Used Copier Printer Scanner for sale (3,008)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer used SCANNER HS5000 for use on RISO CC3110/3150/7150/9150 4 SETS OF RISO HS-5000 SCANNER IN STOCK. We offer used SCANNER HS4000 for use on RISO CC3010/3050/7050/9050 2 SETS OF RISO HS-4000 SCANNER IN STOCK. WE OFFER PARTS FOR RISO MACHINES ANY TYPE SCANNER PRICE ON THIS ADD IS PER UNIT The set of any scanner is coming with the following configuration: • 1 X Riso HS-5000 or HS-4000 • 1 X STAND (TABLE) • 1 X POWER CABLE • 1 X USB CABLE Condition: This offer contains used devices, which may show signs of use. (Minor scratches or yellowing may apply on the devices). Bodpoq Npgysfx Aknowu General: - The devices are complete and working well. Tested. - We can ship it worldwide, after secure its systems inside and store it on a 1 euro-size pallet 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us .

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Bwedjzrfiropfx Aknou Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals Disassembly logs Functional logs Bwedpfjz Irhkex Aknou All axes secured for transport in a professional manner The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys Last material processed: AlSi10Mg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,056 h, total length: 1,640 mm, total height: 1,920 mm, total width: 1,000 mm, overall weight: 700 kg, laser power: 30 W, Equipment: compressor, The Prodways ProMaker P1000 is a professional selective laser sintering (SLS) system designed for the production of durable, functional parts and serial production. This 2019 model is equipped with a unique 30 W CO₂ laser and features a spacious build chamber measuring 30 x 30 x 36 cm (32 L). It is compatible with a wide range of materials, including nylon 12, nylon 11, TPU, and PP, and its open material parameters allow you to precisely adjust existing settings or qualify new powders based on your specific applications. It shows some minor cosmetic wear but is in perfect working order. Maintenance was performed in September 2026; the 30 W laser has 1,056 operating hours. The sale includes everything needed to start printing: - the printer with its control computer, Bwedjz E R Iqspfx Akneu - a Claind Nitro 35 nitrogen generator, - a Cormak Luft 700 air compressor (new), - a stainless steel powder mixer (new). The original packaging is available. Live demonstrations and test prints can be arranged.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was last used with aluminum powder AISi10MG. Bwodpfxovu Syye Aknsu The 3D printer has already been dismantled by the manufacturer and was fully functional up to that point. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Trumpf TruPrint 5000 with the options Powder Bed Monitoring and Melt Pool Monitoring included. Filter system. Accessories: 2 pcs. build cylinders 3 pcs. dosing cylinders 1 pc. overflow container, used 1 pc. overflow container, new Manuals 4 pcs. heat exchangers, new 2 pcs. Easy Filter, new 3 pcs. NTRON SIL02 oxygen analyzer + sensor, new 1 pc. oxygen sensor, new and much more, such as seals, etc. Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial series production. With features such as an optional 500 °C preheating function and the full-field multi-laser system with three 500-watt TRUMPF fiber lasers, you are well-equipped for highly demanding industrial applications. The machine quickly and reliably produces high-quality components from various metallic materials – and meets the high quality requirements in tool and mold making, also through 3D printing on preform blanks, in the aerospace industry, and in medical technology. Optionally, the entire process chain can take place under a protective gas atmosphere: sieving, printing, cooling, and depowdering. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating > 200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 No warranty claims accepted. Maintenance and service are not offered.

Condition: excellent (used), Year of construction: 2013, The EFI VUTEk GS3250 is a 3.2-meter, high-production UV hybrid flatbed/roll-to-roll printer. It is engineered to seamlessly bridge the gap between high-margin, photo-realistic point-of-purchase (POP) graphics and heavy-duty, fast-turnaround commercial print runs Eight colours + White Bwsdpfez Dh N Asx Aknou Western Europe Installation possible upon reqiest In production, demo possible Official documentation outlines the comprehensive technical specifications and facility requirements for the VUTEk GS3250 system are enclosed

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software Bjdpfszlx E Tox Aknewu 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Bedsz Et T Nspfx Aknowu For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: Bjdpezh I Aaofx Aknewu 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Bwjdpfoy Hmhhsx Aknsu Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, For sale is a professional Stratasys Objet30 V2 3D printer, manufactured in 2013. Technical specifications / features: * Manufacturer: Stratasys / Objet * Model: Objet30 V2 * Year of manufacture: 2013 Bedpszwv E Iofx Aknewu * Printing technology: PolyJet * Build volume: approx. 294 × 192 × 148 mm * High level of detail and fine surface finish * Professional industrial-grade equipment * Original base frame on rollers Ideal for prototyping, product development, model making, design, and technical components. Used, condition appropriate for its age. Inspection possible by appointment. Collection by the buyer. Subject to prior sale and errors.

