Cnc corner cleaner buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 400 c, 50-60 Cy, 3 Ph Ncffr WEGOMA WP 4AS Corner Cleaning CNC Machine; -- CNC 4-axis machine designed for cleaning the weld beads on 90 deg. inner and outer corners of plastic window sections automatically. -- The programmable machine interface and display is controlled by a STURTZ interactive CNC processor. Easy to opearate Teach-In programming and automatice profile recognition. -- Equipped with: Grooving knife for top/bottom; Internal corner cleaning knife for top/bott... more
15
CNC corner cleaner Stuertz 2AS-JS with turning station SE-DO-1/290. Year 2007 Dal93bd Direction Right - Left Machine in good condition Programmed on Aluplast and Schuco more
15
Combined line: CNC welder (Q4) and CNC corner cleaner (BFP). Also including: CNC freesmachine SOENEN DEM! Immediately available! Ce2wgihc Disassembly and transport by buyer Region ; Belgium - Brugge more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Vuw7qbu Fully Automatic Corner Bead Cleaner with automatic turning station and inner corner cleaning capabilities. -- Technical specifications: Max. profile size 160 x 150 mm, min profile size 30 x 30 mm, frame size min. 320 x 320 mm, air consumption 200 l / min, air pressure 6 - 8 bar, connected load 2.2 kW, power connection 380 V, 50 Hz, weight approx. 900 kg -- Complete With: Automatic Profile Recognition, Profile Side Selectable, Electronic PLC Contr... more
4
corner cleaner CNC Rotox EPA 472 Bj .: 2001 No .: 6333, 10 tool positions, contour milling disc Cut off unit for radius or bevel above and below, drilling units top and bottom, turning station from right to left, set on Veka SL 70 + 82 Bct32csfqa Programming on other profiles possible. Machine can also be used without turning station Completely overhauled and ready to use, without warranty more
6

Corner Cleaning Machine WEGOMA WP-IS-CNC

Unterreichenbach, GermanyGermany dealership location
6627 km
good (used)
Kwan7 WEGOMA corner cleaner WP-IS-CNC CNC-controlled 4-axis corner cleaning machine with free Programmable Computer control, Programming included in the price of 5 profiles overhauled, replaced defective parts, function checked more
6

Corner cleaning machine CNC Urban SV 494

Königsbach, GermanyGermany dealership location
6614 km
1999
good (used)
-Programmable CNC - control -4 axes -Inside and outside corner machining, radii and angles -Tools 4 from above: -Sticking knife -Indoor folding knife -Nutmesser -Drill Bavjulvjkl 4 tools from below: -Drill -Indoor folding knife -Nutmesser -Drill -Disk milling cutter for outside corner machining automatic turning station WT 485 more
4
Corner cleaner for corners with radus Iqfmcij more


cnc corner...
daily

New machines via email!

Stay updated!
4

Corner Cleaner URBAN SV 400 S

More Urban Sv 400
Unterreichenbach, GermanyGermany dealership location
6627 km
used
URBAN Corner Cleaner SV 400 S For PVC profiles, at an angle of 90 ° incl. Parting knife for profile top and bottom, Processing of the profile outer corner. With automatic profile insert. 1 Inner corner machining aggregate consisting of: 1 Sealing groove milling / drilling unit Inner folding knife for visible edges and Bbcks2wmjn Glazing bead adjustments to frame. Without milling cutter. only frame overhauled, function tested more
5

Corner Cleaner WEGOMA WPA2 (MPA2)

Unterreichenbach, GermanyGermany dealership location
6627 km
used
WEGOMA Corner Cleaner WPA2 (MPA2) automatic grooving (top and bottom) and outer corner milling 2 cutterset places overhauled Lfi0lwysg more
1

MACHINING CENTER - CNC (VERTICAL) ELDORADO M90-0027

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: Bbu7wruygj ELDORADO #M90-0027 "MEGA 75" Deep Hole Gun DrillsSpecifications:Spindle Speeds, Infinite Range 1455 To 11740 RpmFeed Range, Infinitely Variable .100 To 99.9 Ipm(2) Spindle Motors Horsepower 3 Hp EachCoolant System Capacity 90 GallonsCoolant PressureTo 1500 PsiCoolant Flow RateTo 18 GpmCoolant Dimensions, L X W 75" X 32"Coolant Heigh t35"Note: This System Was Designed With Two SeperateDrills That Can Be Run Off Of One High-PressureCoolant [...] WITH:(2) M90-0027 Eldo... more
1
Turning length 1500mm Turning diameter 600mm Spindle speeds 35-3000 rpm Input 40 hp Bcyrvpxutm Fitted with 40 Automatic Tool Change more
6

CNC Lathe INDEX GE 42NC

More Index Ge 42
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
used
turning diameter 370 mm turning length 400 mm Bcavndofw8 control Philips weight of the machine ca. 3 t more
6

CNC Lathe DOOSAN PUMA MX 2100LST-GL

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2008
used
chucking diameter 210 mm Swinging diameter over bed 750 mm Swing diameter over bed cross slide 650 mm bar material dia. 65 mm turning length 1020 mm Main spindle (left) speed max. 5000 U/min Main spindle (left) Spindle passage 68 mm Main spindle (left) Drive power 22 kW Main spindle (left) Torque 318 Nm control Fanuc 31i - Model A spindle hours 25.388 h Bcy8toi2cz + Portal loading unit more
3

Deburring Machine manutec r15E CNC

Monheim, GermanyGermany dealership location
6403 km
2015
used
diameter mm workpiece length mm work piece width mm Machining segment consisting of covering and manutec robot r15E, for deburring of gear boxes and columns Axes 1 to 6 are rotary axes. The axes 1 to 3 are the basic axes, the axes 4 to 6 are the orientation axes for the für den gripper or the tool, respectively. All 6 axes can be moved simultaneously coordinated. Equipment/Accessories: Yrszmo - Tool station - 2 pallet places - Various spindles: ESR350 spindle with suspension spring and... more
6
max. workpiece diameter 440 mm threading length 4000 mm max. module 12 min. module 0,5 max. wheel diameter 440 mm gear width 4000 mm no. of teeth to be hobbed 3 - 300 mm max. swing diameter 600 mm Slide cross Axial = 4000 mm dist. cutter spindle - workpiece spindle 50 / 316 mm X9f02w8 diameter of hob 192 x 220 mm head swivability +/- 45 ° taper Morse 5 shifting 200 mm milling drive motor 22 kW hob turning speeds 80 - 340 U/min electrics - voltage/frequency 400 / 50 V/Hz control Sinumerik 8... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. B0hggld BIESSE STREAM B1 9.5 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Edge thickness cap. 0.01' - 0.8" (0.3 - 20 mm), min. panel width 2.5" (65 mm), panel thickness 0.4" - 2.4" (10 - 60 mm), min. panel length 6" (150 mm). Automatic (2) coil vertical feed magazine for coil material up to 3 mm thickness with automatic changeover. Patented glue system w/pre-melt, large separated granular hopper for easy filling & high gluing capacity,Reve... more
1
Table size 1460mm x 510mm Speeds 10,000 rpm Spindle taper BT40 Grt9hpp Automatic tool changer 24 Station more
3

CNC Lathe OKUMA Howa Act 2 SP 3

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 300 mm Bazo0ddmzh turning length 250 mm control OSP 5000 weight of the machine ca. 7 t more
6
Gb2bhhhx8 Punching force: 700 kN Throat: 760 mm Travel of the table: X-direction: approx. 1000 mm Y direction: about 740 mm With CNC controlled positioning table more
5
spindle diameter:130 mm x-travel:5600 mm y-travel:2500 mm z-travel:420 mm w-axis:900 mm Vqtrt3ihb spindle turning speed - stepless:5 - 1000 U/min spindle taper ISO:50 plate size:4000 x 2000 (2x) mm feed stepless:5 - 2500 mm/min rapid traverse:5 m/min control:Heidenhain TNC 355 total power requirement:70 kW weight of the machine ca.:40,0 t dimensions of the machine ca.:11,5 x 4,0(+ca.5,0) x 5,0 m Rotary-table:Tos -ISO 12 mm Rotary-table:2200 x 2200 mm powered rotary table:Achse 1500 mm Contro... more
1
Elect./Voltage: 2toqozu FANUC ROBODRILLL A-T14IA CNC Drilling & Tapping Center -- Table size 25.59" x 14.96" -- Maximum table load 440 Lbs -- Spindle nose to table top 5.9" - 17.71" -- X-axis travel 19.6" -- Y-axis travel 14.96" -- Z-axis travel 11.81" -- Rapid traverse rate X,Y & Z 1889 IPM -- Cutting feed rate 0.1 - 787 IPM -- Spindle speeds 80 - 8000 RPM -- Spindle motor 7.5 HP -- Spindle taper BT 30 -- Tool changer capacity 14 station ATC -- Weight approx. 6,000 ... more
1
Table size 840mm x 420mm Speeds 6000 Wxalo Spindle taper BT40 Input 7.5kW more
6

CNC Lathe Ouick Tech AT25 Smart

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2002
used
turning diameter 60 mm turning length 100/225 mm control Quick Tech Control-Mitsub x-axis 200 mm Bcoq0jlycz y-axis 335 mm z-axis 255 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2650x1450x1700 m more
6
CNC punching machine with a punching force of 1000 kN. Travel distance 1200 x 600 mm. Five different punching or shaping tools can be driven via the control. A drilling and a deburring unit is also installed, which can also be operated via the control unit. Drill holes from 10 to 40 mm and threads from M 12 to M 24 can be produced. With the deburring unit punchings up to 30 mm and holes up to 40 mm can be machined. Fpc8d9 The speed of the positioning can be adjusted variably. more
6

CNC Lathe INDEX GE 65

More Index Ge 65
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
used
turning diameter nominal ca. 175 mm control Siemens 810 D Total weight, approx. 3600 kg height 1800 mm turning speed range 45 - 4000 U/min work spindle diameter 110 mm spindle bore 80 mm Hp033fsgw hollow clamping cylinder Hub 35 travel of compound slide-rest Z - 400 mm travel of compound slide-rest X - 150 mm dia. of quill 55 mm quill stroke max. 60 mm tool holder 14 - complete retrofit in 2001 more
5
pressure 25 t throat 500 mm stroke 160 mm table surface area 800 x 500 mm ram head dimension 150 x 400 mm Uwwmtrxq2 table hole 10 x 520 mm dayligth 500 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 1 x 1,8 x 2,97 m Electric 380 Volt security controll Light barrier protective railing Two-hand and food triggering Machine was equipped 1998 with new CYBELEC-CNC-control DNC 50. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker... more
1
Elect./Voltage: 208 V Bbu7uo3q0c HAAS DT-1 CNC Drill Tap Center -- X travel 20". -- Y travel 16". -- Z travel 15.5". -- Table size: 26" x 15". -- Max. table load (evenly distrib.) 250 lbs. -- Spindle nose to table top 6" - 21.5". -- Rapid traverse rate all axes 2400 ipm. -- Cutting feed rate all axes 0.1 - 1200 ipm. -- Spindle speed 15,000 rpm. -- Spindle taper BT 30. -- Spindle motor 15 hp. -- Tool changer capacity 20+1 stations. -- Tool change time (chip to chip) 1.8 sec. --... more
1
Table size 2000mm x 510mm Speeds 10,000 rpm Spindle taper BT40 Fitted with 4th Rotary Axis Zf899dq more
6
turning diameter 610 mm Cmee0y8o turning length 3.060 mm control Mazatrol Fusion CNC 640 M swing dia. 610 mm workpiece weight flying, incl. clamping, max. 200 kg max. workpiece weight between centres 1.000 kg main spindle: Torque 1.200 Nm power capacity 30 kW spindle bore diameter 112 mm turning speed range 35 - 3.000 U/min travel -x axis 740 mm travel -z axis 3.060 mm travel -y axis 410 (+/- 205) mm travel -b axis -30 bis +210 / 0,0001 ° rapid traverse x/y/z 50 m/min feed speeds x/y/z axis ... more
6

CNC Lathe OKUMA LB9

More Okuma Lb 9
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1989
used
turning diameter 42 mm turning length ? mm Nezc2 control Okuma OSP 500 L-G weight of the machine ca. 5 t more
5

Key-Way Milling Machine - Vertical BUSCH NF1 CNC

Mönchengladbach, GermanyGermany dealership location
6371 km
1987
used
groove width:16 mm x-travel:1000/1500 mm throat:200 mm Fkytawfge y-travel:150 mm z-travel:150 mm spindle taper ISO:40 spindle motor:3 kW spindle turning speed range:300 - 3600 U/min quill stroke:150 mm diameter of quill:100 mm table surface area:1800 x 250 mm total power requirement:9,5 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:3,5 x 2,7 x 2,5 m CNC SIEMENS 810 M Indexing head with tailstock 4-fold toll changer table mounted more
2
Milling / boring machine to bench fixed RIVOLTA FBF 5000 2q3fme Year 1989 CN ECS 2301 renewed maintenance contract X: 5000 Y: Z 1500: 900 (Aries) Equipped with coolant pump high pressure through fingers of indexing very good condition more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbu7t20fsa HAAS MDC-1 CNC Drilling & Tapping -- Haas 32 32 Bit Control. -- X-Axis travels 20". -- Y-Axis travels 16". -- Z-Axis travels 15.5". -- Spindle motor 15 HP. -- Spindle speed 10,000 RPM. -- Dual pallet. -- Automatic tool changer positions 24. -- Table size 15" x 26". -- Spindle taper 40. -- Under 7000 spindle hours. more
4

CNC Vertical Turning Lathe Hitachi Seiki CS-20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1998
good (used)
Maximum turning diameter 350 mm. Ekdo2isdi Maximum swing 350 mm. Maximum spindle bore for bar work 59 mm. Spindle speed 30-5000 Rpm. Maximum turning length 150 mm. Number of tools on turret 12. Tool type VDI 40. CNC control Seiki Seikos Ʃ10L more
5
max. turning diameter:230 mm turning length:230 mm control: swing dia.:230 mm centre distance:700 mm Bcqfeszo0l bar material dia.:68 mm travel -x axis:Rev. 1+2:: 165/190 mm travel -y axis:Rev. 1 +- 50 mm travel -z axis:Rev. 1+2: 700 / 720 mm spindle turning speed - stepless:S1 / S2:5000 / 5000 1/min Turret No.1 stations / rotary tools:12/12 - 24/12 Pos. Turret No.2 stations / rotary tools:12/12 - 24/12 Pos. Driven Tools:5000 1/min rapid traverse X-axis:20 m/min rapid traverse Z-axis:40 m/min s... more
5
workpiece diameter:1200 mm workpiece weight: kg workpiece height:750 mm weight of the machine ca.:9,6 t engine output:22 kW S28esx Table 1.000 mm Max. working height 750 mm Wheel Ø 450 mm Max. grinding capacity 1.200 mm Wheel vertical travel 770 mm Wheel transversal travel 550 mm Wheel motor power 22 Kw Total weight 9,6 Tons CNC SIEMENS 810 Year 2000 Notes: RETROFITTED IN 2010 COMPLETE WITH : - MAGNETIC TABLE Ø 1.000 MM - WHEEL DRESSER - ELECTRONIC WHEEL BALANCING DEVICE - STATIC WHEEL BALAN... more
6

Machining centre HECKLER & KOCH BA 22 CNC

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1989
used
x-axis 650 mm y-axis 350 mm z-axis 200 mm S3oyz9 Interchangeable machining, 4th axis, chip conveyor accessories: all tool holders and machine vice more
2
Milling / boring machine to amount mobile RIVOLTA MEF 1000 Year 1983 CN ECS 2101 (contract renewed maintenance) X: 5000 Y: 1500 Z: 1000 (Aries) Equipped with coolant pump high pressure through fingers of indexing very good condition Bbmcqikvqb more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bcrffzgif2 BROTHER TC-S2C-O CNC Drill Tap Center -- X-Axis 27.6" -- Y-Axis 15.7” -- Z-Axis 11.8” -- Table size 31.5" x 12.6" -- Max table load 551 Lbs -- Spindle nose to table top: 7.1" - 18.9" -- Spindle speed 16,000 RPM -- Spindle taper BT30 -- Spindle motor 10 HP -- Tool changer 21 side mount ATC -- Rapid traverse rate: 1969 IPM -- Cutting feed rate 394 / 787 IPM -- Max tool length 9.8" -- Tool change time 0.9 sec -- Chip-to-ch... more
3

2 Axis Teach Inn/ Cyclecontr CNC Lathe Gildemeister Nef Plus 710

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1997
good (used)
Maximum swing over bed 710 mm. Spindle speed 3 steps. 16-180 Rpm /56-610 Rpm / 160-1800 Rpm. Centerheight 345 mm. Maximum turning length 2000 mm. CNC Control Grundig Manual Plus M8ugr more
13
Mori Seiki, horizontal machining center with Vorbereiteung on a spindle coolant. Model: SH 403 BJ: 2000 Bbx9nnfl8f x travel: 560 mm y travel: 510 mm z travel: 510 mm Control: Fanuc MSG 501 FANUC 18i spindle speed range: 12000 RPM Spindle motor: 22 kW Total power consumption: 56 KW Rapid traverse x/y/z: 42 m / min Pallet size: 2 x 400 x 400 mm Table load: 0.3 t b-axis: 0.001 ° 90° time: 2.0 sec Maximum processing diameter: 580 mm maximum workpiece weight: 500 kg maxim... more
6
faceplate diameter 1400 mm Bbmisiyeam swing diameter 1450 mm turning height 1630 mm max. workpiece weight 6300 kg reus 10 - 315 U/min cross rail adjustment - vertical 1250 mm max. ram stroke 1100 mm Control Siemens 840 D total power requirement 0 kW weight of the machine ca. 0 t dimensions of the machine ca. 4,35 x 2,85 x 5,1 m * general reconditioned and modernized in 2001 * CNC - control by SIEMENS SINUMERIK 840 D * chip conveyor machine wasnt in use in production since 2008 more
6

Drilling and Milling M/C ALZMETALL AC 28 cnc

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1991
used
bore capacity in steel (diameter) ? mm x-travel 450 mm y-travel 300 mm z-axis 180 mm weight of the machine ca. 1,4 t Mufo08 more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Hibp0fkr0 BROTHER TC-S2C-O CNC Drill Tap Center -- X-Axis 27.6" -- Y-Axis 15.7” -- Z-Axis 11.8” -- Table size 31.5" x 12.6" -- Max table load 551 Lbs -- Spindle nose to table top: 7.1" - 18.9" -- Spindle speed 16,000 RPM -- Spindle taper BT30 -- Spindle motor 10 HP -- Tool changer 21 side mount ATC -- Rapid traverse rate: 1969 IPM -- Cutting feed rate 394 / 787 IPM -- Max tool length 9.8" -- Tool change time 0.9 sec -- Chip-to-chi... more
6

CNCLathe with driven tools Mazak Super Quick Turn 200M x 1000

Campagneweg 10, NL-4761RM Zevenbergen, NLNetherlands
6233 km
2002
excellent (used)
Maximum swing: 525 mm Maximum turning diameter: 300 mm Maximum spindle bore for bar work: 51 mm Maximum turning length: 1048 mm Spindle speed: 35 - 5000 RPM Spindle motor: 18,5/15 KW (30 min./continue) Maximum torque on spindle: 350 nm Spindle speed driven tools: 25 - 4500 RPM Motor driven tools: 3,7 KW ((30 min./continue) Torque motor driven tools: 35 nm Number of tools on turret: 12x Number of driven tools: 12x Bb9h9lgsgq Tool type: Mazak VDI CNC Control: Mazatrol PC Fus... more


cnc corner...
daily

New machines via email!

Stay updated!

to

to

Edit search
CNC CORNER CLEANER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close