Used Cnc Multi Spindle for sale (21,337)

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm Lasdpfx Ahsz Ag Ansajh MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: used, Year of construction: 1997, Technical details: Lajdpfx Ajwl Nm Djhash number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: Ledpfx Ahjmduh Eeasah - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: excellent (used), Catalog number: 7759 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - blade adjustable forward/backward, up/down, angle Ledpfx Ahjzhvzksaoah - pneumatic feed of the unit forward/backward - blade guard - motor 2.2kW I and II spindle of the milling machine: - tenon spindle: - spindle diameter 40mm - working height of the spindle 150mm - spindle locking - pneumatic feed of the units forward/backward - manual adjustment up/down - max. milling cutter diameter 300mm - motor approx. 7.5kW - side carriage – manual feed - carriage dimensions length/width 1000x380mm - angle ruler - pneumatic clamping - dimensions length/width/height 2600/3200 (for shipping 2200) / 1540mm - weight 1450kg ADVANTAGES - Made in Germany - 3-spindle - Unpainted - Very good condition - Used tenoning machine Net price: 13900 PLN Net price: 3230 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), table width: 1,300 mm, table length: 2,500 mm, overall weight: 790 kg, number of axes: 3, Equipment: CE marking, documentation/manual, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Ljdpfx Asr D Ntfehaeah On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 - Center distance 32 mm. Laodpjx Rcqgofx Ahash

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, Lajdpfxsyqvlvs Ahash sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2010, Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible. Laodpfx Aowligqshaoh

Condition: used, Year of construction: 1991, Technical details: number of spindles: 6 spindle passage: 51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or Lasdpfx Ahsl Rmqpjajh *

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers Lsdpefriztofx Ahasah weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or Ljdpfx Aheyqpqxoaeah *

Condition: used, Year of construction: 2011, Offers considered prior to auction Laedpjz H Uzwefx Ahaoh Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150759 (2011) with Siemens Sinumerik/Index C 200-4D Control, Imeca Sir-MS32 Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Laodpfez Hc T Uox Ahajh Weight 1300 Kg

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs Ledpfx Aeu Idwbohasah i.D. *

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining Laodpfxsiay Sfj Ahash thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Ledpow D Uqfsfx Ahajah Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Lsdpezfv T Ijfx Ahaoah Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Ledpfx Ajz Agzdjhajah Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: used, Multi-speed machine with flexible shaft, BIAX Type MB 4-2 Lajdpfefim Tiox Ahash Machine No. 9/50/55, Year of manufacture approx. 1970 Length of flexible shaft: 2 meters Speed: 900 - 9000 rpm, infinitely adjustable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 hp Power connection: 380 Volts, 50 Hz - Handheld straight grinder with collet Ø 6 mm - Swiveling and rotating base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg Good condition Universally suitable for milling, grinding, and polishing operations.

Condition: excellent (used), Year of construction: 1967, Multi-spindle head, multi-spindle drill head, drilling gear -Multi-spindle head recording drive: MK4 -Max. Number of drill heads: 9 pieces -Number of cardan shafts: 4 pieces with MK1 mount -Take drill: MK1 -Largest drilling pattern Dimensions of the drill: 280 x 280 mm -Multi-spindle heads: are variable tools -for various processing: such as drilling, tapping, countersinking, reaming, -with which several holes: can be machined at once -Dimensions: 330/330/H515 mm Ledpfsd E Hlaox Ahajah -Weight: 36 kg

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm Ledewyuu Nspfx Ahaeah -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Ledpfx Asytf Ekjhajah Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: excellent (used), functionality: fully functional, number of spindles: 35 pneumatic head inclination Lasdew U Aiispfx Ahajh

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Lsdpexfzzqjfx Ahaoah Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 173180025, empty load weight: 975 kg, working height: 50 mm, working width: 3,000 mm, working length: 3,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 3,000 mm Working area, Z-axis: 50 mm Horizontal drilling spindles: 4 MACHINE DETAILS Power of main motor: 3 kW Voltage: 400 V Current consumption: 3 A Dimensions & Weight Lasdsy Tu Uiopfx Ahash Dimensions (L x W x H): 1,750 x 1,800 x 1,800 mm Net weight: 975 kg Transport packages: 1 EQUIPMENT CE marking Horizontal drilling machine Vertical drilling machine Saw unit included