Corner cleaners buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ssz0gc FRAVOL RAPID RX7 Edgebander with Corner RoundingAutomatic strip & coil feed magazine with Heavy Duty 3 mm PVC guillotine; Teflon coated Hot Melt glue pot, glue applicator roller, dual digital thermostats. --Pressure section with (1) large dia. drive roller & (3) pneumatic pressure controlled idle rollers, horiz. adj. w/digital [...]: -- Double end trims motors travel on 45° slides; tiltable from 0° to 15°. -- Top & Bottom flush trims, with digi... more
1

Corner Notchers BOSCHERT LB 15 225mm x 225mm x 6mm Hydraulic Corner Notcher

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1979
ready for operation (used)
Serial No. 201 B27s97nc Capacity 225 mm x 225 mm x 6 mm Table size 950 mm x 800 mm Input 380/3/50 4 kw Actuated via Wander type foot switch Fitted with 2 x adjustable work guides Length 3' 8" / 1117mm Width 3' 10" /1168mm Height 6' 4" / 1930mm Nett weight actual. 1580 Kgs (1.56 Tons) more
4
Vacuum cleaner, vacuum cleaner, dust collectors, industrial vacuum cleaners, wet vacuum Qkqgg02lv Port 220 volt stainless steel container for suction of liquids Performance 1400 Watt Weight 25 kg more
6
Hydraulic corner connection press with retractable abutment and pad arms Width: 140 mm Cutting stroke: Max 15 mm Baj3vegm7w Cutting height: 112 mm Weight: 520 kg more
3
Nfjjj Second hand TEGLE Milling machine for parallel corner locking - Model TKSF 1 - Foot activatet - Pneumatic hold - Mach. nr. 33479 more
1

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) I M A ADVANTAGE 500 L

North Carolina, United StatesUnited States dealership location
518 km
2010
used
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bccsm2ssht IMA Advantage 500 L Single sided Edgebander With Doucet Return ConveyorBasic Specifications:Edgebanding capacity, 0.3 - 3 mm; (0.012 - 0.118"), panel thickness min/max 8 - 60 mm (0.315 - 2.362").Equipped With: -- Pre-Milling Unit 08.379, with kW 4 x 2 (HP 5.3 x 2) vertical joining spindles, with SIKO digital readouts, particle & debris air jet blower. -- Glue System with "quick-look" system that can be apply hot-melt glue or PUR. -- Pressure... more
3

Corner Notchers IMAC 250mm x 250mm x 3mm Corner Notcher

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 90131/3FA/4 Capacity 250 x 250 3 mm Table size 770 mm x 600 mm Bcif9utx8g Input 415/3/50 3kw approx Actuated via wander type foot switch Fitted with 2 x work guides Length 3' 8" Width 2' 8" Height 3' 8" more
5
Vacuum cleaner, vacuum cleaner, dust collectors, industrial cleaners, three-phase cleaner Port 380 Volt tank volume l Power 3 KW Wjyhedshc Dimensions 760/750/H1290 mm Weight 96 kg more
2

Corner round cutter Krause Y6RF-56

Nürnberg, GermanyGermany dealership location
6749 km
good (used)
Corner round cutter Traenklein EK Serial-No. 306286 Working high max. 100mm Gqciuhobo -Available Immediately - -can be inspect- -on stock - can be test- more


corner cle...
daily

New machines via email!

Stay updated!
2
Bcsmtkho8e Corner cleaning machine - Min./max. pressure 6/10 bar more
6
Hydraulic corner connection press with retractable abutment 9t32g7eid more
1
Elect./Voltage: 208/240/480 V, 60 Cy, 3 Ph Bcnguroqbi BRANDT "OPTIMAT KDN 350/C" SINGLE SIDED EDGEBANDER 0.4 - 8 mm (5/16") Edge cap., panel thickness 5/16" - 1-9/16", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width. -- Line control (NO limit switches) for workstation function. - Automatic height adjustment with top pressure beam for all workstations, equipped with digital height indicator. -- "PC-16" Program Control with: 7-1/2' VGA screen, 8 MB IDE flash disk, 8 MB RAM, ... more
6
Second-hand machine Year of construction: 2001 Condition: Machine produced to the last Equipment and technical data: Adjustable infeed fence Jointing cutter with 2,2 kW motors Roll and strip magazine Quickmelt Verleimen power pack with glue roller 4 pressure rollers, 1 running to specified drives, 3 pneumatically adjustable end-trimming unit Vrikni Chamfer milling unit, sampling, angle-adjustable RADIUS milling unit, sampling, angle-adjustable Contour trimming unit Scraping... more
5
Vacuum cleaner, vacuum cleaner, dust collectors, industrial cleaners, three-phase cleaner 88fqzta09 Port 380 Volt tank volume l Power 3 kW Dimensions of 770/850/H1780 mm Weight 137 kg more
10

Corner crimper Anton System EVM 250

Ostrożne, PolandPoland
7229 km
1994
excellent (used)
Bcrstrfy07 Corner crimper Working mode hydraulic - pneumatic more
6

Double-Corner Rounding Machine Hunkeler D-ES-P

Nürnberg, GermanyGermany dealership location
6749 km
1985
good (used)
Double-Corner Rounding Machine Hunkeler D-ES-P Year 1985 - Serial-No. 50723/18 -Available Immediately - Cxedmnvl -can be inspect- -on stock - can be test- more
6

"Corner rounding machine" ARMINIUS "ST 16"

Klipphausen, GermanyGermany dealership location
6821 km
1991
used
"Corner rounding machine ARMINIUS ST 16 Aggregates entirely: 2 Moulding aggregates: 1 Sanding aggregates: 1 Tracing device: Yes Profile sanding disc: Yes Operating status: still in production use Xrwrqcken Condition: good" more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bcbesszsn2 HOLZ-HER 1321 Sprint Edgebander with Pre-Milling & Corner Rounding. 0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip).General Specifications: -- 6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and [...] can b... more
6

Belt conveyor corner Bürkle KTR

Petershagen, GermanyGermany dealership location
6478 km
1990
used
Manufacturer: Hackemack Transportkurve, Type: KTR, Year: 1990, Outer radius mm: 9000, Center radius mm: 4500, Bandtransport: yes, Working lenght min mm: 10000, Working hight mm: 980, Feeding speed max m/min: 5-30, Engine power kW: 4, Bandbreiteb 1700, Year :1990 Q8zbpzve2 more
5
Vacuum cleaner, vacuum cleaner, dust collectors, industrial vacuum cleaners Connect 240 volt tank volume l KW performance 4.43 Dimensions 700/750/H1330 mm Weight 78 kg 88frmvmdb more
12
Hydraulische Eckverbindungspresse Anton System Bcrqx70tuv more
2

Corner round cutter Polygraph Y6R (711066/110)

Nürnberg, GermanyGermany dealership location
6749 km
good (used)
Corner round cutter Polygraph Y6R Bcnq3ckw9t Serial-No. 711066/110 -Available Immediately - -can be inspect- -on stock - can be test- more
6

Wegoma L2 Pvc Corner Welding Machine Wegoma L2

Mont-Saint-Guibert, BelgiumBelgium dealership location
6275 km
used
 Pvc Corner Welding Machine Brand: Wegoma Model: L2 Year: Unknown Voltage: 380 V three-phase Dimensions: 385 cm x 70 cm x 195 cm Condition: tested Disassembly and loading are the responsibility of the buyer. This item is to be sold via online auction on Auctelia Clqnqin more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bb79rbeasz BRANDT KDN 650 C SINGLE SIDED EDGEBANDER0.4 - 8 mm (5/16") Edge cap., panel thickness 5/16" - 1-9/16", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. -- Automatic height adjustment with top pressure beam for all work station, equipped with digital height indicator. -- PC-16 Program Control with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote... more
4

Round corner machine Beier UER/F

Grevenbroich, GermanyGermany
6385 km
1988
good (used)
Beier UER/F; Stand device; good condition; Foot operation; Knife 7mm. Cjnxjyl3 more
5
Corner connection machine, corner connector press, corner connection press, corner connector machine 3l90puxx -sold as spare parts Corner connection press to the connect of aluminium profiles Foot switch -Pneumatically driven -Gluing station -versenkbares abutment dimensions press 1200/1200/H1450 Klebestation700/600/H1800 mm dimensions mm Weight 780 kg more
1
Manufacturer: Brandt Eckenkopiergerät, Type: FP 10, Edgeband thickness max mm: 3, Edgeband height max mm: 55, Working widht max mm: 80, Kopierfunktion single sided: yes, Tracing by roller: yes, Cycle time automatic: yes, Engine milling kW: 0,5, Compressed air bar: 6, Wight approx. kg: 150, Na77r0cic more
1

Corner round cutter Polygraph Y6R (246692)

Nürnberg, GermanyGermany dealership location
6749 km
good (used)
Corner round cutter Polygraph Y6R Serial-No. 246692 Bcnq2yzrls -Available Immediately - -can be inspect- -on stock - can be test- more
4

Corners round device Krause

81477 München, DeutschlandGermany
6849 km
ready for operation (used)
Well of preserved Eckenrunder by Krause, multiple radii and a slotted tool are included. Available immediately. Like, it can be tested in the camp. Gpysw9ds8 more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Glyq3xwni HOMAG KLK79/A20/S2 Edgebander with Pre-Milling and Corner Rounding -- 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 7.8" Workstations: -- Pre-Mill Station to clean the edge of the panel prior to applying the Edge Strip. -- Quick pre-melt glue pot, -- Pressure zone with (7) pressure rollers, -- End trims, -- T & B rough trim , --T & B Fine trim profile. -- 4-motor Corner Rou... more
7
Bctgvzdxvu Universal corner cleaning machine URBAN - ZIERKE 7405. Year 2010 Can clean angles between 20 - 180 degr. more
5
International voltage -2 x end mills -6 x Schleiffteller Qlb9oau9l -2 x profile milling cutters more
6
Second-hand machine Year of construction: 2008 Status: In production Equipment and technical data: Trimming unit with 2 [...] ückten milling heads Glue long basin which includes glue application role Removable glue basin Compound miter saw Nacmb Combi-unit pneumatic deliverable Corner copying unit RADIUS scraper Surface scraper Location: Thuringia Availability: Summer 2018 more
6

DIE Cutter DoubleCorner Rounding Machine Kolbus EP (271)

Nürnberg, GermanyGermany dealership location
6749 km
1971
good (used)
DIE Cutter DoubleCorner Rounding Machine Kolbus EP Year 1971 - Serial-No. 271 Nevxl -Available Immediately - -can be inspect- -on stock - can be test- more
3

Round corners manual Wolter Maschinenfabrik Nr. 2660

Kronsbrink 29, 32423 Minden, DEGermany
6478 km
1990
ready for operation (used)
The device is in working condition. Gfoe2jj8g Price from location, delivery after agreement more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ncdbn HOMAG KAL 310/6/A3/S2 Edgebander with Pre-Milling & Corner RoundingWorking Capacity:0.4 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 12 - 65 mm; Feed speed variable up to 18 to 24 MPM (59 to 79 FPM).Equipped with: -- Pre-Milling Unit: 2 x 3 kW, 9,000 RPM motors, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence. -- Pre-Heating Unit: With quartz lamps for heating the sub... more
15
CNC corner cleaner Stuertz 2AS-JS with turning station SE-DO-1/290. Year 2007 Direction Right - Left Machine in good condition Dal93bd Programmed on Aluplast and Schuco more
5
Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer here a used U - starting-up protection to the purchase. The stand guards can turn through lateral to the frame to be used to a column width of 100 mm. Included in the scope of delivery: 01 x u starting-up protection, used Material color: yellow Total height: approx. 410 mm Total depth: approx. 325 mm Outer width: approx. 145 mm Internal width: 134 mm Schenkelabm.: approx. 105 x ... more
3
Corner round cutter Polygraph Y6R Serial-No. 711065/031 Cuybjf3 -Available Immediately - -can be inspect- -on stock - can be test- more
4

Belt conveyor corner Venjakob Gurtbandkurve

Petershagen, GermanyGermany dealership location
6478 km
1995
used
Manufacturer: Venyeskob, Type: Gurtbandkurve, Year: 1995, Outer radius mm: ca 4000, Inner radius in mm: ca 2500, Outer diameter mm: ca 8000, Belt transport: yes, Working hight mm: ca 980, Year :1995 8z3zt9 more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Ncdbd OTT UNIMATIC, ... Edgebander with Corner Rounding:Working Capacity, 0.4 - 20 MM (3/4"), panel thickness up to 2-1/4" (60 mm), minimum panel length 6" (150 mm), minimum width 2-3/4" (70 mm). Equipped with: -- Programmable PLC control unit to program & set machine functions for automatic recall & operation. -- OTT Hot-Melt Glue System designed for quick change EVA glue tanks. -- Automatic Edge Magazine for Coil Edgebanding and Solid wood strips. ... more
2
CNC corner cleaner with 2 interpolating axes for a complete finishing of corners of uPVC window frames. Bcpvkh2yji more
5
Vacuum cleaner, vacuum cleaner, dust collectors, industrial vacuum cleaners Urhyns7 Connect 240 volt tank volume l KW performance 4.43 Dimensions 700/750/H1330 mm Weight 78 kg more
5
Your contact person in our home: Mr: André evening Mr: Marcel Brahms Bcpzzjqeyi Mr: Simon blank We offer here a used U - starting-up protection to the purchase. The stand guards can turn through lateral to the frame to be used to a column width of 100 mm. Included in the scope of delivery: 01 x u starting-up protection, used Material color: yellow Total height: approx. 410 mm Total depth: approx. 325 mm Outer width: approx. 145 mm Internal width: 134 mm Schenkelabm.: ap... more
5

Corner round cutter Polygraph Y6R

Nürnberg, GermanyGermany dealership location
6749 km
good (used)
Corner round cutter Polygraph Y6R Serial-No. 711065/031 -Available Immediately - K9zxq7qgw -can be inspect- -on stock - can be test- more
4

Belt conveyor corner Tranportkurve u

Petershagen, GermanyGermany dealership location
6478 km
1995
used
Manufacturer: Tranportkurve, Year: ca.1995, Outer radius mm: 6600, Inner radius in mm: 3450, Belt transport: yes, Feeding speed max m/min: 5-15, Feeding speed min m/min: ca.2, Year :ca.1995 Bcsqa9yfju more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3d3m2y9 SCMI K 203-ER EDGEBANDER WITH CORNER ROUNDING13/64" (5 mm) Max. edge cap. (Optional upgrade 8 mm) for strip feeding, 1/8" (3 mm) for coil feeding; 65 mm min. panel width and 140 mm min. length, panel thickness 8 - 55 mm. -- Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), 3 mm cap. guillotine, 3-roll pressure unit w/pneumatic control. -- Workstations: Double motor front & rear end trim mounted ... more
5

Corner Cleaning Machine ROTOX EPA 275

Staufenberg, GermanyGermany dealership location
6563 km
1984
good (used)
Corner cleaning machine Fabr. ROTOX type EPA 275 Fabr.# 275-680 built in 1984 for the deburring of the welds of welded plastic frame Technical data: Spindle 30 mm for the recording of 2 milling sets Changing cutters automatically via push-button Feed and pneumatic height adjustment Air pressure max. 8 bar Electr. Connection 380 V, 50 Hz, 3.1 in good condition more


corner cle...
daily

New machines via email!

Stay updated!

to

to

Edit search
CORNER CLEANERS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close