Used Clamp Bracket for sale (10,126)

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Fgedpsy Iakfefx Ahnsc Width: 1000 mm Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Fgodstqgnyepfx Ahnec Weight: 1730 kg Good condition.

Condition: used, heavy gate clamping cars make Linck type VA help car vy Fgsdpfx Ahjc Ulvbjnjc

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm Fgedozakf Nopfx Ahnsc -Weight: 5060 kg

Condition: good (used), Year of construction: 2000, Casting top plate make STOLLE Type:ASP 1610 length : 1610 mm width : 250 mm height : 60 mm T-slot for M16 Good condition. Fgjdohcin Hopfx Ahnec

Condition: excellent (used), Year of construction: 2010, CAST MEASURING SPLETTE Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Fgedpfeg Uf Nksx Ahnec Very good condition. Weight.about 16 000 Kg.

Condition: like new (used), Year of construction: 2010, Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010 As good as new with 315mm Röhm chuck bore 100 mm Width : 500mm Depth : 310 mm Height without base plate: 550 mm Height with base plate: 585 mm Base plate : 500 mm X 400mm Center height : Chuck : 325 mm Fgodpfx Ahshcimwenjc is hardly used Very good condition with chuck key .

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm Fodpfxodf U Sye Ahnegc -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Condition: good (used), Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate Fgodpfxjcpklbe Ahnoc -Dimensions: 5545/535/H268 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Fgodpfsru Evgox Ahnjc Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: used, - d1 = 30 mm, - d2 = 27 mm (wrench size), - Total length: 110 mm, - Available: 3 pcs Price per piece: €25.00 + VAT, Fgsdpfx Aelkcg Rehnec

Condition: used, - d1 = 30 mm, Fodpslkcgiefx Ahnogc - d2 = 27 mm (wrench size), - Total length: 215 mm, - Available: 2 pcs. Price per piece: €45.00 + VAT.

Condition: used, - M40 x 1.5, - Right-hand thread, - Available: 5 pcs. Fodpfx Aolkcgbehnjgc Price per unit: €100.00 + VAT.

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Fgedog Uf I Aspfx Ahnoc Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 800 kg, empty load weight: 432 kg, Cardboard clamp Load center: 325 ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: None Technical condition: good Description: Cardboard clamp, side shifter, opening range 490-1,670 mm, arms 650x1,000 mm, FEM 2a UK: Carton Clamp, Side Shifter, Opening Range 490–1,670 mm, Arms 650 x 1,000 mm, FEM 2a Fgsdpfxexbu Euo Ahnsc

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Fjdpfx Ahjzcvcfonegc Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,400 kg, Paper roll clamp Fodpfx Ahey Ih Edensgc Load center: 650 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: Weight: 629 kg, Load capacity: 2400 kg / 650 mm, Roll range: 200 - 1300 mm, Mounting dimension: 228 mm, Suspension: FEM 3A. Good, ready-for-use condition, as returned by the previous owner. Weight: 629 kg, Load capacity: 2400 kg / 650 mm, Roll range: 200 - 1300 mm, Mounting dimension: 228 mm, Suspension: FEM 3A.

Condition: used, functionality: fully functional, Year of construction: 2002, load capacity: 1,800 kg, Port clamp ISO class: ISO class 2 = 1,000 – 2,500 kg Technical condition: normal Description: The unit may be partially repainted, serviced, and UVV-inspected as needed. Prices for these services are available upon request. Fgedpfx Aew Sccwohnjc With integrated sideshift and fork positioner.

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. Fjdjwzkcxepfx Ahnsgc We sell exclusively to countries within the European Community.

Condition: good (used), Code: 0352 Fgjdpfx Aot Eul Aohnoc Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished * Fedpfswb D H Dex Ahnegc

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm Fgjdpfx Ahou N Dr Isnoc *

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Fgedpfx Aeval Nrjhnjc Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm Fgodpfju S Hywex Ahnsc *

Condition: used, Technical details: Fgodpfxsu N Dw Do Ahnec weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *