Used Clamping Angle for sale (13,750)

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of 8 collets including pneumatic clamping system! TECHNICAL DETAILS Cgsdpfx Aboym Sn Se Uor Diameter: 140 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 200 mm Weight: 50 kg External reference: Pieper - Lot 171

Year of construction: 2018, condition: good (used), Fully automatic angle sealer / Fully automatic side sealing machine Manufacturer: Diez Model: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operator side: Left in running direction Passage width: approx. 600 mm Passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / conveyor height in-feed/out-feed: approx. 860 mm +100 Cedpfotzcd Ssx Ab Usgr Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1Ph + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 18326ä

Condition: new, Year of construction: 2018, Automatic angle welder Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm Cgjdpfxjwriuus Ab Uor External dimensions: 170 x 130 x 135 cm 18326ä

Year of construction: 2014, condition: ready for operation (used), A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026. Cgsdpfx Asyu T Eneb Uer

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 575 mm Table width: 510 mm Table height: 1015 mm Cjdpfx Aeylz Edob Uogr

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg Csdpfjgrngdex Ab Uogr

Condition: used, table length 1000 mm table width 1000 mm Cjdpfx Asgrndiob Usgr table load / t weight 1100 kg table height 100 mm

Condition: used, weight . kg taper MK . Thread capacity M24 0 Various lengths The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Cgjdoyukfrjpfx Ab Ujr Your Markus Hirsch Team

Condition: good (used), For sale: small angle line FUNK. Crosscut saw with turret stop, 40 mm grooving spindle with double stroke, 40 mm rebating device with double stroke and large feed unit, glazing bead saw, additionally with IV68 window tooling set. Cedsyuw Tijpfx Ab Uogr

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm Cgodpfsxabfrex Ab Ujr weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: used, Clamping unit for SK 40 tools. The metal tag reads Lorenz Ettlingen 7-191-020-0001 For secure clamping of tool holders with SK40 during tool changes – tool setup E.g. as an accessory for Lorenz gear shaping machine. Cgjdpfxsyuwzme Ab Usr Clamping vise / mounting table / clamping cube. Clamping device for reliable fixation and securing. Price / details upon request All technical data subject to errors/misprints. We sell exclusively to countries within the European Union.

Condition: used, Technical details: width: 1300 mm depth: 1000 mm height: 1600 mm weight of the machine ca.: 1950 / 1860 Stück kg 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Cgodpeu Sq Ubefx Ab Uer Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos Cgjdpfohtn Sfjx Ab Uor -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Condition: used, 3-jaw wedge bar lathe chuck FORKARDT TYPE F+160 Csdof Axprepfx Ab Uogr No. 1659 181 Identical to Forkardt, SMW or Röhm Diameter: 160 mm Inner diameter: 45 mm Chuck flange: Short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard top step jaws for turning 1 set of chuck jaws consisting of base jaws and soft top step jaws for turning - Central adjustment Weight: 11 kg good condition

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm Csdpfx Abjh Uhq Do Uogr - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Csdpfx Asdz Spnsb Uogr Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Own weight: 50 kg sound condition

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition Cgjdpfxjv Ed Svs Ab Ujr

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Codpeinldpefx Ab Uogr Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine Cjdpfx Abjthuzpe Uogr - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Cedpfeh R D Uzex Ab Uogr Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm Cgsdpfx Abjg Uar Do Usr - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine Codpfjwkvi Nex Ab Uegr - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Codsdz Sqxspfx Ab Usgr Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Cgsdjrzfh Hspfx Ab Uer Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar MARCELS MASCHINEN AG Cgjdpfx Ajiz A E Eob Uor