - Precision, adjustable saw band guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade 2480 x 27 x 0.9 mm, 6/10 TPI - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Band tension manometer - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end-stop - Base frame

Condition: good (used), Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 785 x 385 mm -Total height: 20 mm Chsdorri Ttjpfx Aaqod -Struts: wall thickness 2 mm -Bridge height: 20/12 mm -Gratings: Hot-dip galvanized -Quantity: 4x grids available -Price per piece -Weight: 6 kg/piece

Condition: used, Year of construction: 2000, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Csdexqmrfjpfx Aaqjhd Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: good (used), Year of construction: 2010, Technical data: Maximum diameter: 280 mm Maximum rectangular dimensions: 300×280 mm Maximum bundle dimensions: 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of operation, these machines are standard-equipped with a 2-meter roller table, a chip conveyor, variable clamping force adjustment, a double retractable index vise, a work light, and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm notifications Infinitely variable blade speed, controlled by an inverter Chedpfx Aaewvu U Ueqsd Flywheel motion detector with blade jam and band breakage switch Automatic shuttle-type feed and movable roller table Hydraulic blade tensioning Two-stage rapid lift clamping devices Split front vise Double retractable index vise Work height sensor and quick-approach function Carbide guides with roller bearings Nesting device and vertical rollers for bundle cutting Length adjustment: magnetic scale 20 preset work programs Automatic chip conveyor Motorized band brush (Roller conveyor available as an option upon request)

Condition: used, Year of construction: 1985, Table length: 2500 mm Spindle travel: 120 mm Table width: 760 mm Csdpfx Aaow Aihpoqohd Design: Tilting Tilt angle forward: +45° Tilt angle backward: -5° Speed selection: Belt change and pole switching Spindle taper: MK 5 Column material: Cast iron Control panel position: Top Spindle height adjustment: Handwheel and electric Spindle tilt adjustment: Handwheel with dial gauge Spindle lock: Manual Spindle brakes: Electric Spindle rotation direction: Left/right Motor power: 4.7 / 5.7 kW Table opening closure: Insert segment Fence jaws version: Aigner jaws Fence adjustment: Manual Fence display: Scale Cutter jaw adjustment: Manual Power feed unit: Yes, 4 rollers, Haffner Feed adjustment: Fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Year of construction: 2024, condition: like new (used), Brand new, compact, and handy battery-powered airless sprayer for painting, spraying eaves, etc. Comes with 10 filter inserts for the spray gun. Includes 2 batteries and a charger. Can be operated as a backpack unit or simply placed on the ground. Chjdpfx Ajxuabboaqjd

Condition: new, Robust double mitre metal bandsaw for professional use in metalworking and container fabrication, featuring hydraulic lowering of the saw bow. Chsdpfxow Hxaps Aaqsd Technical Data: Cutting capacity: 0° round: 315 mm 0° square: 270 mm 0° rectangular: 250 x 400 mm 45° round: 280 mm 45° square: 280 mm 45° rectangular: 300 x 280 mm 60° round: 180 mm 60° square: 140 mm 60° rectangular: 140 x 180 mm -45° round: 250 mm -45° square: 220 mm -45° rectangular: 280 x 200 mm Cutting speed: 35 / 70 m/min Saw blade: 3460 x 34 x 1.1 mm Worktable height: 970 mm Motor power: 2.2 kW Coolant pump motor: 100 W Dimensions (approx.): 2270 x 970 x 1140 mm Weight (approx.): 580 kg Features: - Double mitre saw with tiltable saw bow, adjustable from left -45° to right -45° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc., in industrial applications - Generously dimensioned cast saw arm for low-vibration operation - Equipped with two cutting speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bimetal saw blade 3460 x 34 x 1.1 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Cedjxpi Eljpfx Aaqohd Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Format: 320 x 480 mm Equipment: Equipment Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Chodjwcqygjpfx Aaqod Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Condition: new, Robust double-mitre band saw for professional use in metalworking and tank construction, featuring hydraulic lowering of the saw bow. Cutting capacity: - Round 0°: 355 mm - Square 0°: 300 x 300 mm - Flat 0°: 490 x 300 mm - Round 45°: 350 mm - Square 45°: 290 x 290 mm - Flat 45°: 340 x 290 mm - Round 60°: 230 mm - Square 60°: 180 x 180 mm - Flat 60°: 220 x 180 mm Blade speed: 35 / 70 m/min Saw blade: 3770 x 34 x 1.1 mm Working height approx.: 870 mm Coolant pump: 100 W Motor power: 1.9 kW Connection: 400 V Dimensions (LxWxH) approx.: 2200 x 1400 x 1500 mm Weight approx.: 625 kg Features: - Double-mitre saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, structural and solid materials such as stainless steel, steel, etc., in industrial environments - Generously dimensioned cast saw arm for low-vibration operation - Two band speeds to optimally adapt to the workpiece - Hydraulic lowering cylinder - Automatic vice release after cutting - Quick-release vice for fast and easy clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC certified, German documentation and support Chedpfsw Hxcksx Aaqed Scope of delivery: - Bi-metal saw blade 3770 x 34 x 1.1 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after end of cut - Base frame

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications Cjdpfsd R Sipjx Aaqehd - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut Csdpfx Aeiqt Rlsaqjhd - Underframe