Used Cold Light Source for sale (18,747)

Condition: excellent (used), Year of construction: 2017, Behringer HBE 321 A Dynamic, manufactured in 2017 – low operating hours, more information to follow. The machine is currently being delivered. Dksdpfezrgn Nsx Apwjr - The photos show the original condition.

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw Dkedpfezrpl Dox Apwsr - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW height of material-table 900 mm dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg Dodpfx Apszr Rqbewokr

Condition: used, Year of construction: 2016, Technical details: Dedpezrfm Dsfx Apwskr weight: 22 t

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Dkjdpfxjzr I Ahe Apwer Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: not inspected (used), ABUS Light Portal Crane LPK Year of manufacture: 2022 Machine number: 220-251780 Condition: Uninspected Delivery terms: Free on truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - upon agreement Net price: €6,600 Payment terms: Advance payment - by bank transfer Internal no.: 174-1 Technical data: Crane bridge / crossbeam: approx. 3,600 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Dodpfjzqfn Esx Apwokr Height of running/foot beams incl. rollers: approx. 400 mm Lifting device: ABUS electric chain hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Features: Electrically movable chain hoist / load hook (left/right) Scope of supply: Available documentation as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to the destination. ► The quoted price is net plus VAT. ► The goods are sold with exclusion of any warranty. ► Technical data without guarantee. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Fully hydraulic circular saw machine for workshops and production. The material is clamped using hydraulic clamping cylinders. The control system offers simple machine operation. The angle can be adjusted using a vernier scale with a resolution of 0.1 mm. The saw feed is controlled by a hydraulic cylinder, ensuring maximum cutting accuracy. If you have any further questions or require a different cutting range, please do not hesitate to call. We would be happy to show you the machine and demonstrate its capabilities. Technical data: Band saws KASTO Machine type GKS U Technical data Drive power, saw gearbox 1.6/2.5 kW Cutting speed 14/28 m/min Cutting range, round: 140 mm Cutting range, flat: 160x90 mm Saw feed, hydraulic Hydraulic Dksdpfx Ajzqmh Tepwsr Saw blade dimensions 425 mm Material support 1050 mm Machine dimensions Length/Width 1250x1205 mm Height 1900 mm Machine weight 980 kg Year of manufacture 1992 Accessories 3000 mm 1x Horizontal clamping cylinder Coolant system Protective hood Pin guide Height adjustment Pressure switch

Year of construction: 2023, operating hours: 1,500 h, condition: excellent (used), functionality: fully functional, Abstracts This is a high-quality system that mixes and homogenizes up to 3 additives in a hot mixer. The control system is included in the scope of supply. First, the material is transported from the production area to a storage silo. From this first silo, the material is fed into the hot mixer, then into the cooler, and finally into a second silo for intermediate storage. After that, there is the option to directly fill the powder onto a big bag filling scale or to compress it into pellets using a pellet press and then fill them. The steel structure is included in the scope of supply. Where necessary, the system is designed according to ATEX standards. Dkjdpsztc Nfofx Apwor In the Documents section, you will find a detailed English and German description of the complete scope of this system. Do not hesitate to call us to discuss and demonstrate the system. A similar system can be inspected in Europe. Main machines: • Mixaco hot mixer HM3000 - 400 kW • Mixaco cooling mixer KM9000 - 90 kW • Steel structure • AZO feeding station and gravimetric dosing for 2 solids and 1 liquid • AZO 2 special dosing scales for difficult-to-flow powders or solids • AZO 4 transport line, pressure and vacuum conveying • AZO 2 metrologically verifiable big bag filling stations • AZO control system • Kreyenborg silos ATEX 15 m³ • Kahl pelletizer 37-850 – 132 kW with box cooler and accessories The system was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered at a port or in the production facility in Europe, EXW. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Dodpfx Apjzr Tcaewjkr Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front Dedpfx Aozr Tcgopwokr All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights Dksdpfjzr Tcysx Apwer 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, Year of construction: 1995, saw blade diameter 350 mm cutting diameter 120 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: flat 95 x 100 mm turning speeds 34 / 88 U/min total power requirement 0,75/1,5 kW weight of the machine ca. 340 kg. dimensions of the machine ca. 0,7 x 1,0 x 1,85 m Features: Dksdpfxszmy E Ds Apwer - Coolant system - Replacement saw blades

Condition: excellent (used), Process monitoring/tool monitoring for cold forming 2-channel device configured for a forming press incl. 1 sensor box and 1 interface Brankamp C20 devices detect process disturbances, protect the machine and tool from overloads, improve the quality of the produced parts, and assist operators in setting up the machine more quickly. In the event of manufacturing problems (e.g., tool breakage or ejection errors), they shut down the machine early to prevent costly consequential damage to the machine and tool. Dkodpjzr U Tmofx Apwsr The system is complete.

