Used Chamfer for sale (339)

Condition: excellent (used), Year of construction: 2022, With the RFM 320 model, BARTH offers a sanding machine that enables the quick and efficient creation of chamfers up to 16 mm wide in a single pass, while ensuring the highest sanding quality. Short setup times ensure that even individual pieces can be manufactured in a time-saving manner. The RFM 320 features a sanding belt oscillation system with pneumatic belt cleaning. Standard equipment for the RFM 320: Adjustable sanding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) Chamfer sanding device up to 16 mm wide Sanding belt oscillation with pneumatic belt cleaning Integrated base for feed unit 16A socket for feed Dust extraction port Ø 80 mm Hsdoz Uhgdopfx Afgow Chassis with 2 steerable, lockable wheels Workpiece support, 380 mm extended width Pre-milling unit 1,100 W / 220 V Continuously variable speed up to 25,000 rpm Milling range up to a radius of 12.5 mm CE Installation dimensions L x W x H in mm: 1,600 x 690 x 1,010 Weight: 207 kg Includes many NEW sanding belts Note regarding used machines: • Subject to errors in technical specifications and prior sale. • The stated prices are ex-works prices, collection only – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm Hedpjzvq Eaofx Afgow stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm The machine is in like-new condition Accessories/Features: - ESA S 875 PC control system - 4 height-adjustable support arms in front of the machine - 2 manually adjustable stop fingers - Light barrier in front of the machine - Foot switch - Crowning - Side safety doors - Controlled axes: y1, y2, x, R, z1, z2 - 1 set of upper and lower tools - Machine in like-new condition

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm Hjdpfx Ae Aa A I Sefgow - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Weight 390 kg Hodpfx Aovz Et Hsfgsw Total power requirement 1,5 kw

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Hsdpfx Aozzwhfsfgsw Technical Specification Feed Speed 11 m/min

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Weight 80 kg Total power requirement 0,75 kw Hsdevz Hf Djpfx Afgew

Condition: used, Milling and chamfering unit Hedsbxp Nujpfx Afgjw Manufacturer: IMA - for double-sided edge banding machine (1 unit on the left side / 1 unit on the right side)

Condition: good (used), Year of construction: 2010, pressure 125 t chamfer lenght 3200 mm distance between columns 2700 mm throat 350 mm mould space 395 mm stroke of upper beam 160 mm work height max. 900 mm Hode Aa A Rtopfx Afgew working feed 9 mm/sec return speed 90 mm/sec total power requirement 11 kW weight of the machine ca. 8,6 t dimensions of the machine ca. LBH 3,3 x 1,7 x 2,54 m -Electronic position display -Motorized backgauge -Crowning system -Upper tools as shown -x-bending die -Lazersafe safety system -Foot pedal -Operating manual

Year of construction: 2015, condition: used, End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment. Hsdpfxo Aalprs Afgsw

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Hedpfx Aoz Ea Dzjfgow Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2013, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10,5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 380 Volt total power requirement 30.0 kW weight 21300 kg range L-W-H 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system Hsdpfxoz I Dz Ao Afgow - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. Hedpfx Aot Hwylefgjw * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Hsdpfxjt Hwv Ho Afgow CNC controlled milling machine for synchronous rings

Condition: good (used), Code: 0197 Brand: CASADEI INDUSTRIA Model: K 30/10 HF - CE Standard Automatic edge bander for straight panels, with glue tank for wood, veneer, pvc, melamine, abs and various - CE Standard Technical data Automatic belt conveyor for panel feed - Speed 7 mt/min Panel height mm 10/45 Edge thickness up to 3 mm Gluing unit: Glue tank capacity kg 1,2 - Electronic temperature control Front and rear pneumatic end cutting unit with circular Vidia blades - Micrometric cutting depth adjustment -End cutting speed 9000 rpm - End cutting blade diameter 80 mm Upper and lower end trimming unit - Vidia cutters diameter 80 - Possibility of combined radius/chamfer cutters - End Trimming speed 9000 rpm Total power Kw 2,2 N° 3 suction ports diameter 60 mm Panel support roller conveyor Overall dimensions mm 2150 x 800 x 1200 h Hodps Aggc Dofx Afgjw Weight kg 405

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal Hedpfx Afoz Npz Esgsw - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu Hedezrtpmspfx Afgjw 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz Hjdpferx S Ipsx Afgsw - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars Hedpfx Afezwpwqogew 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation. Hsdpfx Afszrtn Nsgow

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes Hjdpfx Aszu A Rxjfgew * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Weight 680 kg Hjdpsvz E Uqefx Afgsw Total power requirement 12 kw

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade Hodsymyp Rspfx Afgjw - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 1997, pressure 220 t chamfer lenght 4175 mm distance between columns 3760 mm column arm 410 mm dayligth 450 mm stroke 180 mm ajustment speed 100 mm/sec working feed 8.0 mm/sec return speed 75.0 mm/sec table width 180 mm table height 960 mm oil volume 190 l 0 295 bar controlled axis 5 Anzahl Number of working hours ca. 9.400 h total power requirement 15.0 KW weight of the machine ca. 16000 kg. range L-W-H 4810 x 2200 x 2990 mm Very good / well-maintained condition (!!) Only approx. 9.400 operating hours Hodpj Afzu Usfx Afgow - Verified condition - Machine video - ?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA "OPERATEUR" CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) * Pneumatic height adjustment for the backgauge fingers - 4x manually adjustable backgauge fingers - AMADA CNC bed crowning (compensation system) - AMADA upper tool clamping system with wedge-style crowning * Includes 1x set of segmented punch tools (30°) - AMADA 60-series lower tool holder * Includes 1x set of segmented die holders * Includes 1x set of segmented 2-V dies - Lateral safety guards (swiveling doors) - Rear safety guards (swiveling door + protective fencing) - CE-marked - 1x mobile two-hand control unit - 1x mobile foot pedal * Includes a handwheel for fine-tuning the ram penetration depth (Y1+Y2) - Machine documentation

Year of construction: 1970, condition: used, Machine description This used MAPE NL300 pedestal grinder is a heavy duty industrial bench grinder designed for metal sharpening and deburring tasks. Offered for sale by All Metal, this machine is powered by a 1.75 HP three phase motor running at 1,500 RPM on 220 or 380 V power supply. It features two grinding stations with adjustable work rests with angle indicators for accurate workpiece positioning. The unit comes complete with an external dust collector system connected directly to the wheel guards to ensure clean and safe operation. Applications This second-hand grinding machine is suitable for metal fabrication shops, maintenance facilities, toolrooms, and general engineering workshops. It is used for tool sharpening, manual stock removal, edge chamfering, and deburring of metallic parts after cutting. Designed to process steel, cast iron, and various alloys, it fits perfectly into production lines and maintenance departments requiring reliable manual finishing operations. Hsdpfxez H Ubqj Afgow Key features / Advantages The MAPE NL300 double ended grinder stands out for its solid cast iron pedestal construction providing outstanding rigidity and vibration damping. Built by French manufacturer MAPE, renowned for robust machine tools, this equipment guarantees high durability. The integrated dust extraction unit is a major advantage for workspace cleanliness and operator safety. Available at All Metal, specialized in second-hand industrial machinery, this used bench grinder represents a cost effective solution for workshop tool grinding. Diam: 300mm Voltage: 220/380 V HP: 1.75 Extraction: Yes

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Hodpfx Aowazn Asfgjw Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.