Used Central Lubrication System for sale (11,312)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Kdsdpfjw Iqumox Abbjw Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine. Kdodpfjwvwl Aox Abbjw

Condition: excellent (used), Year of construction: 2012, Ref:11025 . 2012 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders - manual loading Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Kodpfxoxx Uyyo Abbodw Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: 2017 Kolbus ECK 100 Corner cutter Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Kompleksowo przetestowany i odnowiony, używany poziomy mieszalnik lemieszowy produkcji Morton model FKM800 wykonany ze stali kwasoodpornej AISI 304. Producent: Morton Materiał: stal kwasoodporna AISI 304 Pojemność: całkowita pojemność 800 litrów, robocza pojemność w zakresie 240-560 litrów (zależnie od produktu) Wymiary komory mieszania: średnica 760 mm x długość 1800 mm Kodpexx Abxjfx Abbodw Rodzaj rozładunku: centralny prostokątny otwór w dnie z pneumatycznie sterowaną klapą Typ mieszadła: wał z lemieszami ze stali kwasoodporna Napęd: silnik elektryczny o mocy 15 kW z przekładnią Dodatkowo posiada: zamontowane na bocznej ścianie 2 mieszadła szybkoobrotowe/choppery napędzane bezpośrednio silnikami elektrycznymi, każdy o mocy 4 kW. Specifications: Bowl Volume: 211.3 gal Motor Power: 15 hp Material Of Construction: Stainless steel (304) Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Dimensions: 1,800mm straight side x 760mm diameter

Condition: used, mileage: 322,718 km, Year of construction: 2000, Serial number: YV2J4DAG3YA50xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21239 Specifications: 2004 model Not EU-approved Last EU approval valid until: 31.08.2019 Repair object 322,718 km Manual transmission Euro 2 engine 379 hp Suspension: full steel Kdsdpfsw Ucktsx Abbow Hook lift Tipping box Tires (see pictures) Central lubrication Lights Radio Air conditioning Delivery by agreement Description:We have a Volvo FM12 8x4 hook lift truck (repair object) with a 20-ton hook system and tipping box for sale.The truck is sold as a repair object as it is not EU-approved. Defects and issues are present, and repairs must be expected.Tipping box included. Delivery by agreement. Km: 322718 HK: 379 Technical approved: no EU-approved until: 31.08.2019 Own weight: 13420 Total Weight: 34000 Payload: 20505 Width: 250 Length: 810 Euro: 2 Model: FM12 Gearbox: Manual

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, number of rollers: 4, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, total length: 5,950 mm, total width: 2,250 mm, total height: 2,350 mm, power: 38.5 kW (52.35 HP), input voltage: 415 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: cone bending device, hardened rollers, Morgan Rushworth DPBH-4 3100/400 Hydraulic 4 Roll Bending Rolls Model: DPBH – 4 3100/400 Year: 2018 Working length: 3100mm Central Rolls Dia.: 400mm Side Rolls Dia.: 300mm Machine performance on 3100mm full length: Pre Bending With minimum inside dia. of 600mm: 20mm Kodpfxoxvyats Abbodw With minimum inside dia. of 2000mm: 25mm Bending With minimum inside dia. of 600mm: 25mm With minimum inside dia. of 2000mm: 20mm Motor power: 38,5 kw Working Speed (double speed): `.5 – 5 m/min Power Supply: 415V-3Ph=50Hz Machine with: Bottom pinching roll with hydraulic positioning 2 Lateral rolls with double pinch pyramid action Hydraulic drop end Conical Bending Device Dimensions: 5950 x 2250 x 2350mm (L x W x H) Weight: 20,000 kg

