Used Cold Pilger Rolling Mill for sale (7,312)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 013531, An efficient and economical lamination process is realized with the SMARTLAM CHK hot-cold transfer press system (Twin Stack series). Gsdjxwdmaopfx Ah Eobw The SMARTLAM CHK is a twin-stack system that offers higher efficiency and increased output compared to conventional single-stack systems. By using two presses—one for heating and one for cooling—cycle times and energy consumption are significantly reduced. Depending on the material and laminate structure, up to 4 cycles per hour can be achieved with the SMARTLAM when processing 10 laminate layers per level. It is possible to place multiple laminates side by side in a single cassette. In alternative short-cycle test operation, approximately 1–2 cycles per minute can be achieved with one laminate layer per cassette (without vacuum and without a pressurized preheating phase).

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Godpfjpwbvkjx Ah Esbw

Condition: ready for operation (used), empty load weight: 1,350 kg, total length: 1,960 mm, total width: 1,170 mm, total height: 1,070 mm, additional equipment features: CNC full automatic, Full automatic circular saw Automatic CNC positioning of sawblade = automatic turntable, up to 180° left and right Equipped with: 1 - workpiece storage unit (green) + auto rollerconveyor, length 7 meter 2 - auto feed-in by pulling workpiece to sawblade, max single movement of 2000 mm - repositioning is possible for longer lengths 3 - auto feed-out of cut workpiece, max movement of 1000 mm 4 - unloading table with chains Automatic zero point recognition Gsdpfoxpki Eex Ah Ejbw Automatic programmed controlled processing of cutting sequences Storing of programs with different sawing tasks Dia saw / abrasive - disk: max 425 mm Turningspeeds: 6 > 30m/min Power needed / motorpower: 5,5 kW

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Maximum rolling thickness: 4 mm Gjdpfx Ahjxn Tgwe Eebw Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Gjdpjxwqdrjfx Ah Eebw

Condition: used, Year of construction: 2010, Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data  Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025 Gbodpfxjxn T Nfj Ah Eow

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg Gbedpfxjvmtdke Ah Ejw dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Gbsdsxpd D Nepfx Ah Eow Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: used, Year of construction: 1988, Technical details: throat: 138 mm plate thickness: max. 1,12 mm infeed height: 1125 mm voltage: 380 V total power requirement: 0,25 kW weight of the machine ca.: 0,149 t dimensions L x W x H: 0,9 x 0,6 x 1,4 m -application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in Gbedpfxsu Icvij Ah Eow -stop plate 130mm adjustable operation at the control box and via foot switch The machine is mounted on a steel construction. *

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links Gbedexn Anwspfx Ah Eew capacity 45 degrees: round 75.0 mm rechts

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Gbsdsd Tp Nljpfx Ah Ejw

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M50E/9044, Offer Number: M50E/9044 Machinetype: hot rolling machine Make: SKF Type: EMB 200A Gbodpsw E N Saofx Ah Eow Constr. year: 1980/2021 diameter range: 200 mm max. outside dia. of round pieces: 200 mm kind of heating: 200 KVA Location: Europe

Condition: used, Year of construction: 1978, Wilhelm Schaefer KG Model SRMVQ Heavy Duty Plate Rolling Machine With Roller Conveyor Supports Gbsdpoxvx N Hjfx Ah Eew Capacity 3,000mm Wide. Top Roll Ø530mm. Weight 65 Ton. Machine Number 4284

Condition: used, mileage: 525,115 km, first registration: 07/2014, fuel type: diesel, color: other, tire size: 305/70/22.5, fuel: diesel, wheelbase: 5,900 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,480 mm, loading space length: 7,820 mm, loading space height: 2,280 mm, Year of construction: 2014, Equipment: air conditioning, cruise control, low noise, = Additional options and equipment = Gbodpowybp Hefx Ah Eow - Aluminum fuel tank - Electric windows - Speed limiter - Air suspension - Fog lights - Radio/CD player - Reversing camera - Electrically adjustable side mirrors - Digital tachograph = Further information = Tyre size: 305/70/22.5 Brakes: disc brakes Front axle: suspension: leaf spring Rear axle: suspension: air suspension Empty weight: 9,960 kg Dimensions (L x W x H): 782 x 248 x 228 cm Cooling engine: diesel Damages: none License plate: KTG512

Condition: used, functionality: unexamined, Year of construction: 2001, Bending machine ZOPF - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm Gedpfx Ahoxu Ikwo Ejbw

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm max sheet thickness 3.0 mm Gjdjxnc N Uopfx Ah Esbw roller diameter 110 mm motor driven

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm Gbjdpfxoxnc U Ro Ah Eow cutting range 1000 x 220 mm cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: good (used), Year of construction: 1986, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: Gbedpfx Ahet A Ar Sj Esw - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Gsdpfxexqyxlj Ah Eebw Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Roll length: 1280 mm Gbjdpfx Ahexnpwxo Ejw Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive – Side-opening top roll – Main motor with brake system – Cone bending device – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected Gbedjxnmn Uopfx Ah Eew

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is a Kaltenbach cold circular saw. The gearbox is backlash-free! Model: KKS 450 E Saw blade diameter: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range, square material: 140 mm Working range, flat material: 305 x 20 mm Working range, round material: 130 mm Min. working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 1,200 kg Inspection/collection in 89558 Böhmenkirch Shipping available on request Gjdpfx Aext Uk Ueh Eebw Forklift for loading available.

Condition: used, Year of construction: 2011, Profiling machine in good condition Specification Model: Schlebach Quadro LT Gbedpew E H Dasfx Ah Ejw Made in: Germany Product width: 540 mm Cutting: circular shears Weight: 910 kg If you have any further questions, we will be happy to answer them.

Condition: repair required (used), functionality: not functional, Year of construction: 1977, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 435 mm, side roll diameter: 435 mm, roller diameter: 435 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 35,000 kg, total length: 8,000 mm, total width: 2,500 mm, total height: 2,720 mm, power: 40 kW (54.38 HP), input voltage: 380 V, Equipment: centralized greasing system, emergency stop, swiveling upper roller, 3roll plate bending machine 2500x40 mm Sertom -Italy Godjxqq Iqepfx Ah Eebw Rollers length 2550 mm -Top roll 435 mm -Side rolls 435 mm Capacity rolling -plate width 2500 mm -plate thickness 40 mm -pre-bend 35 mm We sell as is Machine need hydraulic repair DIMENSION 8000X2500XH2720 MM WEIGHT 35 ton POWER INSTALLED 50 Hp

Condition: used, functionality: fully functional, Year of construction: 2004, For sale: CNC Rolling Machine FARMAR (Famar S.N.C.) Condition: Used, in good technical working order, ready for operation. Reliable, robust construction from Italian manufacturer Famar S.N.C. The rolling machine is designed for bending and forming sheet metal and plates. Capable of rolling both round and oval workpieces. The roller covers are damaged; it is recommended to replace the coating. Technical specifications: Year: 2004 Working length: 1300 mm Maximum pre-bending thickness: 0.5 mm Gbjdpfxjxlif Dj Ah Esw Maximum rolling thickness (Kr = 40 kg/mm²): 1 mm Central roller diameter: 80–90 mm Side roller diameter: 90 mm Total machine length: 2150 mm Machine width: 1000 mm Machine height: 1100 mm Working table height: 1000 mm Hydraulic system motor power: 1.5 kW Working speed: 5.5 m/min Pre-bending speed: 2400 mm/min Power supply voltage: 380 V Frequency: 50 Hz Weight: 1300 kg Application: The machine is designed for rolling, bending, and manufacturing cylindrical shapes from sheet metal. Suitable for steel, aluminium, and other materials up to 1 mm thickness. Ideally suited for small and medium-scale production where precise, repeatable rolling results are required. If you have any further questions, please feel free to contact us.