Used Cnc Swiss Type for sale (41,769)

Condition: ready for operation (used), spindle bore: 36 mm, turning diameter over cross slide: 33 mm, turning length: 320 mm, Technical Data: Main Spindle: - Maximum turning diameter: 33 mm - Maximum speed: 8,000 rpm - Drive power: 5.5 kW - Drive power at 60% duty cycle: 7.5 kW Slide 1: - Z1 slide travel: 320 mm - X1 slide travel: 50 mm - Y1 slide travel: 255 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 25 mm Tool Slide 1: - Number of stationary tools with 16 x 16 shank: 5 tools Slide 2: - X2 slide travel: 165 mm - Z2 slide travel: 200 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 30 mm Tool Slide 2: - Number of turret stations with integrated spindle: 8 positions - Number of axial driven tools (integrated): 8 positions Coolant tank capacity, approx.: 400 liters Coolant pump max. flow rate: 80 l/min Dimensions (L x W x H), approx.: 2,460 x 1,510 x 1,750 mm Equipment: Dkjdpfsw Rcd Ejx Apwjr - Fanuc iT CNC control - Parts discharge system - IEMCA bar loading magazine - 5-position tool plate for Slide 1 - Electrical and software interface for bar loading magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder - Part pusher for pick-up spindle

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg Dsdpfxewwarus Apwskr weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Dedpfx Apev Nw Npowjkr Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, CNC gearboxes for use in Weinig machines or similar. Djdpezrxlmsfx Apwskr

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Djdpfx Apoyf Dp Ejwskr Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2005, CITIZEN K16 VIIP Djdozp Ecajpfx Apwskr Year 2005 with bar feeder

Condition: used, Year of construction: 2003, CITIZEN L5 20 with bar feeder, year 2003. Dksdpfx Apszp Eaxowjr

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Djdpfozp D Uuex Apwskr Number of axes: 6 Rapid traverse rate, X1 axis: 24,000 mm/min Rapid traverse rate, X2 axis: 24,000 mm/min Rapid traverse rate, Z1 axis: 32,000 mm/min Rapid traverse rate, Z2 axis: 32,000 mm/min Rapid traverse rate, Y1 axis: 15,000 mm/min Rapid traverse rate, Y2 axis: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm C-axis resolution: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm C-axis resolution of the counter-spindle: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool holder: 8 Number of positions in turret 1: 5 Number of driven positions in turret 1: 3 Speed of driven tools in turret 1: 8,000 rpm Number of positions for secondary machining: 8 Number of driven positions for secondary machining: 4 Speed of driven tools for secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Spindle Taper 50 Dsdpoyx Hv Asfx Apwokr Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Rapid power traverse to all motions 2,000mm/min Complete With: Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, SALE – 5% OFF CNC COLUMN TYPE METAL BANDSAW M2-330C The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles Dodpfx Apszd T H Aewskr • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: good (used), Year of construction: 2006, CNC Swiss turn Machine type: Gildemeister GD32-6 Control: GE Fanuc Series 16i-T Year: 2006 SPECIFICATIONS Turningdiameter: 33 mm Z-Axis: 320 mm Rapid motion: (X/Z): 30 m/min Max. auswerfen: ca. 190mm Max. revolution: 8.000 rpm Spindle power: 5,5 / 7,5 kW Tool capacity: 5+3 Req. space (LxBxH): 3,08 x 1,51 x 1,75 m Machine weight: 4.200 kg Equipment Dkjdpfxsziy Aze Apwjr Bar loader magazine: Iemca

Condition: good (used), Year of construction: 2006, CNC Swiss turn Machine type: Citizen K 12 VII 1F7P Control: Fanuc Year: 2006 SPECIFICATIONS Main Spindle Max. turning length: 200 mm Turningdiameter: 12 mm Bar capacity: 12 mm Spindle speeds: 15.000 rpm Max. front thread diameter: M8 Spindle diameter: 16 mm Max. Machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. Drilling diameter for back machining: 6 mm Dkedpfx Aezim Haopwjr Max. Thread diameter for rear machining: M5 Spindle speed, counter spindle: 10,000 1/min Tool set, number of tools: 8 Speed of the driven tools: 6000 rpm Powered tools for the rear side not available

Condition: good (used), Year of construction: 2008, CNC Swiss turn Machine type: Citizen C-32 VIII 2M8 Year: 2008 SPECIFICATIONS Main Spindle Max. turning length: 320 mm Turningdiameter: 32 mm Spindle speeds: 200 - 8.000 rpm Subspindle Dkjdpfxszim Evs Apwer Spindle speeds: 200 - 7.000 rpm Driven Tools Equipment Bar loader magazine: FMB turbo 3-36

Condition: used, Year of construction: 2018, operating hours: 21,823 h, functionality: fully functional, machine/vehicle number: A320A/1566, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, overall weight: 2,200 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, working length: 330 mm, input voltage: 200 V, power: 7.1 kW (9.65 HP), We offer this used Citizen A20-3F7 turning automatic lathe without pomp, year of construction 2018. Model: A20-3F7 Serial Number: AF6613 Manufacturing Number: A320A/1566 Manufacture Date: 2018-03 Full Load Current: 20.2 A Rated Power: 7.1 kVA Short Circuit Interrupt Rating: 2.5 kA Mass: 2200 kg Input Voltage: AC 200 V, 3-phase, 50/60 Hz Country of Origin: Thailand The maximum workpiece diameter is 20mm and the length is 200mm (in GB mode). The maximum main spindle speed is 10,000 rpm. The maximum rear spindle speed is 8,000 rpm. The machine includes: - chip conveyor; - workpiece conveyor; - bar feeder; - oil mist extractor; - tooling for long workpieces (up to 330mm); If you have any questions or need more information, feel free to send us a message or give us a call. Dkodpfx Aozp E Ebopwer

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Dodpfxsyrhcpj Apwekr Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, The Nicolás Correa Brava-30 fixed bed milling machine is designed for machining large workpieces where precision and rigidity are essential. This machine is equipped with a Selca S4045D CNC control and an automatic UAD head, featuring an ISO 50 spindle with 30 kW power and speeds of up to 6,000 rpm. The Brava-30 is suitable for applications ranging from roughing to fine finishing. The machine has a working table measuring 3,500 × 1,100 mm capable of supporting up to 8,000 kg, making it ideal for the mould, die and metal structures industries. Its features include internal coolant supply, chip extraction system, full enclosure guarding and measuring probes, ensuring reliability and efficiency in demanding industrial environments. It also offers a rapid feed of 30 m/min and a hydraulic clamping system that improves machining efficiency. With travel capacities of 3,000 mm on the X axis, 1,250 mm on the Y axis and 1,500 mm on the Z axis, this milling machine provides versatility and adaptability for a wide range of manufacturing tasks. Dedpfsulwy Aox Apwskr Accesories: - Coolan System - Coolan Through Spindle - Handwheel - Tool Probe Heidenhain - Preparation Renishaw Touch Probe - Integral Splash Guard - Chip Conveyor (2 Chip Augers + Lateral 1) - Automatic tool changer (24 tools)

Condition: ready for operation (used), Bosch CNC servo module, type CC100M, without CP/MEM3, used, in good condition, 100% functional. Dkodpfx Asi D T Sgepwer

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis Dedpfx Apek Dz Diewskr 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid Dkjdpfxouq A D Ro Apwsr - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid Dkedpfxounr H Ao Apwer - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: excellent (used), X-axis: 6,000 mm Y-axis: 1,500 mm Z-axis: 1,500 mm Max. workpiece size: 6,000 x 1,500 x 1,500 mm Spindle connection: SK50 Spindle speed: 4,000 rpm Control system: HEIDENHAIN TNC 426 Dkodpfx Apezcpwvswer Including documentation. Machine was overhauled in 2002, is in very good condition, and can be inspected while powered on.

Year of construction: 1989, condition: ready for operation (used), CNC Milling Machine Bed Type Mecof MG 88 G Table 6000x1060 mm X-6000 mm Y- 2000 mm Z-1000 mm Control Siemens 828 DSL Dodoh H Nd Aepfx Apwokr

Condition: good (used), Year of construction: 2001, CNC bed-type milling machine, manufacturer: IBERIMEX-MVR Type: UH-1250, year of manufacture: 2001 Control system: Heidenhain TNC124 Travel distances: X 1250 mm, Y 500 mm, Z 460 mm Djded Eranjpfx Apwskr Clamping table: 360 mm x 1800 mm Spindle mount: ISO50 Machine with full enclosure. Further data can be found on the machine data sheet. Machine in good condition.

Condition: used, Year of construction: 2010, Technical details: Dkedpjwf Nrajfx Apwer spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Condition: used, Year of construction: 2005, Technical details: spindle passage: 38 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min max. torque on the spindle: 190 Nm Dodpfx Aey Ttyqepwskr tool turret: Typ Sauter operating pressure: 5 - 6 bar rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,5 t dimension machine xH: 4,8 x 2,4 x 2,3 m