Used Centerless Cylindrical Grinding Machine for sale (65,155)

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. • Demonstration under power and test run possible at any time. Dksdpsxxy A Tefx Ak Aow Availability: Available for immediate delivery!

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, grinding wheel diameter: 600 mm, total width: 2,500 mm, total length: 5,600 mm, total height: 2,300 mm, grinding diameter: 500 mm, type of input current: three-phase, grinding wheel width: 125 mm, feed length X-axis: 430 mm, feed length Z-axis: 1,500 mm, grinding spindle motor power: 20,000 W, overall weight: 7,400 kg, pivoting range: 225 °, input frequency: 50 Hz, controller manufacturer: Sinumerik 840D sl, drive type: Siemens Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Schaudt precision for shafts up to 1500 mm in length and 500 mm in diameter – completely overhauled and modernized by Serwema Retrofit Solutions, Chemnitz. The PF5 is one of the most reliable external cylindrical grinding machines in its class: rigid bed, 20 kW grinding spindle, 600 kg between centers. Serwema completely rebuilds it, with a Siemens Sinumerik 840D sl, Sinamics S120, direct measuring systems in X and Z, and an automatic B-axis that swivels the grinding spindle from -45° to +225°: longitudinal, face, and taper grinding, shoulder grinding, and with an optional internal grinding spindle, also boring – in a single setup, without manual retooling. Proven Schaudt mechanics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, inspected in Chemnitz together with you. The user-friendly interface guides the operator through work piece, wheel, and cycle data screens without the need for programming. Marposs balancing and dressing systems reduce non-productive time and protect the grinding wheel; grinding wheels up to 600 mm in diameter and 125 mm in width with a peripheral speed of 50 m/s allow for high material removal rates during rough grinding and the finest surface finishes during finishing. Application areas: shafts, spindles, rollers, hydraulic pistons, and gear components in mechanical engineering, drive technology, the printing and paper industry, and contract grinding shops. Technical data: max. grinding length 1500 mm, max. grinding diameter 500 mm, work piece weight between centers 600 kg, max. grinding wheel Ø 600 mm, max. wheel width 125 mm, peripheral speed 50 m/s, grinding spindle power 20 kW, X-axis travel 430 mm, B-axis swivel range -45° to +225°. Dimensions approx. 5.6 x 2.5 x 2.3 m, weight approx. 7.4 t. Scope of supply: new Siemens Sinumerik 840D sl control with Sinamics S120, air-conditioned switch cabinet manufactured in-house, direct measuring systems for X and Z, user-friendly interface, automatic B-axis, balancing and dressing (Marposs), machine enclosure with state-of-the-art safety technology, lubrication and hydraulic unit, new paint finish RAL 5015/7035, geometry inspection according to manufacturer's standard with protocol, operating manual. Options: internal grinding spindle, paper band filter with or without magnetic separator (Polo or Filtec), installation and commissioning, operator training. Dedpsz E H Itsfx Ak Askw

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Dodpfx Aozh Uwqsk Askw Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: good (used), Hydraulic cylindrical grinding machine Center height 100 mm Center width 500 mm Grinding wheel diameter min./max. 200 - 300 mm 3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm Workpiece spindle head: 8 workpiece speeds, adjustable 30 - 750 rpm. Spindle taper or inner taper of the workpiece spindle MK 4 Tailstock: Inner taper of quill MK 3 Quill travel 30 mm Table: Maximum table inclination +/- 6° Dkedpfx Ajr E Aziek Ajw Table speed, adjustable 0.1 - 6.0 m / min. Motor power 3 kW Dimensions L x W x H 1650 x 1350 x 1400 mm Weight 1900 kg Accessories / Special features: - Manual or automatic operation - Automatic infeed - Grinding wheel flange with grinding wheel - Wet grinding device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2026, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Dsdpfetrf Smjx Ak Aekw Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only Dkedoxmurxspfx Ak Aew - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, JONES AND SHIPMAN EIT 1076 PRODUCTION CYLINDRICAL GRINDING MACHINE MADE IN ENGLAND CAPACITY: 250 x 700.0mm DROP DOWN INTERNAL SPINDLE VARIABLE SPEED HEAD METRIC DIALS UNIVERSAL BED PAPER FILTRATION SYSTEM AUTO CYCLE Dkjdpfezw U Twox Ak Aew

