Used Computer To Plate for sale (24,150)

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Ncsdpfx Aowlhd Uofzel Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Nodpfx Afeig Hu Nozjcl Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm Njdpfx Afswnfz Nozecl with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Ncedpfxowlhfls Afzol Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE Nsdpfsttlfkjx Afzecl ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: like new (used), functionality: fully functional, The Weber Slicer 305 is positioned as a powerful, compact, entry-level solution to high-tech industrial slicing, designed for low-to-medium volume production with maximum flexibility and hygiene. Ncodpfxsxxlhus Afzel Performance & Precision High Slicing Speed: Features a circular blade cutting system with a maximum cutting speed of 400 slices per minute (rpm). Wide Thickness Range: Offers great flexibility in product output with a cutting thickness ranging from 0.5 mm up to 50 mm. Versatile Slicing Presentations: Capable of producing a variety of presentations, including stacked, staggered stack, shingled, cross-shingled, endless shingled, and folded portions. Product Capacity: Can handle product lengths up to 800 mm with a slicing throat width of 250 mm and height options of 125 mm. Operational Benefits Ease of Operation: Described as easy to operate and "Plug & Play" (for the Basic model).Intuitive Control: Uses the Weber Power Control with a programmable touch screen color touch display for the Basic), ensuring rapid product changeovers. Superior Hygiene: Built with Weber Hygienic Design, which includes open designs and easy-to-clean components for simplified washdown. Quick Set-up Time: Allows for fast format and product changes via tool-less adjustable components. Ergonomic Blade Change: Includes a pivotable blade safety cover for safer and ergonomic blade changes. Manual Loading: Features manual loading, making it particularly suitable for small batches, frequent product changes, or special formats.

Condition: used, table length 1000 mm table width 660 mm table height 870 mm total power requirement kW Njdpfx Afou Sbf Djzjcl weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2014, length 1200 mm Nodpev Ig Acjfx Afzocl width 800 mm Thickness 160 mm

Condition: used, floor-plate length 1050 mm Nodpfx Asu Sbfkofzscl floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm

Condition: used, length 400 mm Nodpfx Afed Iha Rszocl width 270 mm weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4x0,27x0,03 m

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Nodpfoxzvp Ujx Afzecl Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Ncjdox Enfxspfx Afzsl Number of rolls: 4 Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Ncodpfx Ajx Dd Hyefzsl Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 Ncsdpfx Afjycxgmszel table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, length 1200 mm width 500 mm Ncsdotq I Rqopfx Afzel floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs Nedsb A Nbnjpfx Afzscl -Cast iron plate -Weight: 1050 kg

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage Ncjdpfoyckt Ssx Afzel TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Nedeyckt Eepfx Afzecl Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Nedpsycktrofx Afzecl Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Ncedpfxjf Srmzs Afzjl Press: 4,5 Bar

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind Nodjv Syyvjpfx Afzocl cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop Ncodpfjv Tk Efjx Afzol cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ncsdpfx Afjhtq N Nozel Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Njdpfopgndgsx Afzjcl Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm Ncedpfeybbz Dex Afzjl stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg