Used Cnc Lathe Control Cycle for sale (50,143)

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Knedpfx Agjxxn U Dezof X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 Knjdpfjxxmiyjx Agzjf spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: Knsdpfxsxd D Rfj Agzof 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: good (used), Year of construction: 2015, turning length: 2,000 mm, Pinacho Smart Turn 285 / cycle lathe, Year of manufacture: 2015, Control: Siemens Sinumerik 828 D, Turning length: 2,000 mm, Swing over bed: 570 mm, Max. spindle speed up to 2,500 rpm, Drive power: 11 kW, Tailstock, Kedpsx A Ea Eefx Agzenf Quill diameter: 95 mm, Quill stroke: 220 mm, 8-position Capto turret, Control with Comfort / Shopturn, Chip conveyor, 3-jaw chuck 250 mm, Coolant system.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 220-15, turning diameter over cross slide: 290 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, quill diameter: 80 mm, quill travel distance: 160 mm, center height: 255 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 2 rpm, spindle speed (max.): 2,800 rpm, feed length Z-axis: 1,500 mm, bed width: 360 mm, total length: 3,330 mm, total width: 1,550 mm, total height: 1,790 mm, mount diameter: 300 mm, type of input current: three-phase, spindle motor power: 15,000 W, travel distance cross slide: 265 mm, overall weight: 3,300 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,800 rpm, three-jaw chuck diameter: 250 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 250 mm, The machine is ready for immediate operation. The axis module and main spindle module were replaced in 01/2024 with completely overhauled modules, and all cables from the bed slide to the operator panel were replaced. The machine guideways are in good condition and fits in the H-5 tolerance range are not an issue. Included accessories: original steady rest, Röm 250 wedge-bar three-jaw chuck, and Multifix tool changer size C. Knedpfx Agsxzzluszof

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Lathe - cycle controled / Brand: SEIGER / Type: SLZ-1200 S x 8000 Year of manufacturing: 08/2000 The machine can be inspected by appointment under power. TECHNICAL DATA: Working area: - Peak width: 8.000 mm - Swing diameter over bed rail: 1.250 mm - Bed width: 900 mm Turning spindle: - Spindle head according to DIN 55027, size 15 - Spindle bore: 240 mm - Chuck diameter: 128 mm Permissible workpiece dimensions/weights: - between the tips without / with one steady rest: 5.000 / 7.000 kg - between the tips with with two steady rests: 8.500 kg EQUIPMENT: - CNC-Control: SINUMERIK 810D ManualTurn - 1 x faceplate, diameter: 1.000 mm - 2 x steady rests - 2 x chip conveyors - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request. Knedpfxexvmyge Agzsf

Condition: used, Year of construction: 2003, Technical details: Ksdpjvb Dt Sjfx Agzenf turning diameter: 630 mm turning length: 2000 mm swing diameter over bed slide: 350 mm upper slide-adjustment: 195 mm bed width: 550 mm spindle diameter in front bearing: 120 mm spindle drive: 17/25 kW spindle bore: 71 mm spindle turning speed range: 3 - 1800 U/min tailstock-quill taper dia./stroke: 110/210 mm total power requirement: 30 kW dimensions of the machine ca.: 4,9 x 2,1 x 2,0 m weight of the machine ca.: 5 t Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor *

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Kodpfx Asx Akm Regzsnf Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard Kodeuzyw Depfx Agzjnf 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Cycle Lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine no.: 684 Control: Weiler (Siemens 810D) Power-on hours: 43,543h (Machine was overhauled by Schmeißer a few years ago) Technical specifications: Knedpewtqnrofx Agzjf Spindle speed: 1–625 / 4–2,500 rpm (2 gear stages) Drive power: 17kW torque Spindle torque: 1,200Nm Spindle bore: 66mm Distance between centers: 1,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Equipment/Accessories: - Interface for external programming - Parat tool holder incl. 6 holders - Operating manual - Coolant system - Various turning tools and drills - Jaws for lathe chuck - Live center - Machine feet The machine has been tested under power and is in perfect, ready-to-use condition. The machine bed is also in good condition. Price: net ex works, loaded on truck from stock.

Condition: good (used), Year of construction: 2004, operating hours: 27,098 h, functionality: fully functional, machine/vehicle number: 01510005551, turning diameter over cross slide: 290 mm, spindle bore: 70 mm, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, total length: 2,800 mm, total width: 1,925 mm, total height: 1,850 mm, overall weight: 2,700 kg, rotational speed (max.): 3,000 rpm, The machine is in good operational condition. The machine can be inspected under power. Kedpfxoxy R Nms Agzsnf Swing diameter over bed/cross slide: 500mm/290mm, cross-slide travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050 rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed rate X/Z: 5m/min, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible.

