Used Copy Setup for sale (1,714)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 8450-02-001, rotary table diameter: 4,000 mm, Equipment: chip conveyor, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Machining stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Lhedpfx Aexur Rusgrsp Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large 4,000 mm diameter for extensive machining operations - 12 NC drilling units with 12-piece clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system with filtration and coolant system - Measuring system and automatic loading and unloading for seamless automation

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Lhodpfx Agjxxp Ekjrjp Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Lhodpfx Asxxiuxsgrep Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving Lhjdpfx Ajw Iqumjgrjp tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Lhsdpfx Aohwhfqogrop Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, mileage: 405,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Ledpow Raf Hefx Agrehp Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: reconditioned (used), operating hours: 40,662 h, functionality: fully functional, clamping force: 306 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, ejector stroke: 80 mm, total length: 2,520 mm, total width: 860 mm, total height: 1,900 mm, overall weight: 1,150 kg, Now fully refurbished at our headquarters in Northamptonshire, is this BOY 30M injection moulding machine. Ljdpfx Agsv S D Svorehp The 30 machine is a rare find on the used market as it offers a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 49 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: new, The KNWP H 100 is a robust Motorized Workshop Press, part of the Workshop Presses category by KNUTH. This hydraulic workshop press features a torsionally rigid welded gantry-style frame, making it ideally suited for professional use in technical workshops and maintenance departments. Its stable portal design includes an adjustable open support table that allows for versatile applications, such as pressing in and out bearings, assembly work, and testing workpieces. The press boasts a finely adjustable press force of up to 100 tons and a long piston stroke of 400 mm, ensuring efficiency and adaptability for various tasks. Operators can monitor the current working pressure via the built-in gauge, while the horizontal adjustment of the working cylinder simplifies setup without needing to reposition the workpiece. To enhance reliability, the KNWP H 100 is equipped with premium components and includes a motorized hydraulic drive, movable working cylinder, and height-adjustable work table. For anyone seeking a dependable Motorized Workshop Press, the KNWP H 100 is an excellent choice—request a quote today to add this essential tool to your lineup. Lhodpsuyh A Eofx Agrep

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Lhedpexylqxefx Agrsp

Condition: good (used), Year of construction: 2014, lifting height: 30,500 mm, fuel type: diesel, Weights Empty weight: 7.240 kg Lhsdpfov Tklfjx Agrsp Functional Lifting capacity: 320 kg Working height: 3.250 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2080 m Max swing of arm in degrees: 180 Transport dimensions (LxWxH): 8,8x2,55x3,55 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2014 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320kg Swivel range: 180° Ground pressure: 56kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Support length: 4,87 m Own weight: 7.240 kg Driving license class: C1/3 Special features: Rotatable work basket yes, basket arm, rotation angle yes, WITHOUT roof protection, advantage: electricity connection in the basket, loading area with tail lifts, box body, enormous lateral reach, automatic setup and retraction, largest reach on 7.5t chassis Information: TÜV and UVV new