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting Dkjdozmubyopfx Apwjr -Manufacturer: Ceag, Cooper Safety LED emergency exit sign with 3 pictograms, unused, original packaging -Type: SV EURO 1-3/D -Connection: 230 V -Cardboard dimensions: 360/220/H110 mm -Weight: 1.8 kg

Condition: new, functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 2,756 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 80 l, color: grey, driver cabin: day cab, gearing type: automatic, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,765 mm, total width: 2,095 mm, total height: 2,300 mm, loading space length: 3,512 mm, Year of construction: 2026, Equipment: ABS, Apple CarPlay, air conditioning, airbag, blind spot assist, car registration, cruise control, electronic stability program (ESP), lane keeping assist, navigation system, non-smoking vehicle, power assisted steering, traction control, This Iveco Daily with a materials compartment and aluminum tipper body is available from stock. Djdpozrn Spefx Apwokr

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Sprinter 517 Lord Light, stock vehicle with COC Available from September 15th Promotional price. List price > 100,000 Euros. Dodpfxszti Rpj Apwjkr 100% Made in Germany for the interior fittings. All original MB components, no modifications required except for the emergency exit hatch. No re-import; German vehicle with up to 5 years of warranty including a maintenance contract. Several vehicles available for short-term delivery. - Length 7336 mm - Height 2800 mm - Width 2001 mm Assistance systems GSR3 - 170 hp, Euro 6 e - 9-speed automatic transmission - Tires 205/75 R 16 C - Tire pressure monitoring - Main tank 93 l - HVO compatible - Flush-mounted indicator lights on the roof - Sliding door on the right - Electric operation for the sliding door - Electric step - Mud flaps front and rear - Comfort driver's seat with armrest - Folding cover for storage compartment on the dashboard - Heated and electrically adjustable/foldable exterior mirrors - Additional heater at the rear - Auxiliary hot air heater for passenger compartment - Roof air conditioning system (basic) - Semi-automatic, regulated Tempmatic air conditioning - Digital radio with 2 speakers at the driver's position - Acoustic package - USB socket - Multifunction steering wheel adjustable for height and inclination - Headlight assistant - Hill start assist - Rear view camera - Blind spot assist - Crosswind assist - Start-up information assistant - Turning assistant - 21 passenger seats, adjustable rearward, except for the last row - Original co-driver's seat - Total capacity including driver: 23 - Roof hatch/emergency exit hatch - Double glazing / frameless Promotional price for this configuration: 74,990 Euros. Net export possible. Custom orders possible. For custom orders, optional: Instead of a sliding door with an electric step, we can provide an original hinged door with a recessed entry at no extra cost. A part of the body is cut out and a fiberglass part is inserted. The door extension is screwed on. - Electric door drive for original hinged door, manufacturer Autocool: 2,000.00 € - Microphone Bosch: 1,000.00 Euros The Sprinter Lord Light is available from 69,990.00 Euros.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Sprinter 515 Lord light – Available for short-term delivery starting September 15th. 100% Made in Germany for the interior fittings. All original MB parts, no cutting or modifications required, except for the emergency exit hatch. Promotional price / List price > 100,000 Euro. Up to 5 years of warranty, including a service contract, optionally available. - Length 7336 mm - Height 2800 mm - Width 2001 mm Assistance Systems GSR3 - 150 hp Euro 6 e, manual transmission; optionally available with a 9-speed automatic transmission - Tires 205/75 R 16 C - Tire pressure monitoring system - Main tank 93 liters - HVO compatible - Flush-mounted indicator lights on the roof - Sliding door on the right - Electric operation for the sliding door - Electric step - Mud flaps front and rear - Comfort driver's seat with armrest - Folding cover for storage compartment on the dashboard - Heated and electrically adjustable and foldable exterior mirrors - Additional heater at the rear - Auxiliary hot air heater for the passenger compartment - Basic roof air conditioning system - Semi-automatic Tempmatic climate control system - Digital radio with 2 speakers in the driver's area - Acoustic package - USB socket - Multifunction steering wheel, adjustable in height and inclination - Headlight assistant - Hill-start assist - Rear view camera - Blind spot assist - Crosswind assist - Start-up information assistant - Turning assistant - 21 passenger seats, adjustable backwards, except for the last row - Original passenger seat - Total capacity with driver: 23 - Roof hatch / emergency exit hatch Manual: 69,990.00 Euro 517 with automatic transmission: 73,990.00 Euro 517 automatic transmission and double glazing: 74,990.00 Euro Custom orders possible. For custom orders, optionally: Instead of the sliding door with electric step, we can supply an original hinged door with a recessed step at no extra cost. A section of the body is cut out, and a fiberglass part is inserted. The door extension is screwed on. - Electric door drive for the original hinged door, manufacturer Autocool: 2,000.00 Euro - Microphone Bosch: 1,000.00 Euro Fast delivery possible. Net export possible. Dkedpozti S Hofx Apwsr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AT 112 M8/4 IMB14F130, saw blade diameter: 315 mm, - NEW PRICE - Dsdpszarnrefx Apwjkr For sale due to business closure. The machine is in very good condition and fully functional. It comes with 1 original base frame and 2 roller conveyors, one measuring 5200 mm and the other 2200 mm. The saw blade is new and unused.

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 04/2026, fuel type: diesel, number of seats: 62, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 13,000 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other Dkjdpfx Apeyy I Szower - Webasto Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 04/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Webasto Other Djdpfx Ajyyxngjpwekr - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 04/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Webasto Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more. Dsdpjyyxr Sefx Apwjkr

Condition: new, Year of construction: 2026, Saw Diameter: 500 mm Motor Power: 4 kW Djdpfxoxdciae Apwekr Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: Dksdpfezl E Twsx Apwjr - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâ??s manual

Condition: excellent (used), Reflective light barrier, light barrier, reflective light switch, reflective switch, light switch, reflective light barrier, reflective light switch, one-way light barrier Dsdpfx Aezlyvgopwskr -Manufacturer: ifm, efector200 photoelectric sensor one-way light barrier transmitter, unused -Type: OG5116 -Cardboard dimensions: 95/65/H30 mm -Weight: 0.1 kg

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 03/2026, fuel type: diesel, number of seats: 62, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 13,000 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Webasto Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more. Dkedpfx Apoyylg Nower