Condition: repair required (used), Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a high-performance textile printing machine that offers outstanding print quality, high speed, and versatility. It is particularly suitable for textile printing companies that want to produce top-quality prints in large quantities (roll-to-roll) on a wide variety of fabrics. Bodpfxjvmdw Ij Aknowu Up to now, it has primarily been used for printing cotton fabrics: jersey, French terry, cotton woven fabric, canvas, sweatshirt fabric, and viscose & modal qualities. It is being sold due to a business downsizing. The textile printing machine is currently still in operation and can be inspected at any time by appointment. We are still printing fabrics with it. However, the machine would need to be serviced – the slave PC is slow, and the color channels would need to be reworked. The following items are included with the machine: dryer, unwinder, and rewinder. In other words, a complete production line. In addition, we will also include all remaining spare parts, inks, etc. IT IS BEST SUITED AS A SPARE PARTS STORE, IF PARTS ARE MISSING,... Technical data: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, Magenta, Yellow, Black, Red, Green, Gray Print heads: 64 x Spectra Polaris, recirculating – (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Printing speed: Up to 200 m²/hour Printing modes: Several printing modes from 400-1200 dpi Recommended printing mode: 600 x 600 dpi in 6 passes using the staggered line printing method Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveying system Fabric feed system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Max. media thickness: 15 mm Max. roll width 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min IF THE MACHINE IS TO BE PUT BACK INTO PRODUCTION, IT WOULD BE RECOMMENDED TO HAVE THE MACHINE OVERHAULED AND REBUILT/SERVICED BY KORNIT – THE BUYER WILL BE RESPONSIBLE FOR THESE COSTS!

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Bjdjz A Sycopfx Aknowu Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: excellent (used), Year of construction: 2018, The EFI VUTEk GS2000LX Pro is a production-level, hybrid rigid/roll-fed superwide inkjet printer engineered for high-definition point-of-purchase (POP) graphics, indoor signage, and industrial advertising. Utilizing advanced LED UV-curing technology, it balances high-throughput productivity with an eco-friendly design that handles heat-sensitive substrates seamlessly Excellent conditions, 8 colours + White In production, demo possible Western Europe Installation and training available upon request Bsdpfxez Dhnle Aknewu For further technical specifications please refer to attached brochure

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Bsdewpkcnopfx Aknewu Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Bwodpfez Dgfvox Aknsu Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Bwodpfx Aksz Dudgsnju Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Bwsdpfx Aoz Dugnoknou Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Bsdpfx Ajz Duhrsknowu Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Bedpfez Dudmsx Aknowu Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Serie number D00794, operating hours: 9,230 h, Stratasys F370 3D printer Bjdsy N Dhqjpfx Aknjwu

Condition: used, Year of construction: 2022, Equipment: photoelectric sensor for product detection, floor stand with printhead holder, status display, 3x 1l solvent, 1x 1l ink, cleaning unit, table, character height: 2-10mm, max. speed: 1,148characters/s, voltage: 100-120VAC/200-240VAC, phases: 1, frequency: 50/60Hz, current consumption: 1.2/0.6A, length: 400mm, width: 320mm, height: 527mm, weight: 27kg, operating hours: 155h, an on-site inspection is possible. Bsdpfx Aoz Egd Ujknswu

Condition: good (used), Year of construction: 2019, The Durst Rho 312R is an industrial-grade, 3.2-meter roll-to-roll UV inkjet printer optimized for high-volume production of backlits, fine art prints, POP displays, and outdoor advertising. Manufacturing Year: 2019 Double side print option Colour configuration: 4 colors Mileage: 220.000m² only! In production Printhead status: some slots must be replaced Demo possible Location: Western Europe For further technical information please refer to attached brochure. Bedpfx Aksz Hw Iajnowu Productivity & Speed • Maximum Output: Up to 240 m²/h to 274 m²/h in standard high-speed modes. • Boost Mode (Plus Variant): Up to 305 m²/h. • Production Mode: Roughly 128 m²/h to 130 m²/h. • Multi-Roll Printing: Supports simultaneous printing on two 1.6-meter rolls with independent queues

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS3250LX Pro is an industrial-grade hybrid (flatbed and roll-fed) UV LED inkjet printer. It is designed for continuous production on both rigid substrates and flexible roll materials, bridging the gap between point-of-purchase (POP) quality and high-speed production. Manufacturing Year: 2014 Bwedpfez Hw Tpox Akneu Color configuration: Fast four (CMYK) + White Printheads: Seiko 12 picoliters Printhead status: Perfect (spare heads on stock) Spare spare parts and refurbished belt included In prodcution Demo possible Location: Western Europe For further technical details refer to enclosed data sheet Productivity & Speed • Up to Speed Mode (Fast-4, 600 dpi, no smoothing): Around 223 m²/hr (2,400 ft²/hr) or up to 60 standard 1.2 m x 2.4 m boards per hour. • Eight-Color Plus White Mode: Up to 111 m²/hr (1,200 ft²/hr) or roughly 32 boards per hour. • POP Quality Mode (600 dpi, 8-color, light smoothing): Approximately 84 m²/hr (900 ft²/hr). • Best Quality Mode (1,000 dpi, 8-color, heavy smoothing): Roughly 26 m²/hr (275 ft²/hr). • Continuous Board Production: Less than 5 seconds of gap time between rigid boards using its precision alignment fence

Condition: used, Year of construction: 2016, Media width: 610-3200mm, max. print width: 3200mm, max. borderless print width with Mesh Kit: 3200mm, min. media thickness: 0.2mm, max. roll weight: 100kg, max. roll diameter: 360mm, max. speed in Express mode: 75m²/h, max. speed in Production mode: 38m²/h, max. speed in Standard mode: 30m²/h, max. speed in High Quality mode: 23m²/h, max. speed in High Definition mode: 18m²/h, positive text quality: 4pt, negative text quality: 6pt, required footprint: 7700x3000mm, length: 5960mm, width: 1650mm, height: 1980mm, weight: 3.5t, an on-site inspection is possible. Bsdpfx Ajz Eucxoknowu