Used Cooling Lubricant Plant for sale (13,269)

Condition: good (used), Year of construction: 2023, operating hours: 60 h, functionality: unexamined, Equipment: Methor "hook lift" basic package - 24 V electric control - maintenance-friendly engine compartment with LED light - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning Dsdpfjvrw Tmox Ah Uscp - paintwork: RAL 2011 deep orange Additional equipment: Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 Djdpexu Dipofx Ah Uocp • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Dedpjxt Uvqefx Ah Uecp

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, warranty duration: 6 months, usable tank capacity: 500 l, water connection: 3 mm, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 500 l, total width: 1,100 mm, total length: 1,175 mm, total height: 1,520 mm, Sourdough Machine Fermenter Isernhäger Model: B 500 ECO 500 liters Display control Stainless steel design with castors Agitator with pump Simple control Connection 400V, 16A CEE plug Used machine with warranty Options: Service package Dcodpfxsxbm Tdj Ah Usp Maintenance contract Commissioning & operator training Delivery service We have many more bakery machines in stock!

Condition: good (used), Year of construction: 1994, machine/vehicle number: 027/103, This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm Dcsdpjrgqnrefx Ah Usp - Year of construction: 1994

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21675 Description:Powerscreen screening plant from the 1980s.Starts and runs well – new battery installed.Conveyor belts are showing some wear.Can be delivered on short notice. Own weight: 1 Model: sorteringsverk Dcsdpfx Ahoxrabpo Uop

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Djdpfx Ajxvc Rzeh Uecp Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Dcedpfoxa Dqdox Ah Uop Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: new, Year of construction: 2025, one machine ready produced Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Dcjdpfogbkkrex Ah Ujp Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 990 mm, total height: 1,595 mm, DGUV certified until: 12/2027, overall weight: 258 kg, empty load weight: 258 kg, input frequency: 50 Hz, Baguette – Long Roller Sinmag Model: SM2-380 Baguetto Capacity: min. 50 – max. 1200 g depending on dough hydration with felt belts for soft doughs Rolling width: up to max. 750 mm Extendable stainless steel discharge plate Only with us: DGUV V3 safety inspection Connection: 400V, 550 Watt, 16A-CEE plug Dimensions: 995 x 690 x 1595/1650 mm (W x D x H) Feed height: 1480 mm Weight: 258 kg NEW machine – SAB inspected 24 months warranty + service Option: Leasing & rental service Maintenance contract E-Box Service package Mobile base frame Djdpfouytxrex Ah Uocp Guide for sandwich loaf Delivery service Commissioning & operator training More bakery machines in stock!

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Function: Dcodjxrnvuopfx Ah Usp A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine.

Condition: used, Year of construction: 2018, Manufacturer: COTEC, Serial No. 8918040020, control: Beckhoff, touch panel operation, manual glass loading, working area approx. Ø 600 x 500 mm, drying, workpiece automation, safety devices, control and switch cabinets Dedpjxg Hu Eefx Ah Uocp

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Dcedpfx Aoxvc N Djh Usp Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), Year of construction: 2018, functionality: fully functional, Sandblasting Cabinet Type STK 690 M Year: 2018 Technical Data Manufacturer: Made in Europe Model: STK 690 M Year of manufacture: 2018 Volume with floor: 500 L Volume without floor and bridge: 690 L Power consumption extraction unit: 1300 Watts Load capacity: 225 kg Dimensions: approx. L 1.2 x W 1.1 x H 1.8 m Weight: approx. 110 kg Dedpjxrzf Aefx Ah Uscp Features - 690 L total volume - Integrated extraction system - Internal cabin dimensions: H 600 x W 1170 x D 760 mm - Air requirement: 400 to 700 liters/min, 15-25 cfm - Working pressure: 3.4 to 5.5 bar, 40-80 psi - Max. allowable pressure: 8.5 bar, 125 psi - Extraction capacity: 3.6 m³/min All information subject to change without notice. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Complete AMMANN asphalt mixing plant. The ERMIIS automation was installed in 2013, replacing the original AMMANN automation. Capacity: 160 tons/hour. The plant is operational until January 2026. Dodjxqpvtopfx Ah Ujcp

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, Sourdough – Rapid Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 – 100 kg total rye flour with timer Stainless steel construction Connection: 400V, 16A CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Dcsdpfxjvdkt Re Ah Uop Options: Delivery service Maintenance contract Service package Instruction & commissioning Many more bakery machines in stock!

Condition: used, Year of construction: 2021, operating hours: 4,826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Dcsdpfx Ahjvnmldo Uep Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Dedpshqhw Iefx Ah Uecp Retentat flow: 1200 l/h

Condition: used, Bleach & Fabric Softener Raw Material Intake & Production Plant Dsdpfx Asxr Am Ish Uocp 132,000 tonnes per year maximum bleach production capacity 27,000 tonnes per year maximum fabric softener production capacity Raw material reception & tank farm storage 36x Carlier and FIPP 50m3 composite vertical silos 150m3 sodium hypochlorite composite vertical silo Alliance Inox Industrie 49,500L stainless steel vertical silo Including pumps, pipework, instrumentation, hot water, softened water tanks and water treatment plant Product mixing facility Sirech Hostier 1,600L stainless steel premixing tank 3x Alfa Laval 11,500L stainless steel vertical mixing tanks 3x Alliance Inox Industrie 25,000L stainless steel vertical product holding tanks 6x Barriquand plate heat exchangers Pumps, pipework, manifolds & instrumentation throughout Chilled water system with CIAT chiller, chilled water tank & Barriquand plate heat exchanger Thick bleach production system including 2x composite tanks

Condition: used, Year of construction: 1970, sheet width 170 mm plate thickness 0 mm number of rolls 0 weight of the machine ca. 0,1 t +++++ Please note: Djdpfxjd N Spme Ah Uscp The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Double-deck horizontal screen Type: B-256-T Screen area: 1,300 x 4,000 mm Dedpfx Ajxrnrioh Ujcp with base frame, springs, and spring supports

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 2,300 mm, total length: 750 mm, total height: 1,380 mm, DGUV certified until: 12/2026, year of last overhaul: 2025, Lippelt Rumo Seed Station Lippelt Model Rumo 6 Single-sided and double-sided humidification in water bath Single or double-sided seeding possible Robust technology Stainless steel construction, mobile Connection: 400V, 16A CEE plug Dimensions: L 2300 x W 750 x H 1370 mm Used machine, cleaned With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Seed disc Maintenance contract Delivery service Dcedpfxsw Ttl Ss Ah Uop E-Box for increased safety Instruction & commissioning More bakery machinery in stock!

Year of construction: 2024, operating hours: 100 h, condition: used, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19395 Specifications: - 2024 model - Hours: approx. 100 - Weight: 14,860 kg Dcedpfx Aevgx Iush Ujp - Good lines - Comes with extra cloths - Undercarriage (see pictures) - Watch video - Ready for delivery Description: 2024 Portafill MR-5 sights with extra cloths. The cloths have a value of NOK 20,000. Only 75 hours. Ready for delivery. Hours: 100 Own weight: 14860 Total Weight: 14860 Model: MR-5 Sikteverk m/ ekstra duker

Condition: good (used), Small sandblasting system Dcsdpfx Ajxr Az Eoh Uep Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures)

Condition: used, Year of construction: 1991, Year 1991 max. load 450 gut +++++ Please note: Dcsdpfx Ahehy T Nko Ujp The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++