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: ROMI M680 CNC lathe from 2003, equipped with Fanuc control. The machine comes from an operating workshop and is fully mechanically functional and ready for work. It shows normal signs of use consistent with its age, which do not affect its performance. The Z-axis leadscrew has been replaced, ensuring smooth and precise axis movement. The machine may look “workshop-used” visually, but mechanically it is in very good condition. Complete equipment and tooling as shown in the photos. Technical data: Manufacturer: ROMI Model: M680 Year of manufacture: 2003 Control: Fanuc Swing over bed: approx. 680 mm Maximum turning length: approx. 2000 mm Spindle bore diameter: approx. 105 mm Spindle speed range: up to 1800 rpm Machine weight: approx. 6,300 kg Power supply: 400 V / 50 Hz Technical condition: Fully operational machine – in continuous use, testing on site available. Z-axis leadscrew replaced – smooth, backlash-free movement. Fanuc control fully functional, no errors. Normal signs of use and typical workshop dirt. Mechanically in good condition. Knjdjx Avz Tspfx Agzef Machine ready for immediate operation, technically sound. Robust ROMI construction – excellent stability for heavy-duty machining. Low maintenance costs, readily available spare parts. Fanuc control – intuitive, reliable, and easy to service. Ideal for workshops needing a versatile lathe with a large turning capacity. Feel free to contact me. The machine can be inspected upon prior arrangement. Unloading, loading, and assistance with transport organization are available.

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment Knodpfswwlt Rex Agzof *

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min Knedpfx Agsxygdyszef • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 Knjdpfx Ageucl Alozjf year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 Kedpfx Ajxhqqmogzonf turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe Knodpfow E Nkisx Agzsf -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 Kjdpfx Agjw Syb Djzenf x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min Kodpfewwlvljx Agzsnf feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 250 mm, spindle bore: 58 mm, turning length: 930 mm, turning diameter over bed slide: 460 mm, quill stroke: 127 mm, quill diameter: 68 mm, center height: 230 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, spindle speed (min.): 40 rpm, spindle speed (max.): 3,000 rpm, bed width: 300 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 1,850 kg, torque: 1,012 Nm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, workpiece weight between centers: 350 g, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 460 mm Center distance: 930 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 14/10 kW (AC drive) Max. Torque: 1012 Nm Spindle holder DIN 55029: Camlock D6 Spindle bore: 58 mm Including equipment a.o: - Siemens AC servo motors Kedpou T Ippjfx Agzonf - Siemens supply and amplifier modules - Manual 3-stage gearbox - Multifix B type steel holder head - Processing area covered by 2 sliding doors and additional chuck protection for open operation - Chip tray can be pulled out to the front - Manual tailstock - Rotating center point - Coolant system

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 28958, turning diameter over cross slide: 210 mm, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, rotational speed (max.): 2,300 rpm, controller model: FAGOR 800T, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 210 mm Spindle bore: 52 mm Swing diameter over bed slide: 400 mm Quill diameter: 58 mm Quill travel: 155 mm Center height: 200 mm Bed width: 300 mm Max. spindle speed: 2,300 rpm Center distance: 1,150 mm Knodpfx Aoxp Nnajgzof Swing diameter in gap: 600 mm MACHINE DETAILS Controller model: FAGOR 800T Tailstock quill taper: MK 4 EQUIPMENT Tool cabinet with accessories

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg Kodpou Ix Izsfx Agzonf max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 86 mm, turning length: 1,120 mm, turning diameter over bed slide: 500 mm, quill stroke: 180 mm, quill diameter: 80 mm, center height: 250 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 3,000 rpm, bed width: 350 mm, total length: 3,300 mm, total width: 2,020 mm, total height: 1,900 mm, overall weight: 2,500 kg, travel distance X-axis: 165 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 500 mm Center distance: 1200 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 13/9 kW (AC drive) Spindle holder: Camlock D8 Spindle bore: 86 mm Including equipment a.o: - 8-station turret (Pragati BTP-80) with VDI-30 - Sliding control panel over the entire length Knjdsu T Iqyopfx Agzof - Pull-out chip tray - Siemens AC servo motors - Siemens supply and amplifier modules - Machining area covered by 2 sliding doors - Manual tailstock - Automatic central lubrication - Coolant system

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm Knjdpfju Ix Nrsx Agzsf total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Knodjw Rkt Ispfx Agzsf Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m