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Ledpfx Ashwhf Aogrohp With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2022, operating hours: 2,400 h, functionality: fully functional, overall weight: 845 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 5.9 m³/h, operating pressure: 11 bar, pressure (max.): 11 bar, noise level: 69 dB, type of cooling: air, Equipment: refrigerant dryer, type plate available, 2022 Kaeser ASD 60 T Sigma Air Compressor with Cordivari 900L Air Receiver Machine Type: 11 Bar Air Compressor with 900L Air Receiver Year: 2022 Run Hours: 2400 hrs Condition: Very Good German Precision, Energy Efficiency & Low Hours – Complete Air System For sale: 2022 Kaeser ASD 60 T Sigma Rotary Screw Compressor complete with a Cordivari 900L air receiver tank, in excellent condition with only 2,400 running hours. Engineered and built in Germany, Kaeser’s ASD series compressors are globally recognised for energy efficiency, durability, and quiet operation. This machine is perfect for workshops, production plants, and industrial environments that require reliable, continuous compressed air supply with minimal maintenance. ⚙️ Technical Specifications – Kaeser ASD 60 T Sigma Model: Kaeser ASD 60 T Sigma Year: 2022 Type: Rotary Screw Air Compressor with Integrated Refrigeration Dryer Drive Motor Power: 30 kW (40 HP) Operating Pressure: 7.5 – 11 bar (configurable) Free Air Delivery (FAD): Up to 5.9 m³/min (at 7.5 bar) Cooling Type: Air-cooled, integrated aftercooler Integrated Dryer: Yes – Kaeser “T” version with built-in refrigeration dryer Noise Level: Approx. 69 dB(A) Control System: SIGMA CONTROL 2 (advanced PLC-based management and diagnostics) Voltage: 400 V / 50 Hz, 3-phase Tank Included: Cordivari 900L air receiver (CE certified) Run Hours: Only 2,400 hours Dimensions (L × W × H): approx. 1,770 × 900 × 1,530 mm Weight: approx. 845 kg (compressor) Condition: Very Good – low hours, ready to work 🌟 Key Features and Advantages Extremely Low Hours – only 2,400 hours of use since new. Integrated Dryer – ensures consistently dry, clean compressed air for downstream machinery. Energy Efficient Sigma Profile Airend – reduces power consumption by up to 15% compared to conventional systems. SIGMA CONTROL 2 System – provides real-time monitoring, automatic load/unload cycles, and service interval alerts. Low Noise Operation (≈69 dB) – ideal for indoor workshop environments. Lhodpsxyt Swofx Agrsp Complete System – includes Cordivari 900L air receiver for stable pressure and reserve capacity. German Quality Engineering – built for continuous-duty industrial performance and long lifespan. Plug-and-Play Installation – ready for immediate use with minimal setup. 🧰 Applications Joinery and woodworking shops Engineering and fabrication workshops Manufacturing and production lines Automotive and spray finishing facilities General industrial compressed air systems Why Choose This Kaeser ASD 60 T System Top-tier German reliability and efficiency. Very low usage – only 2,400 hours from new (barely run-in). Includes Cordivari 900L receiver – complete, ready-to-use air package. Very Good condition. Available for viewing by prior appointment. Kaeser ASD 60 T Sigma for sale 2022 Kaeser air compressor Kaeser ASD 60 compressor specifications Used Kaeser compressor Ireland Kaeser ASD 60 T Sigma Control 2 Rotary screw compressor with dryer Kaeser compressor with air receiver Cordivari 900L air tank Industrial air compressor for sale Energy-efficient screw compressor Kaeser used compressor low hours Kaeser Sigma profile compressor Ireland Used Machine Tools Ireland compressors

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, clamping force: 350 kN, screw diameter: 28 mm, injection pressure: 1,577 bar, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 35M injection moulding machine. The 30 & 35 machines are a rare find on the used market as they offer a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 55.8 (PS)g. Lhedpfx Aexxlmdjgrsp Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany Lhedpswag Riofx Agrep

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Lodjxllxaspfx Agrshp Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2016, lifting height: 19,850 mm, fuel type: diesel, color: yellow, Weights Empty weight: 3.440 kg Functional Lifting capacity: 230 kg Working height: 2.185 cm Working width: 220 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1690 m Max swing of arm in degrees: 185 Transport dimensions (LxWxH): 6,93x2,2x2,99 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TBR 220.1 Year of build: 2016 Condition: Used Data: Max. working height: 21,85 m Max. platform height: 19,85 m Max. reach: 16,90 m Total dimensions LxWxH: 6,93 x 2,20 x 2,99 m Platform dimensions LxW: 1,41 x 0,69 m Max. basket load: 230 kg Swivel range: 2x 225° Lodpfexx Iv Iox Agrohp Ground pressure: 31 kN Ground clearance: 0,16 m Support width vertical: 2,20 m Support width one side: 2,93 m Support width both sides: 3,66 m Support length: 4,16 m Own weight: 3.440 kg Total permissible weight: 3.500 kg Special features: Rotating work platform 2x 85°, boom arm rotation angle 185°, enormous reach, setup inclination up to 5°, automatic retraction and setup, socket in the work platform. Information: Tüv und UVV new Location: 41468 Neuss immediately available

Year of construction: 2001, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed Ljdswudhnopfx Agrohp 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 5,250 mm, workpiece height (max.): 40 mm, total width: 1,445 mm, edge thickness (max.): 12 mm, total height: 1,600 mm, overall weight: 1,550 kg, type of input current: three-phase, input voltage: 400 V, power: 12 kW (16.32 HP), input frequency: 50 Hz, product height (max.): 40 mm, 2017 EBM KDP 117 SLK-P Edgebanding Machine Machine Type: Edgebanding Machine Year: 2017 Condition: Very Good Precision German Engineering – Complete Edgebanding Solution For sale: 2017 EBM KDP 117 SLK-P Automatic Edgebanding Machine in very good condition. Built for precision, durability, and efficiency, this professional edgebander provides perfect edge finishing for panels in wood, MDF, and laminate. Ideal for kitchen, furniture, and joinery manufacturers, it combines high-frequency trimming, pre-milling, and finishing aggregates for consistent, high-quality results. ⚙️ Equipment and Features Pre-milling aggregate (200 Hz) with DIA tooling included – ensures perfectly clean panel edges. Quick-melt glue pot (maintenance-free) – 6-minute preheat, automatic glue feed, synchronized or counter-rotation modes, and self-cleaning stirrer. Tape table with strip magazine – for thick edge banding material. Pneumatic roll trimmer – trims edges up to 3 mm thick with clean accuracy. Workpiece distance control lamp – for precise feeding and safe operation. HF combined router station (300 Hz) – high-frequency trimming with perfect corner transitions. Safety hood locking – opens only after end-trim saw comes to a complete stop. HF top/bottom trimming station (300 Hz) – smooth top and bottom finishing. Second top/bottom trimming station – for finer post-processing. Corner chamfering router – for 3D edge corner rounding. Radius scraper – ensures seamless edge transitions. Surface scraper – removes glue residues and imperfections. Buffing station – final polishing for high-gloss edges. Electronic converter – stable speed control for all high-frequency units. Transport chain and double roller top pressure beam – consistent panel feed with perfect alignment. Integrated catch-up container – collects excess edge banding material. Extendable panel support fence – supports large or wide panels. Ø 140 mm dust extraction outlet – efficient chip and glue removal. Ergonomic control centre – PLC touchscreen interface for easy programming and operation. AMD Fiulair Air Dryer 📐 Technical Data Model: EBM KDP 117 SLK-P Year: 2017 Max. Edge Thickness: 3 mm / 8 mm / 12 mm Workpiece Height (min./max.): 10 mm / 40 mm Min. Workpiece Length: 200 mm / 300 mm Min. Workpiece Width: 80 mm Feed Speed: approx. 10 m/min Ready for Operation: in approx. 6 minutes Power Consumption: 12 kW Electrical Connection: 415 V – 50/60 Hz Work Table Height: 880 mm Dimensions (L × W × H): 5250 × 1445 × 1600 mm Weight: approx. 1550 kg Condition: Very Good 🪚 Key Advantages High-performance German design – engineered for precision and longevity. Fast warm-up time (6 minutes) – ready for production quickly. Full edge processing system – from pre-milling to buffing, in one machine. Touchscreen control panel – intuitive operation and fast setup. Perfect for ABS, PVC, veneer and solid wood edging. Compact footprint – fits efficiently into modern production lines. 🧰 Ideal For Furniture and cabinet production Kitchen and office panel manufacturers Custom joinery workshops Panel edge finishing and refurbishment lines Why Buy This 2017 EBM KDP 117 SLK-P Complete edgebanding line from pre-milling to polishing Very good condition Lhjdpfx Ajxyt D Hjgrop Includes premium aggregates and touchscreen PLC control Available for inspection by prior appointment

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Lsdpfxswhkf Ho Agrjhp

Condition: used, Year of construction: 2014, Okamoto OGM-250UDXB including accessories External and internal cylindrical grinding machine Ledpfoxw N Tfox Agrohp Very good condition! max. swing diameter: 220 mm max. point width: 500 mm max. grinding diameter: 200 mm Max. workpiece weight (between centers): 60 kg Grinding wheel: 305 mm diameter x 25 mm width x 127 mm bore number of revolutions: 2087/2357 rpm Maximum peripheral speed: 33 m/sec Travel: X-axis: 203 mm, Z-axis: 640 mm Headstock swivel range : +/-30 ° Headstock feed speed: 1000 mm/min electric handwheel: 0.001 / 0.01 mm Sparking: 0-10 seconds/strokes Table axis swivel range: +4°/-9° maximum table speed: 50-4000 mm/min Delivery in no time: 7,5 mm Workpiece spindle head: Mounting cone MK3, spindle bore 14 mm, Workpiece spindle head speed (3 stages): 150/250/400 rpm Workpiece spindle head swivel range: +30° / -90° Tailstock quill stroke: 20 mm tailstock mount: MK3 Grinding spindle power: 1,5 kW Workpiece spindle power: 0,4 kW Table drive: 0.4 kW (AC servo motor) Headstock: 0.4 kW (AC servo motor) Internal grinding device: 0,75 kW Power supply: 7 kVA Setup dimensions: 2880 x 1851 x 1640 mm mass: 1900 kg max. point width: 500 mm max. grinding diameter: 200 mm Max. workpiece weight (between centers): 60 kg Grinding wheel: 305 mm diameter x 25 mm width x 127 mm bore number of revolutions: 2087/2357 rpm Maximum peripheral speed: 33 m/sec Travel: X-axis: 203 mm, Z-axis: 640 mm Headstock swivel range : +/-30 ° Headstock feed speed: 1000 mm/min electric handwheel: 0.001 / 0.01 mm Sparking: 0-10 seconds/strokes Table axis swivel range: +4°/-9° maximum table speed: 50-4000 mm/min Delivery in no time: 7,5 mm Workpiece spindle head: Mounting cone MK3, spindle bore 14 mm, Workpiece spindle head speed (3 stages): 150/250/400 rpm Workpiece spindle head swivel range: +30° / -90° Tailstock quill stroke: 20 mm tailstock mount: MK3 Grinding spindle power: 1,5 kW Workpiece spindle power: 0,4 kW Table drive: 0.4 kW (AC servo motor) Headstock: 0.4 kW (AC servo motor) Internal grinding device: 0,75 kW Power supply: 7 kVA Setup dimensions: 2880 x 1851 x 1640 mm mass: 1900 kg max. swing diameter: 220 mm

Condition: used, WEBSTER & BENNETT EH 72” ELEVATING RAIL VERTICAL BORER MAKE WEBSTER & BENNETT MODEL EH 72” TABLE DIA 1850 mm SWING 2150 mm HEIGHT UNDER RAIL 1200 mm SPEED UP TO 83 rpm FEED RATE 0.004-0.875 inch/min PLUS UPGRADED WITH BALL SCREWS 2 AXIS DIGITAL READ OUT MIMIK COPYING ATTACHMENT Lsdpfxjxt Hybs Agrshp ELEVATING RAIL SET OF JAWS SET OF TOOL HOLDERS COLUMN MOUNTED MOTOR

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) Lsdpfx Agsu Ix Hderohp *

Condition: used, Year of construction: 2012, Horizon HT-30C Three-Knife Trimmer, used Lodpsxbdazofx Agrehp The Horizon HT-30C is an innovative and efficient three-knife trimmer specifically designed for the small-run and print-on-demand book market. Key Features: - Color touchscreen for easy operation and automatic settings - Fully automated job setup and quick changeover times - Precise cutting quality through servo motor-controlled knife positioning - Hydraulically controlled clamping and cutting pressure for mark-free trimming - Capability to continuously process books of varying thickness - Compatible with nearline binding machines like the Horizon BQ-270V for complete book production Technical Specifications: - Untrimmed book format: 148 x 200 mm to 320 x 320 mm - Trimmed book format: 145 x 200 mm to 303 x 303 mm - Cutting thickness: 1 - 51 mm - Production speed: Up to 500 books per hour - Storage capacity: Up to 200 recurring jobs All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 2,600 mm, total height: 2,050 mm, total length: 1,700 mm, working width: 1,370 mm, grinding width: 1,370 mm, overall weight: 2,800 kg, grinding height: 160 mm, power: 18 kW (24.47 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 18 mm/s, grinding belt length: 2,200 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,370 mm, table height adjustment: 157 mm, table length: 2,600 mm, table width: 1,370 mm, extraction nozzle diameter: 150 mm, power of feed motor: 750 W, input frequency: 50 Hz, input voltage: 400 V, operating pressure: 6 bar, pressure: 6 bar, transport length: 1,700 mm, transport height: 2,050 mm, workpiece width (max.): 1,370 mm, transport width: 2,600 mm, Steton LCS1370 Wide Belt Sander Machine Type: Wide Belt Sander for Woodworking Year: 2019 Format: 2N RKRT (Two belts) Condition: Very Good Lsdpjxytp Njfx Agrehp Italian Precision & Power – Dual-Belt Calibrating & Finishing Sander For sale: 2019 Steton LCS1370 2N RKRT Wide Belt Sander, in very good condition. Built in Italy by Steton S.p.A., this professional twin-belt sanding system is designed for high-accuracy calibration and fine finishing of solid wood, veneers, and composite panels. The 2N RKRT configuration combines a steel roller for calibration and a rubber roller with sectional pad for high-grade finishing — ideal for furniture, door, and interior component production. ⚙️ Technical Specifications – Steton LCS1370 2N RKRT Model: LCS 1370 2N RKRT Year: 2019 Type: Dual-head wide belt sander (calibration + finishing) Working Width: 1,370 mm Min/Max Workpiece Thickness: 3 – 160 mm Abrasive Belt Size: 1,370 × 2,200 mm Feed Speed: 4.5 – 18 m/min (variable) First Head: Steel roller for calibration Second Head: Rubber roller + sectional electronic pad Roller Diameters: 160 mm (steel) / 140 mm (rubber) Main Motor Power: 15 kW (≈ 20 HP) per head Feed Motor Power: 0.75 kW (1 HP) Table Lift Motor: 0.55 kW Suction Outlet Diameter: Ø 150 mm × 3 Working Air Pressure: 6 bar Total Installed Power: 18 kW Machine Dimensions (L×W×H): 2,600 × 1,700 × 2,050 mm Net Weight: approx. 2,800 kg Condition: Very good 🌟 Key Features and Advantages Two Independent Sanding Units: Calibrating roller and electronic-pad finishing head for high accuracy and smooth surface quality. Electronic Sectional Pad System: Provides automatic pressure control for veneered or delicate panels. Variable Feed Speed and Belt Control: Inverter-driven feed belt and abrasive speed ensure consistent results on any material. Automatic Table Positioning: Micrometric adjustment and electronic readout for quick, precise setup. Steton Mechanical Belt Oscillation System: Patented oscillation system works without compressed air, reducing energy consumption. Heavy-Duty Frame Construction: Rigid steel body ensures long-term stability and vibration-free performance. 🧰 Applications Wood and veneer calibration Fine finishing of MDF, chipboard, and composite panels Furniture and cabinet manufacturing Interior door and panel production Why Choose This Steton LCS1370 2N RKRT Made in Italy – precision design with industrial-grade reliability. Dual-head configuration handles both calibration and finishing in one pass. Very good condition. Ideal for high-volume joinery and furniture manufacturing. Available for viewing by prior appointment. Steton LCS1370 2N RKRT for sale 2019 Steton wide belt sander Steton LCS series specifications Used Steton wide belt sander Ireland 2N RKRT calibrating finishing sander Dual-head wide belt sander for wood Steton woodworking machinery Italy Used wide belt sanders Ireland UK Steton LCS1370 in very good condition Used Machine Tools Ireland Steton

Condition: used, Year of construction: 2013, Horizon Booklet Production Line SPF-200L, FC-200L, Used The Horizon booklet production line featuring the models SPF-200L, FC-200L, is a state-of-the-art, modular solution for the efficient production of saddle-stitched booklets – including A4 landscape format. The system is suitable for both offset and digital printing and is especially designed for small to medium print runs. Thanks the Booklet maker (SPF-200L), and front trimmer (FC-200L), the line offers maximum flexibility and productivity in post-press processing. Lsdexb Tn Ispfx Agrjhp Special Features - Automated Settings: All format and production parameters are automatically set via a large, intuitive color touchscreen – including fold roller gap. - A4 Landscape Capability: The SPF-200L enables the production of booklets in A4 landscape format, making it particularly versatile. - High Speed: Up to 4,000 booklets/hour for stitching (3,500 in landscape format). - Flexible Configuration: Can be combined with additional Horizon feeders and digital print feeders for hybrid production lines. - Versatile Formats: Processes formats from at least 148 x 120 mm up to a maximum of 610 x 350 mm (SPF-200L). - Robust Wire Processing: Various stitching heads available for different wire gauges and loop stitching. - Easy Operation: Large touchscreens on all main modules for rapid setup and error diagnosis. Technical Specifications - SPF-200L Format Range (min-max): min. 180 x 105 mm, max. 610 x 350 mm - SPF-200L Speed: up to 4,000 cycles/h (3,500 cycles/h landscape) - SPF-200L Features: A4 landscape, fully automatic - FC-200L Format Range (min-max): Front trimmer, integrated - FC-200L Features: Final trimming - Booklet Thickness: up to 100 pages (depending on paper) - Weight SPF-200L with FC-200L: approx. 831 kg - Machine Dimensions SPF-200L with FC-200L: 4,271 x 810 x 1,250 mm (L x W x H) - Power Supply: 230 V, 5.3 A; 1.0 kW (SPF-200L) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.