Used Construction Waste Dump for sale (21,842)

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window Fjdjz Dzqtspfx Al Uopn * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 2024, operating hours: 49 h, Rampicar ROTAIR R70AE Tracked Dumper Tool Carrier, Year 2024, approx. 49 operating hours, as new Fpodoz Hd Awopfx Al Ujn Description: * Maximum undercarriage load capacity 800kg * Honda GX390 petrol engine with electric start * Mono joystick for drive control * Hydrostatic drive system * Separate drive motors for each side * Undercarriage with centrally mounted oscillating rollers * Mechanical emergency brake * Tipping skip with self-loading shovel * 1 free hydraulic circuit with control lever * Various attachments can be fitted optionally; see Rotair manufacturer’s brochure (link) Despite our utmost care, errors in this listing cannot be completely excluded. Subject to errors and prior sale!

Condition: used, Year of construction: 2023, operating hours: 187 h, Equipment: all wheel drive, JCB 1T-2 high-tip dumper, manufactured in 2023, with only 187 operating hours! ----* Manufacturer: JCB * Type: 1T-2S5 High Tip Dumper * Year of manufacture: 2023 * Operating hours: approx. 187 * Last service: 03/2026 * High-tip dumper * Power: 16.1 kW * Payload: approx. 1,000 kg * Operating weight: 1,440 kg * Road traffic lighting (StVZO compliant) * Excellent condition Fsdpfoz E T Uyjx Al Uspn * Perkins diesel engine * Video available upon request (via WhatsApp) * Additional photos available upon request! * Price: 12,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee, subject to errors and prior sale.?

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Fedpfez Eqzqsx Al Uepn Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Fpedoz Enz Ispfx Al Uon Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. Fpedpfx Asz En A Sel Usn A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Fedpez Hkdnjfx Al Uspn Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Fedpfjz Hmpasx Al Ujpn Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 353 h, machine/vehicle number: A3000082409, load capacity: 230 kg, fuel type: electric, drive type: Elektro, working height: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 8,000 mm MACHINE DETAILS Drive type: Electric Operating hours: 353 h Fsdpfx Aljz I Iqno Ujpn External reference: SL16561

Condition: used, mileage: 310,900 km, power: 350 kW (475.87 HP), first registration: 07/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: 4550 mm wheelbase * 1 lower comfort bunk * Stream Space cab * Trailer hitch 40D * High Performance Engine Brake * Auxiliary drive for tipper pump * 385/65R22.5 front axle tires, 10-12 mm tread depth * 315/80R22.5 rear axle tires, 10-12 mm tread depth * AP rear axles 13 t * Rear axle air-suspended * Airbag, driver's side, * Trailer brake 2 - line, * Audio system: Digital radio DAB / DAB+, * Exhaust pipe straight, above 2nd axle, * Battery 220 Ah, * Bi-xenon headlights, * CB radio, * Interactive cockpit multimedia system, * Air horns (2) on cab roof, * Cab: steel-sprung, comfort, * Remote Online remote query function, * Speed limiter, * Transmission: 12-speed - Type: G 330-12, * Power Shift gearbox * Electric lift roof, * Rear axle differential ratio 233, * Interior filter for construction vehicles, * Cooler box / refrigerator, * Reinforced engine brake, * Navigation system, * Parameterizable special module, * Frame overhang 1300 mm, * Reversing warning signal (audible warning outside), * Headlight cleaning system (SRA), * Rear crossmember reinforced, * Interface for fleet management system, * Driver's seat: comfort air-suspension seat, * Exterior sun visor, * Sun blind, side window, driver's door, * Front axle stabilizer, * Additional stabilizer, rear axle * Additional 12V / 15 A socket in the passenger footwell, * Additional 24V socket in the passenger footwell, * Door extension for cab, * Work light, rear wall of cab, top, * Preparation for 4 surround view cameras (display in the on-board monitor), * Preparation for additional headlights, * Auxiliary heater (water) * Emission standard EURO 6, * Axle configuration: 8x4/4, * Front axle load 7.5 t * Cab: L StreamSpace, 2.30 m, tunnel 170 mm, * Cab variant: StreamSpace, * Cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: roof height 600 mm, cab variant: L, * Stowage flap outside left, * Windshield tinted with band filter, * Preparation for CB radio, * Storage compartment above windshield with lid, * Storage compartments with lid behind driver and passenger seat, * Lower comfort bunk, * Preparation for upper comfort bunk, wide, * Drawers under bed, * Curtain for sleeping cabin, * Seats in cab: driver's seat backrest foldable, * Suspension: front springs 7.5 t, 3 leaves, * Electric window lift, * Urea tank (AdBlue): 25 liters, * Body/Superstructure: chassis for tipper, * Comfort locking system, * Fuel tank: 290 liters steel, left, * Multifunction steering wheel, * Air intake behind cab, * Air compressor 2-cylinder, Fsdoz Nbqkepfx Al Uopn * Heated air dryer, * Engine 12.8 L - 350 kW R6 Diesel (OM 471), * Engine variant OM 471, * Auxiliary drive MB 131-2c, * Frame lowering without bellows residual pressure control, * Ramp mirrors, * Waste heat recovery, * Disc brakes with full protection, * Disc brakes, front and rear axles, * Key with remote control (2), * Side marker lights, LED, flashing, * Seats in cab: passenger functional seat, * Front bumper corners in steel, * Tachograph / EC control unit, * Daytime running lights, automatic, * Truck Data Center 7 (fleet management system), * Preparation for toll collection, * Preparation for Truck Data Center (fleet management system), * Water pump regulated, * Permissible total weight 32.00 t, * Oil cooler, transmission * and more * Subject to errors, changes and prior sale.

Condition: used, mileage: 184,846 km, power: 240 kW (326.31 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 15,720 kg, maximum load weight: 10,280 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, air conditioning, cabin, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * 2 x available * Faun Variopress 522 waste collection container * Volume: 22 m³ * Zöller dumping system 2301 * Split automatic lifter Euro Delta Premium * Container sizes 80-1300 liters * Econic cab with 3 seats * Spacious cab with low entrances - ideal for frequent stopovers * Folding door on the passenger side * Right-hand drive - so that the driver does not have to get out in traffic during stops * Air conditioning * Reversing camera * Cruise control * STOPPING BRAKE * Engine brake * Turn assist system * Comfort driver's seat, air suspension * Seat heating * Electric windows * Electric mirrors * Electric sunblind * Windshield with band filter * On-board computer * Automatic transmission * Full air suspension Fsdpfjvhpraox Al Uopn * 3rd axle steering axle * Rotating beacons * Working lights * Snow chains * Hand washing system * Daytime running lights * ABS and ASR * Differential lock * Central lubrication * Wheelbase: 3,900 + 1,400 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 15,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 18,800 kg, color: orange, total length: 7,270 mm, total width: 2,550 mm, total height: 2,800 mm, loading space volume: 18 m³, Year of construction: 2017, operating hours: 1 h, UNUSED STECO CRV 2000 HD REFUSE COMPACTOR BODY – DEMONSTRATION UNIT, NEW Price: 50% of the new body's value from the manufacturer | Promotion for 2026 For sale: a professional Steco CRV 2000 HD refuse compactor body from the renowned manufacturer Kaoussis (Greece), designed for intensive use in waste collection and handling, including underground systems such as Molok. The body is physically located at our yard and is available immediately. The price includes loading with a crane. CONDITION AND ORIGIN – EXCEPTIONAL OFFER Demonstration/show body Not used in normal operating conditions Imported from Norway Used solely as an exhibition model and displayed at trade fairs Fully cleared through customs Technical and visual condition very close to new Our price is approximately 50% of the price of a new body from the manufacturer. Current promotion for the 2026 season – limited offer. TECHNICAL DATA Model: Steco CRV 2000 HD Body capacity: 18 m³ Model year: 2018 Production year: 2017 Factory/chassis number: 17061801 Certificate: CE Compliance with standard: EN 1501-1 External dimensions: Length: 727 cm Width: 255 cm Height: front: 180 cm rear: 280 cm Weight: Tare weight: 7,200 kg Payload: 18,800 kg CONSTRUCTION AND TECHNICAL SOLUTIONS Steco CRV 2000 HD is a heavy-duty body designed for long life and easy maintenance: Body with internal hydraulic cylinders Central hydraulics located at the front of the body – easy access for maintenance Rear hopper with: control system waste removal hatch Removable hopper for underground containers: made of aluminum and rubber easy assembly and disassembly by one person can be stowed under the rear flap LIFTING SYSTEMS AND CONTAINER HANDLING Container winch: locking mechanism shaking system for easier emptying Outrigger for automatically closing containers after emptying Adaptation to all available underground systems. WASHING SYSTEM – ALL-IN-ONE SOLUTION The body enables simultaneous emptying and washing of containers: System for washing containers emptied from below Reverse washing Fpsdpsz H Uggjfx Al Ujn Clean water tank: 800 l Dirty water tank: 800 l External high-pressure washer Ideal solution for municipal companies looking to save time and resources. ADDITIONAL INFORMATION The video shows the actual operation of the body with a crane. SUMMARY This is a rare opportunity to purchase a practically new, demonstration HD refuse compactor body: from a proven brand in excellent condition at a price significantly lower than new available immediately The body is ideal for municipal companies, waste management operators, and entities servicing underground systems.

Condition: used, mileage: 10 km, first registration: 07/2011, Year of construction: 2011, Selling a Hagemann HG3 waste collection body with hydraulic waste compactor suitable for all Multicars with short wheelbase and similar vehicles 2x identical available year of construction 7/2011 Type HG3 Payload 1350KG Weight 990KG Capacity 3 m3 Mounted on the original ball mount of the tipper. Fpsdpfx Asvgpfwjl Uen Good condition - ready for immediate use! Errors and modifications excepted!

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Vario Bucket / VL.112.700 / OQ65 / HARDOX / Wear plates / NEW / in stock & immediately available Price: €6,620.00 net / €7,877.80 gross - Excavators from - to: 14 tons – 25 tons - Own weight approx.: 570 kg - Capacity SAE: 700 liters - Angle of repose: 54° - Radius of the bottom of the excavation: 150 mm - Incl. wear plates - The bucket is made entirely of HARDOX. Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Round bottom Fedpfxeyhyl Ej Al Uepn - Two working openings - Rectangular working opening - V-shaped - The Vario Bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high excavation performance in towed operation. Wherever more speed and flexibility are needed to handle a wide variety of tasks, the Vario Bucket is a real asset on the construction site: It is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Simply contact us at [phone number] or [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Holp range! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Tobias Ebert for more information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Vario Bucket / VL.112.400 / MS08 / HARODX / NEW / in stock & immediately available Price: €4,270.00 net / €5,081.30 gross - Excavators from - to: 7 tons – 14 tons - Own weight approx.: 320 kg - SAE capacity: 400 liters - Angle of repose: 54° - Radius of excavation floor: 150 mm - The bucket is made entirely of HARDOX Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Rounded floor - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers a very high excavation rate in towed operation. Wherever more speed and flexibility are needed in handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: it is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] or [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Fpjdpfxoyhykze Al Ujn We supply you with the complete Holp range! Subject to errors and prior sale! = Further information = New: Yes Intended use: Construction Unladen weight: 320 kg Please contact Marius Herden for further information.

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System Fsdsqv E S Rspfx Al Ujpn The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm Fpsdpfx Ajxr Rwhol Usn

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Fpodpfxjymtfxs Al Uon Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 7,690 mm, fuel type: diesel, mast type: telescopic, power: 95 kW (129.16 HP), motor manufacturer: CHANGCHAI, gearing type: automatic, battery voltage: 12 V, overall weight: 7,300 kg, empty load weight: 7,300 kg, total length: 5,670 mm, color: yellow, Equipment: cabin, pallet forks, Gunter Grossmann Telehandler GG635 Telescopic Loader Telehandler GG635 Telehandler The GG635 is an advanced telescopic loader, engineered for intensive tasks in agriculture, construction, and logistics. It combines a robust build, a precise hydraulic system, and a powerful CHANGCHAI engine, delivering reliability, high efficiency, and optimal operating comfort under demanding conditions. CHANGCHAI 4G33TC Engine – Power and Durability The GG635 is powered by an inline, four-stroke, turbocharged, water-cooled engine – the CHANGCHAI 4G33TC – with a displacement of 3.26 liters. The engine delivers 70 kW at 2400 rpm and a maximum torque of 330 Nm at 1680 rpm, ensuring dynamic and smooth performance with low fuel consumption and long component life. Hydrostatic Drive and High-Performance Hydraulic System The hydrostatic drive via cardan shaft allows precise maneuvering in difficult terrain. The axial piston pump with sensor achieves a capacity of 175 L/min at a working pressure of 280 bar, guaranteeing fast and precise operation of attachments and maximum operational efficiency. Safety and Stability Its robust construction and operating weight of 7,300 kg ensure exceptional stability under all conditions. Wet brakes and high-quality components guarantee reliability, safety, and user comfort during heavy-duty use. Maximum lift capacity: 3,500 kg Bucket capacity: 0.9 m³ Fork length: 1,200 mm Operating weight: 7,300 kg Manufacturer: CHANGCHAI Model: 4G33TC Type: Inline, water-cooled, turbocharged, four-stroke Rated power / speed: 70 kW / 2,400 rpm Max torque / speed: 330 Nm / 1,680 rpm Displacement: 3.26 L Dimensions: 715 × 660 × 795 mm Brand/Model: XCMG WA1102 / WA2102 Static axle load: 18 T Brakes: Wet brake Maximum output torque (N·m): 2,600 Brand/Model: XCMG TM043II Rated input power: 97 kW Maximum input torque: 800 Nm Maximum input speed: 3,500 rpm Fedpfxoynb H Te Al Ujpn Drive: Hydrostatic, via cardan shaft Speed: 0–11 / 35 km/h Working pump: Axial piston pump with sensor Capacity: 175 L/min Pressure: 280 bar Fuel tank: 120 L Hydraulic oil tank: 180 L A Total length with standard bucket: 5,670 mm A Total length with pallet forks: 6,030 mm B Total length without attachment: 4,650 mm D Wheelbase: 3,005 mm F Height to top of cab: 2,373 mm J Overall working height with bucket: 7,690 mm K Maximum bucket hinge pin height: 7,000 mm L Dumping height, bucket (telescopic extended): 6,750 mm L Dumping height, forks (telescopic extended): 6,900 mm L1 Dumping height, bucket (telescopic retracted): 4,450 mm L1 Dumping height, forks (telescopic retracted): 4,610 mm M Maximum turning height (telescopic extended): 6,250 mm M1 Maximum turning height (telescopic retracted): 4,000 mm N Reach, bucket (telescopic retracted): 590 mm N1 Reach, forks (telescopic extended): 3,570 mm N2 Reach, forks (telescopic retracted): 1,020 mm O Digging depth: 29 mm P Overall height: 2,320 mm Q Track width: 2,000 mm S Ground clearance: 360 mm T Maximum turning radius with bucket: 5,571 mm T1 Maximum working radius with forks: 4,258 mm U Outside turning radius: 4,829 mm V Inner turning radius: 2,204 mm

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 1,550 mm, type of input current: three-phase, input voltage: 400 V, We offer a rotary die-cutting machine, HMB Rotary Die-Cutter 1.5, which has seen little use, manufactured in 2005. For sale, we have a fully functional, Polish-made rotary die-cutting machine for corrugated cardboard. This machine is made by the renowned manufacturer HMB Mikołów, model 1.55. The machine is designed for the fast and precise cutting of shaped, flap, and grid-patterned packaging, as well as dividers, from corrugated cardboard using rotary dies. Technical specifications: • Manufacturer: HMB Zakład Mechaniczny Mikołów • Type / Model: ROTARY DIE-CUTTER 1.55 • Year of manufacture: 2005 • Working width: 1550 mm (1.55 m) • Certificate: CE • Power supply: 400 V Fsdpfxoz Iwp Hs Al Uopn Equipment and advantages: • Cleaning section (brush): Integrated shafts with brushes effectively remove cardboard waste immediately after die-cutting. • Take-off table: Includes the grid-patterned table shown in the pictures for collecting the finished cut sheets. • Polish design: Very durable construction, simple adjustment, and easy access to spare parts from the manufacturer in Mikołów. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Fsdpfxoy Efcus Al Uspn Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Fpedpfx Aezh Hw Asl Uon Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), briquetting press, shredder, piping for all machines, various pipe diameters. Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, wheelbase: 4,400 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, gearing type: mechanical, emission class: euro5, loading space volume: 8 m³, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, electric window regulation, electronic stability program (ESP), power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Power windows front - Reverse camera - Sun visor = Remarks = Engels Mercedes-Benz Accelo 815 4x2 Garbage Compactor | 150 HP | Euro 5 The Mercedes-Benz Accelo 815 4x2 Garbage Compactor is built for municipal and commercial waste collection. Its compact 4x2 chassis, 150 HP diesel engine and Damaeq Compact rear-loader body provide a solution for narrow streets and daily collection routes. Key Highlights - Mercedes-Benz Accelo 815 4x2 Fpsdpey Rt T Eofx Al Uon - 4.8-litre Euro 5 diesel engine - 150 HP (110 kW) / 580 Nm - Eaton FSO-4505-A manual transmission - Approx. 8,000 kg gross vehicle weight - Damaeq Compact rear-loader body - 8 yd³ / approx. 6.1 m³ capacity - 1.2 m³ rear loading hopper - Smartpack compression system - 100-litre hydraulic reservoir - 100-litre slurry / leachate tank - Heavy-duty ASTM A36 steel construction - Rear monitoring camera - Emergency stop system Built for Urban Waste Collection The Accelo 815 combines compact dimensions with a hydraulic refuse compactor. Its manoeuvrable 4x2 chassis supports operation in residential neighbourhoods, city centres, narrow streets and commercial areas where larger refuse trucks may be difficult to use. The Damaeq Compact body uses hydraulic compaction and Smartpack load compression to improve storage efficiency. The 1.2 m³ rear hopper supports collection cycles, while the slurry tank, rear camera and emergency-stop system support waste operations. Applications - Municipal waste collection - Residential refuse collection - Commercial waste collection - Urban sanitation services - City-centre collection routes Technical Specifications Vehicle: Mercedes-Benz Accelo 815 Body: Damaeq Compact garbage compactor Drive: 4x2 Engine: 4.8L Euro 5 diesel Power: 150 HP / 110 kW Torque: 580 Nm Transmission: Eaton FSO-4505-A manual GVW: Approx. 8,000 kg Body capacity: 8 yd³ / approx. 6.1 m³ Loading hopper: 1.2 m³ Hydraulic reservoir: 100 litres Slurry tank: 100 litres Cab: Day cab Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. = More information = Year of manufacture: 2024 Number of cylinders: 4 Engine capacity: 4.200 cc GVW: 8.000 kg Availability: in stock Body model: Compact 06

Condition: excellent (used), Year of construction: 2012, Industrial wastewater flows into the reactor and is mixed with granulated anaerobic biomass in a distribution system. Organic compounds are converted into methane (biogas). Biogas is collected in the lower phase separator, creating a "gas lift." Along with the biogas, the liquid flows upwards through a riser pipe. The biogas exits the reactor in the liquid/gas separator. The water returns through a downcomer pipe to the distribution system, hence the name: internal cycle. The wastewater is treated in a second, upper chamber. Biogas from the second chamber is collected in the upper phase separator. The treated wastewater leaves the reactor, and the biogas is extracted from the reactor. Fpjdpfx Aez Nc Azsl Usn The reactor was used in a dairy processing company and has not yet been dismantled.

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Fpjdpoz Nc Nnofx Al Ujn Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed