Copy attachment buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Serial No. 5941 + 1 Table Size 54" / 1371mm Swing 60" / 1524mm Height under cross slide 43" / 1092mm Bciejwo7ur Cross slide rise & fall 21" / 533mm Turret rise & fall 36" / 914mm Turret traverse 36" / 914mm Speeds 4.5 - 100 rpm Feed rate 0.005 - 0.250 Input 400/3/50 40 hp Digital Readout 2 axis Fitted with Scan-o-matic hydraulic copying attachment. Nett weight actual. 14,010 Kgs / 13.79 Tons more
5
base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) details: adjustment travel upper table longitudinal=60mm (manual) transverse travel = 20mm Yqbzw0 under frame=approx. 60mm ( lockable) template table size 310x150mm perfect used condition more
10
Serial No. 19470 Centre height 400mm Distance tailstock to faceplate 3000mm Swing over bed 850mm Swing over saddle 650mm Maximum diameter held in steadies 250mm Minimum distance between centres 170mm Input 380/3/50 ac 14 kW Spindle speeds 1.2-38 rpm Equipment "Rank Mikop" Hydraulic Copying Attachment Model R180 Length 22'8" / 6.91m Width 6'6" / 1.98m Height 5' / 1.52m Nett weight 8.43 ton / 8560 kgs Comments ***Video shows the machine under power*** Bciesbp2fn more
1

HYDRAULIC COPY LATHE COYER CP 1300 SA

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Iejekbz Coyer Automatic Hydraulic Copy Lathe Model CP 1300 SA with hopper feed. -- Equipped with: One finishing back knife slides two heavy precision Teflon columns for a balanced effortless smooth knife traverse. Tool carriage with two V-roughing knives with respective high-low speeds controlled by proximity switches. -- Sequence and Hydraulic Controls: Carriage high-low speed, knife pressure and tailstock holding hydraulic pressures are centralized... more
1
Serial No. 1005 PAR 578 Length of rolls 3000 mm x 6 mm Roll diameter 240 mm top roll, 190 mm bottom. Roll rise & fall top roll by hand Input 380/3/50 10hp approx Fitted with section bending facility, cone rolling attachment and drop-end. Tkxjd9bd Length 15' 10" Width 3' 4" Height 5' 4" Nett weight actual. 4,900 Kgs / 4.82 Tons more
3
Copymat DP and AP. Copy devices 1301 A 3 for conventional lathe, used, normal wear, 100% functional caution: Please separately request costs for shipping and handling! ATTENTION: Please inquire for charges for packing and transport separately! Bcjdtlo0rs more
5
Copy milling machine, copying milling machine, hand lever machine, hand lever tiller -for the processing of aluminium - and steel profiles -with 1 vertical milling motor Traverse paths x 280 mm / Y 110 mm / Z 120 mm Srtmds -2 x stop tables Transport dimensions 760/500/H1450 mm Weight 130 kg more
2

Prepress O.M.S Copystar A2

St.Leon-Rot bei Heidelberg, GermanyGermany dealership location
6602 km
ready for operation (used)
Machine type: Dyg3ya2 Copystar A2 Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: Available from: Immediately available Machine is: on Stock plate copy frame standard more
7
Refurbished Pertici Single Head Copy Router. Comes with : Blank Copy Template Serial No : 3055419 Power : 1100 W Voltage : 260 / 400 V Amperage : 2.35 - 3.9 A Bcsm3ikxxc Frequency : 50 Hz more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbuqs77g0j 74.8" (1900mm) max. between centers and 8-5/16" (210mm) height of center over bed, max. copying dia. of 3.5" (90mm) with standard steady rest. 5.5 Hp spindle motor & 3 Hp hydraulic motor. Automatic work cycle sequencing with electronic control. -- Electronic drive from 1000 - 500 RPM spindle speeds; Hydraulic variable speed carriage. --Equipped with: One Hydraulic tracing units; 3.5" max. square part size. --Includes: (2) backnife holders an... more


copy attac...
daily

New machines via email!

Stay updated!
4

Lockformers CARTER zc-10r-7s 1.2 mm 7 Station Lockformer with Flanging Attachment

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 2206165 Capacity 1.2 mm Number of stations 7 Input 400/3/50 2hp approx Ned0h Machine set for pittsburg lock Fitted with flanging attachment Length 3' 6" / 1.06m Width 1' 10" / 558mm Height 3' 6" / 1.06m Nett weight actual. 250 Kgs / 0.25 Tons more
5
Copying head of part of, copy head, part head Copy head for lathe Dimensions 280/260/H245 mm Weight 15.5 kg Dprj2cg more
3

Prepress WALDHAUSER Multicopy

St.Leon-Rot bei Heidelberg, GermanyGermany dealership location
6602 km
ready for operation (used)
Machine type: Multicopy Condition (technical): Bskue0u3 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: Available from: Immediately available Machine is: on Stock plate copy frame standard more
15
We offer: Tbhjorhh Office desk ASSMANN 217 x 80/113 x 68-76 cm with attachment The Office furniture was acquired as part of a takeover of an insolvent company. This was inzwischeb demomtiert and storage METRA offers all the advantages of a modern workstation system with ergonomic added value by adjusting the individual work above the convenient adjustment. Salient feature is designed ideally for chaining solutions, or as a single workplace unsurpassable stable and solid the classic dou... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glm9lfwgq CENTAURO TA-F-EC Automatic Copy Lathe with (2) Copiers and Hopper [...] control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & [...] Specifications: -- 78.7" (2,000 mm) Max. between centers, 10 HP (15 kW) main motor, variable 0 - 4,500 RPM spindle speed; -- 1.5 HP (1.1 kW) Hydraulic power pack ... more
9
Serial No. AT 471 443 Capacity 1200 mm swing x 2000 mm between centres Table swivels 6 degrees - 0 - 6 degrees Table traverse speed hydraulically variable Cuopv3l Work head input 5 hp Work head speeds 10 - 90 rpm Wheel head input 25 hp approx Wheel head infeed rate variable Nominal stone size 1200 mm diameter x 95 mm wide Internal grinding attachment input powered swing down type Input 380/3/50 Fitted with coolant Length 21' Width 10' 4" Height 8' 8" Nett weight approx. 20 ton / 20,320 kgs more
2

COPY SHAPER machine BALESTRINI C70 BALESTRINI C70

MARIANO COMENSE, ItalyItaly dealership location
6817 km
good (used)
COPY SHAPER machine Type BALESTRINI C70 . AUTOMATIC Max. working width mm. 360 Max. working heigth mm. 90 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 2z2xmivuw n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable speed motor net weight : kgs. 1100 more
5
profile turning attachment for Schutte multi spindle automatic lathe AF81, used profile turning attachment C68AE26S1B Bydm8yby joint shaft drive shaft D7827-67A gear 8W1-67S intermediate shaft D7825A-67S for drive 1:1 or 2:1 gear 8W2-67S gear WAG-67A more
15
We offer: 5 x Office desk ASSMANN 217 x 80 / 113 x 68-76 cm + attachment The Office furniture was acquired as part of a takeover of an insolvent company. This was inzwischeb demomtiert and storage Assmann offers all the advantages of a modern workstation system with ergonomic added value by adjusting the individual work above the convenient adjustment. Manufacturer: Assmann office furniture Mass desk: Width: 217 cm Depth: 80-113 cm Height: adjustable 68-76cm Elektroverteilsystem... more
1

MULTI SPINDLE COPY LATHE ZUCKERMANN OPTIMA 1200/8/S

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y2faib2 ZUCKERMANN OPTIMA 1200/8/S Copy Lathe for asymmetrical or symmetrical wood turnings ranging from furniture legs (Queen Anne), gunstocks, guitar necks, to tool handles and the like. -- General Specs: 8-Spindle Copy Lathe, 42" max. copying length, max. working dia. 200 mm (7.86"); 5.5 HP motor on each spindle, 6,000 RPM belt driven spindle with cup cutters. All cutters are copying according to one sample specimen. -- Equipped with: (8) Single... more
17

Horizontal Borers UNION BFT90/2 Horizontal Borer with Facing Head and Milling Attachment.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 24891 Table size 1410 mm x 1250 mm Table Longitudinal traverse (Y) 2000 mm Table Cross traverse (X) 1400 mm Table Swivels 360 degrees Head stock vertical traverse (Z) 1350 mm Input 415/3/50 7.5 kw Spindle & facing speeds 8 - 200 rpm Spindle speeds 250 - 1600 rpm Feed rate 0.003 - 20 mm / min Facing head diameter 520 mm Facing head slide cross traverse 180 mm Spindle traverse 700 mm Spindle diameter 90 mm Spindle Taper 40 int Digital read out anilam Fitted with off-set milling head spi... more
1
AUTOMATIC COPY SHAPER machine type BALESTRINI MINI C . second hand machine composed by n. 02 working units max. working length mm. 2500 max. working height mm. 180 Bhz2vmls max. working width mm. 450 tools rotation speed rpm 8000 feed speed of carriage : from 1 to 15 mt/min retun feed speed carriage mt.min. 35 spindle motors power Hp 7,5 x 2 hydraulic pump motor power Hp 4 Volt. 380/50 more
1
Copy milling machine Kuhlmann type GM 1-2 Machine in excellent condition. Optional: very extensive accessory charges Accessories is located in 6 Lista tool drawer cabinets. For example milling spindles, various papers, milling cutters with quick change device, Kopierdorne, RADIUS template for radii at 0, 5 mm upwards, jigs, templates and much more. Bfwjziwzw The tool cabinets can not be readmitted. Ssonderpreis more
5
Copy head, copy head, copying copying lathe Sss0cg Copy head for lathe -Without hydraulic power pack Dimensions 1100/170/H370 mm Weight 143 kg more
11

Copying lathe Hapfo

Oberkail, GermanyGermany
6437 km
1987
excellent (used)
Woodturning machine with copy device Fabr. Hapfo Gmvpyapgo Bu. 1987 Top width 1500 mm with 3 jaw Chuck + accessories (Sharpener for chisel). more
1
Elect./Voltage: 400/440V, 50/60 Cy, 3 Ph Ncb0l 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. of 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- 6" (150 mm) Hydraulic tracing stroke. 5.5 HP (4 kW) drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Spindle Shaft: Double, precision, sealed ball beari... more
1
Chamfer attachment for 130 mm Planer heads AKE 163 x 16 x 50 mm, 3 x left, 1 x right side, price per piece: €25,00 + VAT Subject to prior sale. Hg9beg0og more
5

Attachments HAMMER GRP250CH

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2018
ready for operation (used)
2.000 €
Offer
Another 9 days
Bcsw2eu2qq more
6
Max. length: 1400 mm Max. diameter: 250 mm Hopper feed at the rear Tp3vfoycj Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
5
Copy milling machine, copying milling machine, hand lever machine, hand lever tiller Speed spindle 12000 1/min Qkqqbrvaw pneum-with. Voltage Spraying device more
5
1 spindle copy milling machine for aluminium profiles with attacks Bcoez088sp more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
6

Copy Milling Machine PERTICI FC 101 univer

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1998
used
x-travel - mm y-travel - mm z-travel - mm Bctbcl9300 weight of the machine ca. - t more
5

Attachments BW RG05

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2018
ready for operation (used)
2.500 €
Offer
Another 9 days
Bcsw0rsqio more
6

linear copy shaper BALESTRINI CP 90

Heule, BelgiumBelgium dealership location
6178 km
1992
used
Max workpiece length: 2500mm V70no Max working width: 500 mm Max working height: 180 mm Equipment left: Shaper 5,5 kW, shaft 35 mm Shaper 5,5 kW, shaft 35 mm Sanding unit 3 kW 4200 O/min, sanding belt speed: 25m/sec Equipment right: Shaper 5,5 kW, shaft 35 mm Shaper 4 kW, shaft 35 mm Hydraulic trough feed Carriage feed speed: 1 - 18m/min more
5
Copy milling machine, copying milling machine, hand lever machine, hand lever tiller -For the processing of aluminium - and steel profiles -with 1 vertical and 1 horizontal milling motors -for each motor 0.75 kW 6,000/12,000 Rev/min Hh7gvlnpo Weight 230 kg more
3
Vibration frequency: 2000-2200 DH/min Amplitude: +/-1,5-3 mm Pressure: 1,5-3 bar Air consumption: 8-10 m ³/h Weight: 26 kg I3eetnr more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glmzmofv3 NC automatic copy lathe for symetric and asymetric parts. 76" max. length cap with automatic hopper feed of 65" (1700 mm) stock capacity. -- Single spindle copy (from template or sample) shaping and sanding lathe with SIEMENS "Sinumnerik 810" NC control, color graphics display; can program spindle speeds, feedrate, parameters etc for each profile. 76" Max. length with double end drive, 4 HP motor, shaper head with 5.5 HP motor. -- Variable ... more
4

Attachments Rent demolition BS16

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2018
ready for operation (used)
3.500 €
Offer
Another 9 days
Hjtejanam more
6
Second-hand machine Year of construction: 2001 Condition: Machine produced to the last Equipment and technical data: Adjustable infeed fence Jointing cutter with 2,2 kW motors Roll and strip magazine Vrikni Quickmelt Verleimen power pack with glue roller 4 pressure rollers, 1 running to specified drives, 3 pneumatically adjustable end-trimming unit Chamfer milling unit, sampling, angle-adjustable RADIUS milling unit, sampling, angle-adjustable Contour trimming unit Scraping... more
5
Copy head, copy head, copying copying lathe L8yxsku Copy head for lathe -with hydraulic power pack Transport dimensions 1200/800/H650 mm Weight 216 kg more
3
Vibration frequency: 2000-2200 DH/min Bctda8w0jm Amplitude: +/-1,5-3 mm Pressure: 1,5-3 bar Air consumption: 8-10 m ³/h Weight: 26 kg more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 2q7bwm HAPFO AP-5000-NC-3100 Hydraulic Copy Lathe with NC(PLC) Control and Spiral/Twist attachment. Capacity: 3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. Equipped with: -- Hydraulic Copier with 6" (150 mm) tracing stroke. -- Spindle/carriage drive: 5.5 HP (4 KW) spindle drive motor, electronic variable spind... more
2

copy and coordinates nibbling machine Trumpf CN 700

Bad Homburg v.d.Höhe, GermanyGermany dealership location
6557 km
good (used)
Ref.-Nr. 00461 Description copy and coordinates nibbling machine Wbh7jfbn Made Trumpf Model CN 700 Year of made unknown Working area 2000x1000mm Power 4mm sheet Technical information See below Technical condition Good Delivery date Immediately more
5

Attachments HEINZ HT252

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2018
ready for operation (used)
2.000 €
Offer
Another 9 days
Nfher more
4
Austellungsmaschine. Bc29ayl8s Use unless the machine has not been some trial runs. You can use processing of timber and plastics production of molded parts (prototyping) production by working with stencils on the stylus electronic measurements of all 4 movements with LED display Kopierstifte double-sided, Chuck Morse MK2 or Collet clamping stage on precision linear Guide system (ball guided trolley and ballscrew) swivel Control Panel ensures optimal operability RADIUS (distance between s... more
5
Copy milling machine, copying milling machine, hand lever machine, hand lever tiller -for the processing of aluminium - and steel profiles Qkn3tinx8 -with a vertical and a horizontal milling motor -for each motor, 0,74 kW 12,000 rpm Stroke length 2000 mm Weight 270 kg more


copy attac...
daily

New machines via email!

Stay updated!

to

to

Edit search
COPY ATTACHMENT
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close