Used Central Lubrication System for sale (44,861)

Condition: new, SKF MKU2-KW6-22003+428 – central oil lubrication unit Codpfxjz Alyfo Aktori Original unit from SKF / SKF Lubrication Systems Germany GmbH, designed for central oil lubrication systems. Unused unit – warehouse stock. It has not been used in an installation. Only minor storage marks are visible on the housing and tank. TECHNICAL DATA: • Manufacturer: SKF Lubrication Systems Germany GmbH • Model: MKU2-KW6-22003+428 • Type: unit / gear pump for central lubrication • Power supply: 230 V AC • Frequency: 50/60 Hz • Output: 0.2 l/min • Tank capacity: 6 liters • Tank: plastic • Medium: oil • Maximum operating pressure: 30 bar • Connection: G 1/4" • Number of outlets: 2 • Pressure gauge: YES • Pressure switch: YES • Level control: YES • Control: integrated • Protection class: IP54 • Operating temperature: +10 to +40°C • Oil viscosity range: 20–1500 mm²/s • Year of manufacture shown on the nameplate: 35/17 On the nameplate: SKF Lubrication Systems Germany GmbH MKU2-KW6-22003+428 230 V, 50/60 Hz IEC38 Made in Czech Republic The unit is complete, in the condition shown in the pictures. Condition: NEW / UNUSED – WAREHOUSE STOCK. Sold exactly in the condition and configuration shown in the pictures.

Condition: used, Motan Central Drying & Vacuum Conveying System – LUXOR A 400-E + 4x LUXORBIN + Blowerstation + 2x F30 Filters This energy-efficient set includes a 400 Dry Air Generator with ETA plus® technology , 4 insulated drying bins with a total capacity of 800 liters , a 4.3 kW central vacuum blower station , and 2 central dust filters. System Components & Technical Specifications: 1\. Dry Air Generator (Trockenlufterzeuger) 1. Manufacturer: Motan Holding GmbH (Germany) 2. Model: LUXOR A 400-E (with ETA plus® energy saving unit) 3. Year of Manufacture: 2017 4. Serial Number: 768T0016259A1700151 5. Dry Air Flow Rate: 400 6. Power Supply: 400 V / 50 Hz (3PE), 27 A 7. Backup Fuse: 35 A 8. Weight: 520 kg 2\. Drying Bins (Trockentrichter) – 4 Units (Total 800 L): 1. 2x Motan LUXORBIN A 150-L 2. Year of Manufacture: 2019 3. Capacity: 150 liters each 4. Voltage: 230 V / 50-60 Hz 5. Weight: 135 kg each 6. 2x Motan LUXORBIN A 250-L 7. Year of Manufacture: 2016 8. Capacity: 250 liters each 9. Voltage: 230 V / 50-60 Hz 10. Weight: 185 kg each 3\. Central Vacuum Blower Station (Blowerstation) 1. Manufacturer: Motan Holding GmbH 2. Model: Blowerstation CAN 4.3 kW 3. Year of Manufacture: 2019 4. Serial Number: CS02B343G6418194A1905805 5. Power Rating: 4.3 kW 6. Voltage: 400/480 V, 50/60 Hz (3PE), 10/10.4 A 7. Weight: 175 kg 4\. Central Dust Filters (Zentralfilter) – 2 Units: 1. 2x Motan Zentralfilter F30 2. Years of Manufacture: 2018 & 2016 3. Control Voltage: 24 V DC Crjdpfez Rvfaex Aktei 4. Compressed Air Supply: 5–7 bar (pneumatic filter cleaning) 5. Weight: 25 kg each

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond. Credpfezlh Ausx Aktoi

Condition: used, Year of construction: 2015, functionality: fully functional, KNOLL Chip Removal Central System with Pump Technology 25,000 Liters Systems with Pump Technology A conveying and filtering system with pump technology is suitable for the fully automatic transport of chips from several machining centers to a central filtration unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the options to freely arrange and rearrange their machine park. The maintenance and care effort is low. Codpfxsz D Uz Ss Aktori Areas of Application The closed-loop system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an isolated solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park • Low space requirement due to above-ground pipelines • No system components within the floor of the hall • Low maintenance and care effort Main Components • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return line piping • Chip pre-separator (optional) • Dirty and/or clean tank • Coolant filter system (e.g., band filter or backwash filter) • Supply pump(s) • Supply line piping • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central welding fume extraction Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62185 Year of manufacture: 2014 Nominal volumetric flow rate 3000 m³/h Nominal volumetric flow rate 50 m³/sec. Filter area 27 m² (9 units, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Power connection 400 Volt, 50 Hz. Crjdpfsz Db Niox Aktoi - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control system - Control cabinet fixed to the extraction system - 9 filter cartridges, type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter change - Radial fan installed at the top inside, type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Fire water connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: good (used), Central lubrication, oil circulation system, inlet pump, central lubrication unit -Manufacturer: Showa, central lubrication unit from Matsuura MC 710V milling machine -Type: YMAS-3 -Container capacity: 2 liters Crjdogxqt Ujpfx Aktsi -Dimensions: 110/220/H250 mm -Weight: 4.2 kg

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, progressive pump, central lubrication pump -Handover: in its current condition as inspected -Device condition: not functioning, control board missing -Manufacturer: Lincoln, Quicklub central lubrication pump -Type: 645-41110-1 -Voltage: 100-240 V -Power: 60 watts -P max: 240 bar Csdpfx Ashv Ilwsktjri -Dimensions: 270/240/H570 mm -Weight: 15.5 kg

Condition: used, Year of construction: 2014, functionality: fully functional, KNOLL Central system with pump technology The system was used for cooling magnesium machining processes. Systems with pump technology A conveying and filtering system with pump technology is suitable for the fully automatic chip transport from several machining centers to a central filter unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the possibilities to freely arrange and rearrange their machine park. The maintenance and servicing effort is low. Applications The circulation system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an independent solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park • Low space requirement due to overhead pipework • No system components within the floor of the hall • Low maintenance and servicing effort Main components Cedpfjz D U Edjx Akteri • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return pipework • Preliminary chip separator (optional) • Dirty and/or clean tank • Coolant filter system (e.g. belt filter or backwash filter) • Supply pump(s) • Supply pipework • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approximately 250 L/min at approximately 3.5 bar water pressure Overflow to the filter system is provided on-site, air and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min Cedpfx Aszwccmekteri Recirculation from the clean tank to the dirty tank: 100-350 L/min Machine supply: max. 250 L/min Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approximately 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approximately 5.14 m3 Maximum operating volume: approximately 4.58 m3 Minimum operating volume: approximately 3.60 m3 Process sequence: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding swarf, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper scraper section. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approximately 5.14 m3 Maximum volume: approximately 4.58 m3 Length: approximately 4,000 mm, including 70 mm stiffening Width: approximately 1,890 mm, including 140 mm stiffening Height: approximately 1,105 mm, including 100 mm bottom profile Neck height: approximately 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Maximum volume: approximately 0.55 m3 41126ä

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump Csdoztpq Aspfx Aktjri -Type: unfortunately no exact designation -Item No.: 122 Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Csdpfxozhv Rls Akteri Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic Credpoy N Duqefx Aktji - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm Cjdpfxj Ah Tlro Aktsri • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)

Condition: good (used), Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit, central lubrication, lubrication pump -Hydraulic unit: Central lubrication on mobile base frame -Hydraulic unit: AEG 0.25 kW 1430 rpm -Tank: with level indicator -Control: Schleicher Codjt Hmi Njpfx Akteri -Individual components: see photos -Number: 3x lubrication unit available -Price per piece -Dimensions: 640/370/H720mm -Weight: 56 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Central plant Knoll Central plant for shavings / cutting fluid. Can handle up to 10 machines at a time. Parts of the plant: Knoll FKA / 1820 Knoll AE 1114.800 Knoll VRF / 900 Cedpfx Astltcrsktjri Dimensions approx: 400x400x330 cm

Condition: used, Central lubrication, oil circulation system, progressive pump Crjdsc Rx Swjpfx Aktoi -Contents: 7 l -Drive: 0.45 kW -Sample container -Number: 1x pumps available -Price: per piece -Dimensions: 500/230/H450 mm -Weight: 19 kg

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump Crsdpjwykh Ssfx Aktei -Manufacturer: Vogel, OIL central lubrication pump oil inlet pump -Type: MFE 5/BW 7 -Container capacity: 6 l -Flow rate: 0.5 l/min / 20 bar -Dimensions: 360/145/H370 mm -Weight: 9.5 kg

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. Crsdpfx Akezmaqaetei More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit -Handover: in the current condition as seen -Retaining foot: broken, see photo -Manufacturer. Vogele, central lubrication type SP/AE A1/220/380/1 -Block distributor: SPVS 21S1Z 9A -Drive: Haffner 0.25 kW Csdpeitv A Nsfx Aktori -Individual components: see photos -Dimensions: 300/210/H320 mm -Weight: 19.8 kg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Crsdpfjxf Up Ijx Aktji

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil single-line pump -Manufacturer: SKF Vogel, OIL- central lubrication pump from Uldrian TSM 22-8 rotary transfer machine -Type: MKU11-KW2-0005 428 -Content: approx. 1.8 l -Flow rate: 0.1 l/min / 16 bar -Dimensions: 220/130/H230 mm Crjdpfxsm Rk Tpe Aktsi -Weight: 3.6 kg

Condition: used, Central lubrication, oil circulation system, progressive pump Crodpfsdnuhvox Aktji -pneumatic central lubrication -Dimensions: 140/200/H370 mm -Weight: 9.6 kg

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Codpfx Aoicic Hektsri Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit -Drive motor: Himmelwerk type 4Nga F 14/11 -Pump: 250 V 0.88 kW 1430 rpm Csdpfx Aefcw Trektori -Tank: 400/300/H200 mm -Dimensions: 700/320/H530 mm -Weight: 50 kg

Condition: used, Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit -Drive motor: VEB type KMER B 63 K 2 -Pump: 0.18 kW 2760 rpm -Tank: 300/220/H220 mm -Dimensions: 430/250/H460 mm -Weight: 24 kg Csdpfxsfcw Tuo Aktsri