Used Celtic 12 for sale (20,632)

Condition: ready for operation (used), Indramat DDS02.1-W150-D controller, serial number: 263504-50379, professionally overhauled and tested, complete with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Rodpfsy U Tm Hex Ankocb

Condition: used, Rondslijper centre height 125 mm centre width 650 mm grinding diameter 250 mm grinding wheel diameter 400 mm total power requirement 8 kw weight approx. 2500 kg Dit is een machine van Machines4you Rcodpfxegfqn Ns Ankjb

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Rcodjzak Htjpfx Anksb

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options Rsdpjxq Ttiefx Ankecb DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), 3 kW 1.500 UpM 8,7 - 52 UpM 444-800 Nm Rcjdpfx Anoylcn Tskjb

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 18,542 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork carriage width: 2,500 mm, fork length: 2,000 mm, empty load weight: 18,160 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 1200 mm Fork width: 220 mm Fork thickness: 90 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 11.00-20 Rear tire type: Pneumatic Rear tire size: 11.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used machine directly, even without you buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCG100-12. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We can also sell your vehicle on consignment at our facility. Sideshift, fork positioner, Rodpfxey E Uv De Ankocb Heater, full cab,

Condition: repair required (used), Year of construction: 1963, LZ lathe Rcjdpsibdz Ijfx Ankeb Fabr.Harrison Type:L 12 Bj.1963 Machine has clutch defect. Chuck Dm.160 mm Tool holder Multifix B turning diameter : 213 mm Center length : 610 mm spindle bore : 32 mm spindle speeds : 34-2000rpm Machine documentation available.

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Rjdpsyyqm Iefx Ankocb Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Rcodpfx Aezaa Umsnkjb Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 Rcedpfxey U Hize Ankjb MAIN SPINDLE - Maximum bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm Rodpfey U Hiuex Ankscb - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar loading magazine High pressure unit 40 bar The machine can be inspected under power by appointment. All technical details and information are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2000, operating hours: 42,000 h, machine/vehicle number: IntNr231370, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 FANUC 18i-T CNC control Operating hours: 42,000 Technical Data: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 Rjdpfey U Hinex Ankecb FMB Minimag bar loading magazine The machine can be inspected under power by appointment. Subject to technical modifications, errors, and prior sale!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Rcedpfx Anoy U Hh Dsksb Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Rjdpfx Anovvi Htekocb Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, functionality: fully functional, machine/vehicle number: A20300086, Year of construction: 2010, operating hours: 17,850 h, load capacity: 33,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,000 mm, power: 181 kW (246.09 HP), fork length: 2,500 mm, empty load weight: 45,680 kg, drive type: Diesel, Heavy-duty forklift – Diesel Chassis number: A20300086 Load center: 1200 Mast type: Standard Condition: Refurbished, no warranty Technical condition: good Front tire type: Pneumatic Front tire size: 16.00-25 Front tire condition: 80 - 100% Rodpfxjy T S Tis Ankecb Rear tire type: Pneumatic Rear tire size: 16.00-25 Rear tire condition: 80 - 100% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even without you purchasing a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Side shifter, 360° rotating device = 360° turnable forks, quick change fork system = quick change system, camera, central lubrication system 3rd valve, 4th valve

Condition: used, functionality: fully functional, machine/vehicle number: B20700136, Year of construction: 2019, operating hours: 17,060 h, load capacity: 33,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,000 mm, power: 185 kW (251.53 HP), fork length: 2,500 mm, empty load weight: 45,680 kg, drive type: Diesel, Heavy-duty forklift - Diesel Chassis number: B20700136 Load center: 1200 Mast type: Standard Transmission: Dana TE17000 Condition: Refurbished, no warranty Technical condition: good Front tire type: Pneumatic Front tire size: 16.00-25 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 16.00-25 Rear tire condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair conditions are always possible for us. We would also be happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will gladly provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop specializes in the repair and maintenance of large equipment from 8 tons upwards. We will also gladly display your vehicle for consignment sales. Side shifter, 360° rotator = 360° turntable forks, Quick change system, Camera, Central lubrication system Rsdpoy T S Tcjfx Ankocb 3rd valve, 4th valve.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 06/2028, total length: 700 mm, total width: 505 mm, total height: 870 mm, input frequency: 50 Hz, type of input current: AC, power: 1.3 kW (1.77 HP), electrical fuse: 10 A, spiral kneader Model: ECO 12 Rcjdpfx Anemfnuiokeb Kneading machine with mature and robust technology! LED control Dough machine with 2 timers 2 gears in 10 steps for min/max 1.5 to 12 kg of dough flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 220V, 1.3 kW, Schuko plug Dimensions: 505 x 700 x 870 mm, WxDxH NEW machine With 24 months warranty Visit our large bakery machine park!

Condition: ready for operation (used), Baumüller BUS21-15/30-30-001, fully refurbished and tested by qualified personnel, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 89312467. Redpfx Ajy T Utxjnkocb

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 11,647 h, load capacity: 5,000 kg, lifting height: 4,480 mm, free lift: 2,100 mm, fuel type: diesel, mast type: duplex, construction height: 3,030 mm, fork carriage width: 1,270 mm, fork length: 1,200 mm, empty load weight: 7,820 kg, total length: 4,340 mm, drive type: Diesel, construction width: 2,050 mm, Side loader Load center: 600 mm Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQN50/12/45V. Rcjdpfx Anjxirqdskob P.S.: Our master workshop specializes in repairs, maintenance, overhauls, and custom modifications for forklifts from 8 tons and up. We are also pleased to offer your vehicle for commission sale in our facility. Fork positioner, Heater, fully enclosed cabin, full free lift, Platform height: 860 mm

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm Redpfx Ansvxf Irokocb control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Year of construction: 2016, condition: used, Technical details: wheel base: 950 mm lifting capacity: 25000 kg Lifting height: 1310 mm Tare weight: 2100 kg dimensions LxWxH: 1,7 x 2,0 x 0,75 m total power requirement: 11,2 kW Rsdpfx Ajx Ac R Ujnkjcb WHEELSET CHANGING SYSTEM - WHEELSET SWIVEL Application: Changing wheelsets and driving sets for railroad applications (locomotives, freight wagons, etc.) 2 speed levels forward/backward 2 speed levels lifting approx. 60 sec./lowering approx. 110 sec., operation via manual control unit shift left/right +/-20 mm Lift category 5 EMERGENCY OFF Platform: L: 1420 x W: 657 mm, effective stroke 1050 mmOperating pressure for hydraulics = 185 bar Speed of chassis = 2 stages min. 18 mm/sec. Center distance: 950 mm Equipment: 10 m connection cable with 380 V *

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration Rcedpfx Asw Ag Ndenkjb The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm Rcjdpfx Aey Tt Twjnkob -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm Rcedpjy Tt Sgjfx Ankeb -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: used, functionality: fully functional, machine/vehicle number: T331051593, Year of construction: 2006, operating hours: 5,323 h, load capacity: 16,000 kg, lifting height: 3,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,920 mm, power: 147 kW (199.86 HP), fork carriage width: 2,950 mm, fork length: 2,400 mm, empty load weight: 24,300 kg, drive type: Diesel, construction width: 2,950 mm, Heavy-duty forklift - diesel Chassis number: T331051593 Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Rcjdeyy Effjpfx Ankeb ISO class: Terminal West Mast type: Standard Transmission: Dana Clark 342TE13310-20 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 12.00-20 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 12.00-20 Rear tires condition: 20 - 40% Description: Overhauled transmission with warranty (repaired for €17,000.00) 2,950 mm wide fork carriage Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, fully enclosed cab,