Used Computer To Plate for sale (23,510)

Condition: used, For export only! Ndjdpez Nf Unefx Akqec Heights Titanium 85 plate processing machine.

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line Ndjdpfoz N Np Njx Akqec - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW Ndjdpsz N Hwqjfx Akqec weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: used, For export only! Ndedpfxsz N Slgs Akqec G&J C85 Cleaning Unit

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm Ndjdpfsz N Tbpsx Akqjc dimensio between the first plate to the spindle ca. 170cm

Condition: new, neu 090256 Dezember 2026, Zwischenve Türkei 7500 € 144.75 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending Njdewira Iopfx Akqedc 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm Ndodpfx Akezxrkvoqjc suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, Year of construction: 1973, sheet width 1500 mm Ndjdpjzxt Trsfx Akqec plate thickness 5 mm weight 3,8 t

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Ndedpfx Akezxxgwjqoc Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Ndodpfxozyx Nbo Akqec Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: new, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,200 kg, color: black, gearing type: automatic, number of seats: 3, total length: 7,880 mm, total width: 2,314 mm, total height: 2,930 mm, loading space length: 5,220 mm, loading space width: 2,200 mm, loading space height: 908 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO truck for transporting machinery with a platform body (aluminum) BASIC DATA / STANDARD EQUIPMENT ? Axle configuration: 2 axles, rear-wheel drive ? Vehicle variant: Standard ? Chassis with cab ? Rear axle suspension: Air suspension ? Front axle suspension: Quadro-Tor torsion bar suspension ? Transmission: HI-MATIC 8-speed automatic transmission ? Rear axle: Twin tires on the rear axle ? Steering: Left-hand drive Nedpfez Rh D Iex Akqedc ? Engine: 3.0L DEVIe 129 kW (176 hp) ? Wheelbase: 4,350 mm ? Permissible total weight: 7.2 t SEATING ? Seatbelt pretensioner for passenger side ? Safety belts with warning signal for driver and passenger ? Safety belts in standard color ? Seat covers in fabric ? Luxury seat for driver with armrest and lumbar support ? Adjustable in height, inclination and length ? Hydraulically sprung, heated ? Seat heating ELECTRICS / LIGHTING ? AIR PRO controls in the cab ? Body manufacturer interface ? Connectivity Box 4 GW provides you with free use of the digital service "Smart Pack" for a period of five years. A prerequisite for this is that you agree to the validity of the applicable General Terms and Conditions for the use of the telematics service and for the collection and use of your data. The telematics is already integrated into the vehicle and will be activated if you agree. ? Digital EG tachograph 4.1 ? Manual remote control ? Light and rain sensor ? Windshield wipers, standard halogen version ? Daytime running lights ? Trailer socket 12 Volt, 13-pole ? Battery 12 Volt 105 Ah / 950 Amps ? Switch in the dashboard for lighting in the body ? Additional, programmable CAB EXTERIOR ? Turn assist for passenger side (BSI) ? Electrically adjustable and heated exterior mirrors ? Daily MY 2024 ? Rear window in cab ? Lane departure warning system LDWS ? Monitors the lane position and provides visual and acoustic signals when leaving the lane ? Vehicle width 2,000 mm ? Iveco badge, chrome ? Black grille ? Advanced Emergency Braking System (AEBS) with City Brake ? Windshield wipers without high-pressure cleaning system (TPMS) ? Tinted windows ? Side vehicle lettering ? Mirror for body width 2,350 mm ? Fuel filler in B-pillar, lockable ? Type plate Daily ? Front obstacle detection (MOIS) ? Additional vehicle key with remote control ? Rear view camera ? Blind spot radar behind cab CAB INTERIOR / AUDIO ? CoC confirms VWTA approval ? Electric windows for front doors ? Front airbags for driver and passenger with seatbelt pretensioner ? Speed limiter 90 km/h ? Grab handle on A-pillar for driver and passenger ? Left-hand drive for right-hand traffic ? Driver drowsiness detection system (Driver Drowsiness Attention Warning) ? Rear wall insulation ? Wheel chock, 2 pieces ? Traffic sign recognition with intelligent speed assistant (ISA) ? Portable warning flasher ? Warning triangle, design and dimensions according to ECE-27 ? Central locking with remote control ? Leather steering wheel with function buttons for radio, telephone ? Preparation for toll system (OBU), antenna ? Wiring in the dashboard, without receiver ? Speed limiter ? Cruise control, menu navigation CHASSIS ? AdBlue tank 20 liters under cab ? Trailer load 3.3 t ? Tires 225 / 75 R 16 C - tread ? Steel ladder frame ? Parking brake, manual, center ? Fuel tank integrated, 90 l capacity

Condition: new, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,200 kg, loading space length: 5,250 mm, loading space width: 2,200 mm, loading space height: 908 mm, number of seats: 3, Year of construction: 2026, total length: 7,880 mm, total width: 2,314 mm, total height: 2,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO 70C18HA8/P with Wiese aluminium body, unladen weight 2,940 kg!! BASIC DATA – STANDARD EQUIPMENT SPECIFICATION Axle configuration: 2 axles, rear-wheel drive Vehicle variant: Standard chassis with driver’s cab Rear axle suspension: Air suspension Front axle suspension: Quadro-torsion bar suspension Transmission: HI-MATIC 8-speed automatic transmission Rear axle: Twin tires on rear axle Steering: Left-hand drive Engine: 3.0L DEVIe 129kW (176 hp) Wheelbase: 4,350 mm Gross vehicle weight: 7.2 tons SEATING Seatbelt pre-tensioner on passenger side Seatbelts with warning signal for driver and passenger Standard color seatbelts Fabric seat covers ELECTRICS/LIGHTING AIR PRO controls in cab Body manufacturer interface Connectivity Box 4 GW also provides free use of the 'Smart Pack' digital service for five years, provided you accept the applicable terms and data usage policy. Telematics system is pre-installed and activated upon consent. EU digital tachograph 4.1 Manual remote control Light and rain sensor Standard front wipers Halogen daytime running lights EXTERIOR OF DRIVER’S CAB Passenger-side turn assist (BSI) Electrically adjustable and heated door mirrors Daily MY 2024 Rear cab wall window Lane Departure Warning System (LDWS) Monitors lane position and provides visual and audible signals upon lane departure Vehicle width: 2,000 mm Iveco badge chrome Black grille Emergency brake assist AEBS with city brake Wipers without high-pressure cleaning system (TPMS) Tinted windows Side vehicle designation Mirrors for body width 2,350 mm Lockable fuel filler cap on B-pillar Daily type plate Forefield monitoring (MOIS) Interior/exterior audio system Cocü confirmed with consent VWTA Electric windows for front doors Front airbags for driver and passenger with pre-tensioner Speed limiter: 90 km/h Grab handle on A-pillar for driver and passenger Left-hand drive for right-hand traffic Driver drowsiness attention warning Rear wall insulation 2 wheel chocks Traffic sign recognition with intelligent speed assistant (ISA) Portable warning beacon Warning triangle compliant with ECE-27 directive DRIVER’S CABIN / AUDIO Central locking with remote control CHASSIS 20-liter AdBlue tank under cab Towing capacity: 3.3 tons Tyres: 225/75 R 16 C profile Steel ladder frame Manual central parking brake Ndodpfez Rh D Usx Akqec Integrated 90l fuel tank Adaptive rear air suspension Spare wheel matching chassis tyres Spare wheel carrier under frame overhang Steel wheels Standard front axle suspension Engine/Transmission/Axles Emissions standard: EURO VI Exhaust pipe centrally under vehicle HI-MATIC 8HP automatic torque converter transmission Heated fuel filter EDC-controlled diesel particulate filter Homologated for goods transport Comfort noise insulation Remote start brake control Aluminium radiator Crankcase vent heated Engine speed: 3,500 rpm SEATING Luxury driver’s seat with armrest and lumbar support, height, tilt, and longitudinal adjustment, hydraulically suspended and heated Speed limiter Cruise control with menu navigation Dashboard wiring

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. Nsdpsz H Uklsfx Akqedc For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, mileage: 231,540 km, power: 316 kW (429.64 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained MAN TGS 26.430 with approx. 6.10 m platform body for scaffolding/timber construction, with ADR for gas transport, 6x2/4 drive with steered front axle, air-suspended rear axles, wheelbase 3.15m, GVWR 16.4 tonnes, 430 hp, trailer hitch, automatic transmission, mounting for forklift attachment at the rear, air conditioning, navigation system, cruise control, engine brake with 3 levels, from first owner, in excellent condition, and more. M cab, medium length with rear protective grille Euro 6 D engine with 430 hp and 2,200 Nm of torque 6x2/4 drive with LOL-08 steered, liftable front axle Unladen weight 9,535 kg Payload 16,465 kg Differential locks in rear axle Wheelbase 3,150 mm + 1,350 mm Special platform with all-round perforated rails for load securing Platform body approx. 6.10 m long and approx. 2.55 m wide, front wall approx. 1.20 meters high Mounting for a forklift at the rear Wiring for tank trucks according to ADR Dangerous goods equipment according to ADR type AT ADR inspection and certificate MAN TipMatic12 26 DD transmission MAN EasyStart with TipMatic MAN BrakeMatic ABS, ASR, ESP Disc brakes for front and rear axles Controlled rocker arm brake (EVBec) Engine brake with 3 levels Emergency Brake Assist 2 (EBA2) MAN Lane-Guard System IV Front axle leaf-sprung, rear axles air-suspended Front axle VOK-09 curved, rear axle hypoid HY-1350 Front axle load 7,500 kg, rear axle load 11,500 kg Stabilizer bar for front and rear axles HY axle ratio i=2.71 Trailer hitch Rockinger Type 400 G 150 A with air connections Duo-Matic quick coupling at the rear Trailer load with continuous braking system 26,470 kg Trailer load with SDAH/ZANH 16,000 kg Gross vehicle weight 44,000 kg Air conditioning Cruise control Sun visor 2 plastic storage boxes outside left + right Electrically adjustable and heated exterior mirrors Electric windows Dust box in the cab Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Radio MAN Media Truck Advanced 12 V with 7" color display MAN Navigation Hands-free functionality "Comfort" for 2 mobile phones German vehicle from first owner Ndsdpsz I Hnfofx Akqjc Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2621

Condition: used, mileage: 231,540 km, power: 316 kW (429.64 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained MAN TGS 26.430 with approx. 6.10 m platform body for scaffolding/timber construction, with ADR for gas transport, 6x2/4 drive with steered front axle, air-suspended rear axles, wheelbase 3.15m, GVWR 16.4 tonnes, 430 hp, trailer hitch, automatic transmission, mounting for forklift attachment at the rear, air conditioning, navigation system, cruise control, engine brake with 3 levels, from first owner, in excellent condition, and more. M cab, medium length with rear protective grille Euro 6 D engine with 430 hp and 2,200 Nm of torque 6x2/4 drive with LOL-08 steered, liftable front axle Unladen weight 9,535 kg Payload 16,465 kg Differential locks in rear axle Wheelbase 3,150 mm + 1,350 mm Nedpfx Akez I Hnljqodc Special platform with all-round perforated rails for load securing Platform body approx. 6.10 m long and approx. 2.55 m wide, front wall approx. 1.20 meters high Mounting for a forklift at the rear Wiring for tank trucks according to ADR Dangerous goods equipment according to ADR type AT ADR inspection and certificate MAN TipMatic12 26 DD transmission MAN EasyStart with TipMatic MAN BrakeMatic ABS, ASR, ESP Disc brakes for front and rear axles Controlled rocker arm brake (EVBec) Engine brake with 3 levels Emergency Brake Assist 2 (EBA2) MAN Lane-Guard System IV Front axle leaf-sprung, rear axles air-suspended Front axle VOK-09 curved, rear axle hypoid HY-1350 Front axle load 7,500 kg, rear axle load 11,500 kg Stabilizer bar for front and rear axles HY axle ratio i=2.71 Trailer hitch Rockinger Type 400 G 150 A with air connections Duo-Matic quick coupling at the rear Trailer load with continuous braking system 26,470 kg Trailer load with SDAH/ZANH 16,000 kg Gross vehicle weight 44,000 kg Air conditioning Cruise control Sun visor 2 plastic storage boxes outside left + right Electrically adjustable and heated exterior mirrors Electric windows Dust box in the cab Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Radio MAN Media Truck Advanced 12 V with 7" color display MAN Navigation Hands-free functionality "Comfort" for 2 mobile phones German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2621

Condition: excellent (used), Technical specifications: Working length: 4100 mm Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Condition: Njdez E A Suspfx Akqedc The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Nedpfx Aksz H Iymjqjdc Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm Ndodpfx Akjz H Iyyeqsc With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: used, Pair of cast iron angle plates Ndsdjz H I Abepfx Akqec Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Ndjdpsz H I Anefx Akqjc Unit weight: approx 6 T

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Nodoz H N Ifepfx Akqodc Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: Ndedpfx Asxaa I Sjkqoc - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW Ndsdpoxaa Rgjfx Akqec weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, neu Njdeyg N Szepfx Akqsdc ca. 10 Wochen ab Auftrags Türkei 19800 € 380.16 € 1550 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1855 mm 2220 mm 1630 mm 1230 mm 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min Njdpfx Aksyb Syweqedc 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended