Conveyour buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Conveyor with air separator, on steel frame mounted, conveyor length 6,50m; width 1,20m, good condition L87i2mf2 more
1
Swarf conveyor belt from BJ. 2007 32f0dl2f3 for the removal of cutting and cutting waste in container capacity measure band width 27 cm Pumping height upper edge of bulk length of approx. 170 cm below approx. 150 cm total length 3, 20 m more
3
1 unit sawdust and chip conveyor 650/500 mm (B/T) Laenge 38 m Pvm7etdbz more
3
PwjgrhgyxConveyor road about 1.5 km long, 45cm width troughed, several sections, galvanized, partially covered, with all task Transfer, discharge, screening COMPLETE, selling individual band sections are possible. more
2
Conveyor Horstmann, belt length from deflection, to deflection drum 13,7m width: 1.25m. Flat belt with short studs. Another sizes after request. Kdp7ynup more
6
Turning length / turning length: 1,000 mm Maximum circulation of bed / maximum diameter over bed: 330 / 310 mm Maximum machining diameter longitudinal / Max workpiecediameter lengthways: 250 mm Power operated chucks / chuck clamping: 3 NHF - 250-65 Clamping cylinder / clamping cylinder: OK RJ - 120 Tool system: Cylindrical shank with shots / Cylindershaft with holder: DIN 69 880: ø 40 mm, 12 pcs. It powered / driven tools: 6 Tailstock / tailstock: Quill type ø / sleeve diameter: 90 ... more
6
Manufacturer: Cefla Rotorstain, Type: Rotor, Year: 2005, Control: Cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, work piece detection: yes, Conveyour system: Band, Spraying stations: 16, Schnellwechselsystem : yes, Gun carrier: 16, Pumps: 2, Laquer system - airless: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Feeding speed m/min: 2,5-10, Year :2005 Gi7vhi... more
6
Panel sizing saw Brand: Schelling Type: FL430 / 1010 Year: 2000 Technical data: Saw blade Ø: 480mm Scoring saw blade Ø: 200mm Saw blade overhang: 143mm Clamping claw opening: 135mm max. package height: 128mm min. package height: 15mm Motor main saw: 19 kW Speed saw unit: work flow up to 120m/min. return flow 120m/min Infeeding speed: flow: 1-25m/min. return flow: 1-80 m/min. Suction supply: Lengthwise saw: 1x Ø150mm 2x Ø120mm Working height: 970mm Installation height: 2675 mm H2k2osd ... more
x-travel:630 mm y-travel:500 mm z-travel:560 mm table surface area:400 x 500 mm turning speed range:45 - 6000 U/min feed range:1 - 30000 mm/min rapid travel range:12 m/min no. of workpieces in the magazine:52 Stück table load:300 kp numbers of pallets:2-fach electrics - voltage/frequency:380/50 V/Hz total power requirement:30 kW L8qtd weight of the machine ca.:7500 kgs dimensions of the machine ca.:4,5 x 2,5 x 2,65 m Horizontal Machining Center Heller Model MCP150, UNIPRO 90 Control in good ... more
6
Used Mazak Variax 500, complete with 2 pallets. CNC Mazatrol 640 R Eaiazx0i0 Movement: X-travel: 510 mm Y-travel: 510 mm Z-travel: 460 mm Speed range: 12000 Ump/min Tool magazine: 40 Spindlekonus: BT 40 Complete with coolingwater system, filter and Chip Conveyour The machine can be seen in operation by appointment. Instant delivery more


conveyour
every day

New machines via email!

Be informed!
6
Year of manufacture 2005 Cutting length mm 4300 Saw blade projection 95 mm Main motor power kW 13.5 Lifting table with rolley conveyour C2y0k0g8 HOLZMA 2-fingered grippers 2 microinfeeds Label Printer CE On Produktion We offer instalation by customer rok produkcji 2005 wysokosc ciecia 95 mm dlugosc ciecia 4200 mm winda z napedzanymi rolkami podwojne chwytaki Holzma 2 mikroposuwaki do cienkich plyt drukarka motor pily glownej 13.5 kw CE na produkcji obecnie swiadczymy uslugi ur... more
6
Two shaft preshredder TPA SPH 2000 on the trailer, blade width 75mm, 2 x 75kw, electric engine with generator, conveyour belt, cutting chamber 2000 x 2400mm, GOOD PRICE !!! Bxxpdqmq more
6
Manufacturer: Cefla, Type: Beizlinie, Year: 2005, Work piece width min-max mm: 100 - 1300, Min.-max. workpiece length in mm: 3 - 80, Min.-max. workpiece height in mm: 300 - 2010, Working widht max mm: 5, Working width min min mm: yes, Apstapelanlage Typ: no, Cycle rate: yes, Type of stacking system: Bürste D2/1300-15, Conveyour system: yes, Fast exchange system spray gun carrier: Rotostain RT 10, Laquer circles: yes, Laquer system - airless: VS/26-2C, Laquer system - airmix: brush sander, Water ... more
4
Conveyors/conveyours a chaine 200 m³/h or 130 t / h RAL 1015Laenge 30 300 mm with additional parts can be extended to 44 000mmLongeur 30 300 mm, possibilité de ralonge a 44 000 mm (inclus dans le prix) price from factory F-43220 Dunières Prix depart Usine F-43220 Dunieres6000€ good condition Bon EtatKratzfoerderer/Conveyours galvanized 25 m³/h or 16 t/h GalvaniseLaenge 16 000 mm with additional share can be extended to 30 000 mm (parts included in price) Bendings 16 000 mm , possibilité de ralon... more
4
Luescher Xpose 230 UV CtP-system with PHS, Tiff-Shooter and Plateprocessor for imaging of conventional UV offset printing plates age 1-2009 - max. plate size min 430x360mm, max 1130x950 Cpxsc - plate thickness 0.20 - 0.4 mm - 128 UV-laser diodes 405nm - speed approx 27 Plates per Hour - automatic plate handling system PHS with 4 cassette insertion slots an for pallets with 600 plates includet paper - internal autoplatepunch and 780mm - deloader conveyour - Plateprocessor more
6
Used well maintained Mazak FH 6000 horizontal machining center MAZATROL Matrix CNC. Year 2008 Movement: X-travel: 800 mm Y-travel: 800 mm Z-travel: 800 mm Clamping surface: 500 x 500 mm Number of pallets: 2 9jbdknp7i Speed range: 7000 ump/min. Spindlekonus: Cat 50 Tools magazine: 40 Spindle motor power: 30 kW Complete with CROMAR Chip Conveyour. more
6
Resaw line with double bandsaw Gullangets Cross conveyoyr for packs Tilt hoist Stick handling ( belt conveyor, elevator, castes for sticks) Cross conveyours Infeed to band saws Dandsaw Gullangets BKGG 1100 7wpv7togd Outfeed roll conveyors more
2
Man.year: 2006 Condition: Good, working This is high perfomance injector suitable for meat, poultry and also for fish. Capacity: Up to 15 t\h depending on product & injection level Needle bridge stroke: 30-45-60 mm per needle stroke Quantity of needles: 2 x 112 Quadro-needle, 3mm Needle-spring: 1,5 mm Transport system width: 950 mm Stroke height: 150 mm Max. product hight: 120 mm Ibi9wqij Drive unit for needle bridge: 2 x 4 kW Power consumption Conveyours: 1,7kW Pump power consumpti... more
3
Manufacturer: Cefla, Type: ROC 2, Year: 1994, Work piece width min-max mm: 1300, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2 x 2, Farbkreise: 2, Schnellwechselsystem : yes, Laquer recharging: yes, Transportsystem Band: yes, Year :1994 Lr9vd more
6
THROUGH FEED PRESS - ORMA 3500x1400 No. 2 SOLID STEEL DRILLED PLATENS 3500x1400 MM O3ik7iw8d No.8 CYLINDERS 85 MM EACH TOTAL VERTICAL PRESSURE 150 TONS BELT LOADING DEVICE DISC CONVEYOUR UNLOADING DEVICE more
6
AKROS HENSCHEL SHEAR BALER 1300/100 EP, shear force 1300t, electric engine 6 X 90 Kw, box lenght 8000mm, feeding system, operator cabin, crane with grab, conveyour belt, total weight 290t. FIRST OWNER, EXCELLENT CONDITION !!! Molrt more
5
Used well maintained Mazak FH 5800 horizontal machining center MAZATROL Fusion 640 M CNC. Cooling through spindle. Movement: X-travel: 710 mm Y-travel: 610 mm Z-travel: 760 mm Clamping surface: 500 x 500 mm Number of pallets: 2 Speed range: 1-12.000 ump/min. Spindlekonus: BT 40 Indexable tension table: 0,001 degree Tools magazine: 80 positions M0erb Accessories: MAYFRAM Chip Conveyour Manuals more
6
Log deck Step feeder Log haul Infeed to reducer Soderhamn Reducer Soderhamn Eriksson Outfeed Log turner Infeed to reducer Reducer Soderhamn Eriksson Roll conveyour Multi blade saw MS-Machinenbau-Vertriebs GmbH New cutting height 200 mm width 400 mm Roll conveyer Elevator Stacker Electic boxes New 7g8zzhrc2 Belt conveyers for chipps New more
3
Lenght 15 m Width 1,5-5 m Height to floor 4 m 3ugyolfbo Without floor panel and conveyour Dismounted more
6
Manufacturer: Cattinar Rotoclean, Type: Durchlauflackieranlage, Year: 2001/1985, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 250-4500, Min.-max. workpiece height in mm: 8-60, Spraying line: yes, Spraying heads - total: 8, work piece cleaning: yes, work piece detection: yes, Conveyour system: stahlband, Spraying stations: 1, Fast exchange system spray gun carrier: no, Laquer circles: 2, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Brushing ... more
6
WEMHONER Press Lr7jz • PRESS WEMHONER DA 2200 X 4000 WITH AUTOMATIC FEEDING ON BELT CONVEYOUR • PRESS FROM BELOW • STEEL WORKING PLAN • PRESS WITH 8 PISTONS • PISTON DIAMETER 130/140MM • PRESS POWER: 5/6KG PER SQUARE CENTIMETER • WORKING HEIGHT 190MM • ELECTRIC PLANT IS NEW • MACHINE IS FULLY OVERHAULED more
6
Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, [...] kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: ... more
5
Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Yea... more
3
Manufacturer: Venyeskob, Type: HGS, Year: 1983, Control: automatisch, Spraying heads - total: 4, Working width mm: 800, work piece cleaning: yes, work piece detection: yes, Conveyour system: Stahlband, Spraying stations: 1, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Water cleaning: yes, Dry exhauster: yes, Wight approx. kg: 2000, Year :1983 Szd82wpb more
1
Manufacturer: Venyeskob, Type: HGS DUO/Z, Year: 1995, Control: Programm, Spraying heads - total: 8, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Laquer circles: 2, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, wast cleaning: yes, Feeding speed m/min: 2,5-7,5, Electrical power consumption kW: 30, Wight approx. kg: 6000, Year :1995 Lkj79 more
3
Manufacturer: Venyeskob, Type: HGS Single / Z, Year: 1996, Control: PC, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: no, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 2, Laquer system - airless: yes, Laquer recharging: yes, by scraper: yes, Dry exhauster: yes, Feeding speed m/min: 2,5 - 7,5, Year :1996 Q8vet392y more
6
Manufacturer: Venyeskob Heesemann Spritzstrasse, Year: 2000, Work piece width min-max mm: 100-1600, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 8-60, Spraying line: yes, Spraying heads - total: 4, Working width mm: 1300, work piece cleaning: yes, work piece detection: yes, Conveyour system: yes, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 2, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Water cleaning: no, ... more
6
Manufacturer: Cefla Spritzmaschine, Type: Mito, Year: 2014, Control: cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1350, Spraying heads - total: 4, work piece cleaning: no, work piece detection: yes, Conveyour system: Papier und Band, gesteuerte Achsen: 1, Spraying stations: 1, Colour circuits: 2, Schnellwechselsystem : yes, Gun carrier: 1, Pumps: 2 X Kremln, Laquer system - airmix: yes, Laquer r... more
5
Manufacturer: Venyeskob, Type: Coolac, Year: 2006, Work piece width min-max mm: ca 300, Working width mm: ca 300, Conveyour system: Rolle, Year :2006 93u0wbr9s more
5
Manufacturer: Kuper Folienschrumpfanlage, Type: KFE 800, Year: 1989, Control: Kuper, Feeding belt mm: 1 X 3000 +1X 3100, Foil wrapping machine mm: yes, Foil stations: 1, Welding frame dimensions mm: 950, Intermediate transport mm: 2500, Shrinking tunnel mm: ca.3000, Outlet conveyor mm: 1 X 3500, Schrumpftunnel kW Leistung: ca.45, Heating: Elektro, Foil 1 width mm: 950, Through running hight mm: ca.500, Working width mm: 800, Lifting krane: yes, Conveyour system: Band/Stange, FREE TEXT: inkl Ausl... more
6
Manufacturer: Giardina Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water:... more
6
Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009 Demma7cw8 more
6
Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer rechargi... more
6
Manufacturer: Kuper, Type: ST / L 1400, Year: 1982, Control: Kuper, Feeding belt mm: yes, Foil wrapping machine mm: yes, Foil stations: 2, Welding frame dimensions mm: 1450, Intermediate transport mm: 2500, Shrinking tunnel mm: 3500, Schrumpftunnel kW Leistung: 53, Heating: elektrisch, Total connection value in kW: 60, Foil 1 width mm: 1500, Through running hight mm: 580, Working width mm: 1380, Lifting krane: yes, Conveyour system: Band, FREE TEXT: Auslaufstangentransport, FREE TEXT: Auslaufsta... more
6
Manufacturer: Venyeskob Spritzmaschine, Year: 2002, Control: cnc, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 6-60, Spraying heads - total: ohne Sprühköpfe, Working width mm: 1450, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, gesteuerte Achsen: 1, Stainless steel design: no, Colour circuits: 2, Gun carrier: 1 Arm, Pumps: keine, Laquer recharging: yes, by rollers: yes, by scraper: über Band, Dry exh... more
6
Manufacturer: Venyeskob , Type: LT, Year: 1998, Control: Venyeskob, Min.-max. workpiece length in mm: 600 - 2500, Min.-max. workpiece height in mm: 100, Working widht max mm: 10 - 250, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Band/Rolle, Pumpenhersteller: Böhlhoff, Laquer circles: 1, Dry exhauster: yes, Feeding belt mm: yes, Bürstenstation: 3, kantenbürsten Stk: 2, Flächenbürste: 1, Länge mm Bürstenststation: 4000, Feeding speed m/min: 10-60, Electrical power consu... more
6
Manufacturer: Wirth, Year: 2011, Control: Wirth, Work piece width min-max mm: 400, Min.-max. workpiece height in mm: 100, Roller coater line: yes, Conveyour system: Band, Laquer roller coaters (number): 1, Expellers qty.: yes 1 x rund + 2 x Teller, UV dryers - 1 lamp (number): 100 / 180 / 260 W, Year :2011 2meh82job more
6
Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007 2brfjly more
3
Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous ad... more
4
Manufacturer: Superfici mit Hochtrockner, Type: Twinspray, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: Rakel, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 5, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, Dry exhauster: yes, Brushing machine: Fladder 1300, Belt conveyors (number): 2, High dryers (number): 24/5500... more
6
Manufacturer: Venyeskob, Type: Leistenspritzmaschine, Year: 1991, Control: Programm, Work piece width min-max mm: 10-300, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 8-60, Working widht max mm: 300, Spraying heads - total: 4, work piece cleaning: no, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 1, Laquer circles: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm... more
6
Manufacturer: Spritzstrasse Giradina, Type: Frontenlackieranlage, Year: 2005, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 5-60, Work piece length min-max mm: 100, Geamtlänge Meter: ca.30, Feeding speed m/min: 2,5-5, UV-Strasse: yes, Wasserlackstrasse: yes, Conveyor belts: 2, Schleifmaschinen: kein, Enstaubungsmaschinen: 1, Spraying machine: 1, UV dryer: yes, Anzahl Lampen: 3, Jet drier: 1 MOS Trockner1 Düsentrockner, Outlet conveyor: yes, wast cleaning: yes, work piece det... more
6
Jn3qzwk9Drum screen Komptech MAXX, built in 2007, Perkins diese, 2x 5m conveyours, 40mm drum, magnet on the rear conveyour more
1
Condition: Excellent Working table with conveyours suitable for fish processing plants. Dimensions of conveyours: Working table with conveyors: length 7000 mm, width 1500 mm. Bkw7xpx Iron-band conveyor: lengt 5000 mm, width 600 mm Curve conveyor: length 1100 mm, width 500 mm Conveyor: lengt 3500 mm, width 60 mm Conveyor: lengt 9000 mm, width 600 mm more


conveyour
every day

New machines via email!

Be informed!

to

to

Change search
CONVEYOUR
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close