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Dedpfxox Uq T Ds Ak Askw

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Dsdpfx Asiv Au Esk Aokw Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Dkjdpfxeyabt Ds Ak Aew Measuring probe Automatic balancing attachement Wheel dresser Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2001, condition: excellent (used), Cylindrical grinder Grinding width 64 cm Grinding height 10.5 cm Dsdpomicz Tefx Ak Askw Two rollers. 3.7 kW motor

Condition: good (used), machine/vehicle number: 4533, GOZUA RHC 75 CF centerless grinding machine Dkedpfx Aksra A Urj Ajw

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Precision universal cylindrical grinding machine -Max. Shaft diameter: 203 mm -Max. Grinding length: 490 mm -Collet: Ø 32 x 87 mm Dsdpjfig Suefx Ak Aekw -Grinding wheels diameter: 160 mm -Dimensions: 1660/1500/H1500 mm -Weight: 1802 kg

Condition: ready for operation (used), workpiece diameter (max.): 50 mm, Ready-to-use centerless with spare wheels, can be tested on site! Dsdpfxsyvn A Se Ak Askw

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. Dksdpfx Aju Ng Dgek Asw *

Year of construction: 1985, condition: ready for operation (used), Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement. Dksdpsy Ulm Ssfx Ak Ajw

Condition: good (used), Distance between centers: 760 mm Maximum travel on the Z axis: 650 mm Maximum grinding length: 430 mm Maximum grinding diameter: 250 mm Height of centers: 125 mm Maximum grinding wheel diameter: 500 mm Maximum travel on the X axis: 320 mm CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X axis resolution: 0.1 µmm Workhead taper: MORSE 5 Workhead hole diameter: 38 mm Dksdpfxov Tmtlj Ak Aew Tailstock taper: MORSE 4 Workhead rotation speed: 8 to 800 rpm Dimensions (length x width): 2500 x 2000 mm Weight: 4700 kg

Condition: used, Kikinda cylindrical external grinder. Djdpfx As Agvxqek Aekw Grinding wheel diameter: 600 x 80 mm. Working length: 1100 mm and grinding diameter: 320 mm.

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically. Dkjdjz Ek Abjpfx Ak Aow

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. Dksdpfxjuxftro Ak Asw The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: good (used), Machine Data Type: ESO 400 Design: Centerless, with regulating and grinding wheel Overhaul: July 2003 (according to the sign) Truing: For regulating and grinding wheel Workpiece support: Between regulating wheel and grinding wheel Dedpfxe Agpfls Ak Ajkw Extraction: Donaldson Torit DCE extraction system, installed Enclosure: Safety cabin with viewing windows Control cabinet: Separate control cabinet Equipment and scope of supply Donaldson Torit DCE extraction system Separate control cabinet Truing devices for regulating and grinding wheel Accessories as shown in the photos Donaldson Torit DCE extraction system, separate control cabinet, and accessories as shown in the photos. Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of supply agreed upon in the purchase contract shall be binding.

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control Dedpfx Aouxfupok Ajkw

Condition: used, center height: 100 mm, grinding length: 500 mm, Cylindrical grinding machine FORTUNA R 500 for sale. The machine was last operated in 2017 and has been stored in a warehouse since then. Therefore, it is being sold as defective – without warranty. Loading is possible. Dkjdpfx Asxx T Ezok Asw

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Dksdpfxjzrt Ips Ak Aow Machine lighting

Condition: used, Year of construction: 1992, Technical details: Dksdpsy Nk Hysfx Ak Ajw grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm centre distance: 200 mm