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut Kdjdortrxiopfx Abbew * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: excellent (used), mileage: 10 km, power: 100 kW (135.96 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,220 mm, first registration: 06/2025, loading space length: 3,720 mm, loading space width: 1,750 mm, loading space height: 1,880 mm, color: white, driver cabin: day cab, suspension: other, tire size: 215/75R16, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Electric windows - Electric mirrors - None - Partition wall = Remarks = Configuration: 4x2, Payload: 1,141 kg, Curb weight: 2,359 kg, Gross weight: 3,500 kg, Trailer load, unbraked: 750 kg, Center axle trailer load, braked: 2,300 kg, Towbar, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking aid: Rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, Color: White, Heated mirrors, Rearview camera, Lighting type: LED lamp, Speed limiter, Lane keeping assistant, Air conditioning system, Seat heating, Bluetooth, Engine power: 100 kW (134 hp), Fuel: electric, Transmission: Automatic, Speed limiter, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side walls lined, Roof rack: None, Side doors: 1, Rear closure: Double doors, Central locking, Seats: 3, Seat configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L3H2 E-TECH 404km WLTP Navi 87kWh Advance Long-Range New + Immediately Available!, Tire type: All-season tires = Further Information = General Information Number of doors: 1 Registration number: V-26-LXB Axle Configuration Tire size: 215/75R16 Brakes: disc brakes Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: coil spring suspension Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: leaf spring suspension Dimensions Dimensions (L x W x H): 620 x 200 x 250 cm Weights Unladen weight: 2,359 kg Payload: 1,141 kg Ksdpfsxyfkxex Abbedw GVW: 3,500 kg Functional Load floor height: 60 cm Maintenance APK (periodic technical inspection): valid until 06.2029 Condition Technical condition: very good Optical condition: very good Damages: none Number of keys: 2 Financial Information Lease price: €640 (excl. BPM) per month (panel van, 72 months); Please inquire for more information and conditions

Condition: excellent (used), Year of construction: 2012, Ref: 11027 . 2012 Polar 115 XT Flowline Polar 115cm guillotine with paper handling system. Equipped with: Frequency controlled drive motor Variable speed back gauge Colour touch screen Automatic programming Memory Storage Capacity Variable pressure clamp for various stocks Chrome central air bed Chrome side tables left & right with air 2 x Spare knives Knife changing device Rear Table Guard I.R. light beam guarding Ksdpjxx Uukefx Abbodw Accessories: 2012 LW1000-4 Lift 2012 RA-4 Jogger 1999 TR130-ER4 Downloader Specification: Cutting width, Max: 115 cm Clamp opening, Max: 16.5 cm Feed depth, Max: 115 cm Power required : 5Kw

Condition: used, Używany poziomy mieszalnik lemieszowy produkcji Morton model FKM600D w wykonaniu części kontaktowych z produktem ze stali kwasoodpornej AISI 321. Materiał: stal kwasoodporna AISI 321 Pojemność: całkowita pojemność 600 litrów, robocza pojemność w zakresie 200-420 litrów (zależnie od produktu) Wymiary komory mieszania: średnica 790 mm x długość 1240 mm Rodzaj rozładunku: centralny otwór w dnie o wymiarach 300 mm x 240 mm z pneumatycznie sterowanym zaworem Typ mieszadła: wał z lemieszami ze stali kwasoodpornej AISI 321 Kdedpfx Abexxzzwsbow Napęd: silnik elektryczny o mocy 37 kW, 1500 obr./min, 3-fazowy 50 Hz z przekładnią produkcji Flender o przełożeniu 14:1 Urządzenie posiada możliwość montażu 2 mieszadeł szybkoobrotowych/chopper-ów - 2 sztuki drzwi rewizyjnych na bocznej ścianie o wymiarach 400 mm x 450 mm - Zamontowany na ramie ze stali węglowej Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Year of construction: 2003, operating hours: 13,354 h, Please contact ATS Norway for more information Please provide reference number upon request: 21761 Specifications: - 2003 model - Not certified - Number of hours: approx. 13354 - Weight: about 9 tons - Chassis (see pictures) - Worn belt strap - Worn sprocket wheel - Bucket - Central lubrication - AC/climate - Ready for delivery Description: 2003 Komatsu PC95R excavator with bucket. The owner has performed oil changes/services on the machine himself. Belt and sprocket are worn. Ready for delivery. Hours: 13354 Own weight: 9000 Kdsdpfx Aoxxpy Ijbbsw Model: 2003 Komatsu PC95R m/ skuffe

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Kedpfxoruakgj Abbodw Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), mileage: 390,809 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 07/2016, loading space length: 4,950 mm, loading space width: 2,100 mm, emission class: euro5, color: silver, driver cabin: day cab, tire size: 195/75R16, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional options and accessories = - Electric windows - Electric mirrors - Winch Kedpfx Aboxyfi Uobsdw = Notes = Configuration: 4x2, twin rear wheels, payload: 1,155 kg, kerb weight: 2,345 kg, gross weight: 3,500 kg, trailer load (unbraked): 750 kg, central axle trailer load (braked): 3,500 kg, towbar, winch, cab type: single cab, cruise control, air conditioning, airbags: 2, parking assistance: none, electric windows, electric mirrors, radio/cassette, GPS navigation, color: silver, metallic, heated mirrors, lighting type: halogen lamp, Bluetooth, engine power: 120 kW (161 hp), fuel: diesel, Euro: 5, drive system: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, central locking, seats: 3, seating configuration: 1+2, upholstery: fabric, seat adjustment: manual, L4 recovery vehicle Tijhof + winch, air conditioning, one owner, original Dutch vehicle, NAP certified, dual rear wheels, towbar, spare wheel, spare wheel tread: 8%, tire type: summer tires = Further information = Transmission Transmission: 6-speed manual gearbox Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: coil spring suspension Axle 1: tire tread left: 3 mm; tire tread right: 3 mm Axle 2: tire tread left: 3 mm; tire tread right: 3 mm Dimensions Dimensions (L x W x H): 790 x 210 x 225 cm Weights Kerb weight: 2,345 kg Payload: 1,155 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 85 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: VX-673-Z

Condition: used, Year of construction: 2015, operating hours: 13,436 h, CE mark: yes Serial number: 34xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20540 Kdjdpfxjwphyks Abbow Specifications: - 2015 model - 13436 hours - 63798 km - 30700 kg - 350 kW - Articulated steering - 6x6 - Bar - Tires - Central lubrication - Weight - Webasto - Air conditioning/ac - Radio - Heated mirrors - Chains - Light - Ready for delivery Description: We have a 2015 Volvo A40G dump truck 6x6 for sale. The dump truck has a full service history and functions as it should, according to the owner. The dumper handles the terrain well and is very efficient. Appears to be very well cared for and maintained. Ready for delivery Hours: 13436 Own weight: 30700 Kw: 350 CE: Yes

Condition: good (used), mileage: 128,367 km, fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,640 mm, first registration: 04/2018, loading space length: 3,200 mm, loading space width: 1,770 mm, loading space height: 1,930 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 205/75R16, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, = Additional Options and Accessories = - Electric windows - Electric mirrors - None - Partition wall = Notes = Configuration: 4x2, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking sensors: Front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Fuel: Diesel, Euro: 6, Drivetrain: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side walls lined, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seating configuration: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L3H3, automatic, air conditioning, navigation, parking distance control, camera, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 Registration: KLEYN1 Kdjdsxyfizspfx Abbsw Axle Configuration Tire size: 205/75R16 Brakes: Disc brakes Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: Coil spring Axle 2: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: Leaf spring Dimensions Dimensions (L x W x H): 600 x 205 x 260 cm Functional Loading height: 60 cm Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 1 Financial Information Lease price: €292 per month (van, 72 months); Please inquire for further information and terms

Condition: used, Year of construction: 2019, New: No Field of application: Construction Serial number: 03xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16463 Specifications: -2019 model - 2050 engine hours - 347 operating hours - Hc 95 Montabert hammer - 390 compressor hours - L5 Gps - Straight grinder - Rotabom - Winch - Central grease - 249cm machine width - 30 cm belt width - Range of 4.90m - 40cm2 drilling circle - Overcarriage can turn 360 degrees - Service history - Commuting on belts - Delivery by agreement Description: Great Stone Scout sold with few hours. Just had 1000 hours of service. Has a reach of 4.90 m and can drill approx. 40 cm2 in one space. Comes with L5 Gps and straight grinder. Delivery by agreement. Kdedpfsvg Hvasx Abbjw Hours: 968 Width: 249

Condition: good (used), mileage: 143,383 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,490 mm, first registration: 08/2020, loading space length: 4,090 mm, loading space width: 1,750 mm, loading space height: 1,930 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 235/65R16, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, traction control, trailer coupling, = Additional Options and Equipment = - Electric windows - Electric mirrors - Includes roller and ladder - Partition wall = Remarks = Configuration: 4x2, Towbar, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Engine output: 130 kW (174 hp), Fuel: Diesel, Euro: 6, Drive: Timing belt, Transmission: Manual, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Sidewall cladded, Roof rack: includes roller and ladder, Sliding roof, Side doors: 1, Rear closure: Double doors, Central locking, Seats: 3, Seating layout: 1+2, Seat upholstery: Skai, Seat adjustment: Manual, SCHADE ac EURO6, Spare wheel, Spare wheel tread: 4%, Tire type: Winter tires = Further Information = General Information Kedpsxyfiuefx Abbsdw Number of doors: 1 Registration number: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 3 mm; Tire tread right: 3 mm; Suspension: Coil spring Axle 2: Tire tread left: 7 mm; Tire tread right: 3 mm; Suspension: Leaf spring Dimensions Dimensions (L x W x H): 700 x 205 x 280 cm Functional Loading platform height: 67 cm Sliding roof: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 1 Financial Information Lease price: €211 per month (panel van, 72 months); Please inquire for further details and conditions

Condition: used, Year of construction: 2004, operating hours: 15,500 h, Serial number: L110EVxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21415 Kdodpfxexhcfce Abbjw Specifications: Delivered with new certification 2004 model Hours: approx. 15,500 150 kW Tires (see pictures) Central lubrication Bucket included 3rd function Quick coupler Rearview camera Rotating beacon Extra work lights Radio/CD Climate control / AC Video available Description:Volvo L110E wheel loader from 2004.Comes with bucket and has approx. 15,500 operating hours.A new certification will be carried out before sale.Can be delivered at short notice.See video. Hours: 15500 Own weight: 18150 Model: L110E

Condition: used, Year of construction: 2021, operating hours: 2,750 h, Serial number: YY0904xxxx Kedpsxx H S Ijfx Abbedw Please contact ATS Norway for more information Please provide reference number upon request: 21836 Specifications: Model year: 2021 Hours: 2750 (may increase) Weight: 17,000 kg 86 kW Undercarriage (see photos) Dozer blade Quick coupler Central lubrication Hammer hydraulics R5 Rototilt 700 L digging bucket Trenching bucket Grading bucket Grading beam Pallet forks SE ripper Grapple with combi mount, 60–70 Extra work lights Radio/CD Air conditioning Service history Ready for delivery Description:Well-maintained Kobelco SK140 from 2021.Sold with a large equipment package: Rototilt, three buckets, grapple, ripper, grading beam, and pallet forks.A hydraulic breaker can be included at an additional cost.Complete service history available.Ready for delivery. Hours: 2750 Own weight: 17000 Kw: 86 Model: SK140SRLC-7 Beltegraver m/ MYE utstyr. 2750 timer.

Condition: used, mileage: 1,244,000 km, Year of construction: 1999, Serial number: YV2A4BAD4XA29xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21144 Specifications – Volvo FH16 (1999): Year: 1999 Mileage: approx. 1,244,000 km EU approved until: 30.11.2025 6x4 Wheelbase: 430 / 138 cm 520 hp Engine brake Suspension: parabolic Manual gearbox Tires (see photos) Equipment and Condition: Extra wiper heating Front tires are very worn Thermostat replaced Instrument cluster malfunction Fuel gauge not working Central lubrication Liftable axle All belts recently replaced in workshop Valve cover replaced by owner Rear flatbed replaced by owner 400-liter diesel tank Ready for delivery Briab grain trailer (1983): Year: 1983 EU approved until: 19.06.2026 3 axles Ksdpfxsw Ruxzs Abbodw Length: 1010 cm Air bellows replaced Tipper ABS fault (owner says it’s due to a sensor) Ready for delivery Narko timber trailer (1981): Year: 1981 EU approved until: 30.06.2026 Left rear brake band replaced Faulty sensor Ready for delivery Cranab CRX 10 t/m crane (1993): Certified until July this year New diesel heater

Condition: used, Year of construction: 2020, operating hours: 6,700 h, Serial number: K7xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21837 Specifications: Certified until 05/2026 Model year: 2020 Hours: approx. 6700 Weight: 25,600 kg 141 kW New tracks and sprocket to be installed before sale SMP grading bucket Engcon EC233 Rototilt (2020 model) Central lubrication S70 quick coupler Track width: approx. 60 cm Cameras on all sides Additional work lights Beacon Radio/CD Air conditioning 6500-hour service completed Description:Komatsu PC240LC-11 with approx. 6700 hours.The excavator has had the 6500-hour service completed and will be delivered with new tracks and sprocket.Includes grading bucket and Engcon Rototilt.Certified until May 2026 and ready for work.Quick delivery available. Hours: 6700 Own weight: 25600 Kw: 141 Model: PC240LC-11E0 Beltegraver m/ Rotortilt og Pusseskuffe Kedexx H Tfjpfx Abbjdw

Condition: used, Year of construction: 2006, operating hours: 15,000 h, Serial number: L110EVxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21823 Specifications: Kodpfsxxp Dysx Abbjdw Year: 2006 Hours: approx. 15,000 (estimated) Weight: 18,500 kg Power: 169 kW Tires (see pictures) Bucket approx. 290 cm wide Central lubrication 3rd function Rear-view camera Damaged fender Work lights Rotating beacon Radio/CD Climate control/AC Description:Volvo L110E wheel loader from 2006 for sale with bucket.The hour meter has stopped; the owner estimates it has run close to 15,000 hours.Joystick steering is defective.The loader is equipped with a 3rd function and central lubrication.Quick delivery is possible.See video. Hours: 15000 Own weight: 18500 Kw: 169 Model: L110E hjullaster m/ skuffe SE VIDEO

Condition: used, Year of construction: 2018, operating hours: 6,700 h, Please contact ATS Norway for more information Please provide reference number upon request: 21833 Specifications: Model year: 2018 Certified until 11/24 Hours: approx. 6700 Weight: 25,400 kg 128.4 kW Central lubrication Undercarriage (see photos) Track width: 60 cm Total width: approx. 299 cm Digging bucket Grading bucket Engcon Rototilt KM70 quick coupler Kdodpfx Ajxx H Suebbsw Extra hydraulics Light bar Additional work lights Rear-view camera Easy Dig machine control Radio/CD Climate control/AC Video Service contract with Nasta Ready for delivery Description:Well-maintained Hitachi 225 from 2018.The machine is sold with Rototilt, two buckets, and Easy Dig machine control.It has been maintained under a service contract with Nasta.Ready for delivery. Hours: 6700 Own weight: 25400 Width: 299 Kw: 128,4 Model: ZX225USRLC-6 Beltegraver m/ Rototilt, 2 skuffer og Easy Dig. SE VIDEO

Condition: used, Year of construction: 2015, operating hours: 2,600 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21350 Specifications: 2015 model 2600 hours Weight: 22300 kg 122 kW Certified until 09/26 Belt width: 60 cm Machine width: 300 cm App-controlled webasto Camera Central lubrication Tooth tray Sanding bucket Rotor tilt Kjdpfjxdhxmox Abbedw Chassis (see pictures) Air conditioning/ac Ready for delivery   Description: 2015 Hitachi ZX210LC with 2 buckets for sale. The excavator has run for 2600 hours. Certified until 09/2026. Ready for delivery. Hours: 2600 Own weight: 22300 Year controlled: Yes Year controlled until: 09/26 Width: 250 Length: 1272 Kw: 122 CE: Yes Model: ZX210LC

Condition: used, Year of construction: 1995, operating hours: 6,100 h, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21807 Specifications: 1995 model Kdjdoxw Ni Tepfx Abbew Approximately 6100 hours Poor suspension Errors and omissions Cleaning bucket Sorting tray Narrow drawer Direct attachment to the pole Starts and runs Sweating of hydraulic oil from cylinders (boom and stick) Import machine Sweating from hose from tank to central Ready for delivery Description: We have a 1995 Komatsu PC60-5 excavator with dredging bucket, screening bucket and narrow bucket for sale. The machine starts working as it should, but has errors and deficiencies as mentioned above in the specifications. Some cost must be taken into account. Ready for delivery Hours: 6100 Own weight: 1 Model: pc60-5 gravemaskin m/ renskeskuffe,soldeskuffe og smalskuffe