Used Corrugated Nailers for sale (330)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Stock laminating machine Type: 134R5-1500 P Year: 2001 Max. sheet size: 1420x1620 mm Min. sheet size: 500 x 500 mm Printing sheet: Paper from approx. 180 g/m² Cardboard from approx. 400 g/m² Carrier sheet: Corrugated board up to approx. 7.0 mm thickness Hsdpfxjyhn Dfs Ag Iei Cardboard/solid board from 0.6 mm

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Hsdpfx Ajuhm E Seg Iei Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. Hsdpfx Asyl Rzusg Ioi High knives, in very good condition. Weighs over 400 kg

Condition: excellent (used), functionality: fully functional, Pneumatic stapler. Hsdpfx Aex U Dpfog Iei - The automatic nailer pneumatically presses fastening elements onto the bottom of the mouldings - The clamping pad automatically adjusts to the height of the workpiece - Fastening elements are supplied on coils of 10,000 to 20,000 pieces (depending on size) - 200 to 300 complete frames per hour (depending on size) - Nailer type NR (two boxes of 12 mm fasteners included) - Overall dimensions approximately 96 x 61 x 122 cm and weight approximately 95 kg.

Condition: new, Year of construction: 2025, type of input current: three-phase, total height: 800 mm, total width: 2,093 mm, total length: 3,400 mm, overall weight: 3,200 kg, working height: 11 mm, warranty duration: 12 months, air pressure: 7 bar, feed rate Y-axis: 60 m/min, working width: 2,400 mm, The automatic machine for the production of packaging containers from corrugated cardboard, model KDT WG8C1-2400S, is used in manufacturing facilities of all sizes that offer specialized packaging services and use packaging in various sizes and designs. The system has been developed to automate the packaging process in your company, making it as simple and convenient as possible. With this machine, you can produce any type of carton for your products according to your specifications and your customers' requirements. Hjdpfxoynlrgj Ag Ioi

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Hjdpfov Rci Dox Ag Ioi Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 Hedpfoymhxgox Ag Iei * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Condition: new, The KNWP 30 M is a reliable manual workshop press within the Workshop Presses category, ideal for various pressing tasks, including assembly, testing, and straightening workpieces. Made in Europe, this robust machine combines a rigid, machined weldment structure with a versatile hydraulic pump, which can be operated via both hand and foot controls. Its sophisticated two-step hydraulics allow for seamless transitions between quick-stroke and work stroke, while an automatic reset piston ensures efficient operation, adjustable via a throttle valve. The support table, easily adjustable in height, enhances usability and comes with a multi-function die for effective straightening of both flat materials and corrugation. Whether for straightening beams or material testing, the KNWP 30 M provides the power of a 30 t pressure force with a total piston stroke of 160 mm, making it a must-have in any mechanical workshop, garage, or locksmith's shop. For more information or to place your order, please request a quote today. Hjdpfsuyh Sgox Ag Ioi

Year of construction: 1980, condition: excellent (used), functionality: fully functional, machine/vehicle number: 136/027, For Sale: WUPA PS 6.3 Automatic Die-Cutting Press We also offer other WUPA machines upon request. The machine underwent a complete overhaul in 2007 by QTM. During the overhaul, all major components were renewed, including the gripper bars, gripper chains, platen, and all ball bearings. Since then, the machine has been maintained in excellent condition. Comprehensive documentation is available. Both digital and hard copies of the electrical diagrams and exploded views are on hand. A production video can be provided upon request. Technical Specifications: Model: WUPA PS 6.3 Year of manufacture: 1980 Maximum sheet size: 1,450 × 1,020 mm Minimum sheet size: 700 × 590 mm Hodpfx Agjymarre Iei Maximum speed: 4,000 sheets/hour Maximum cutting force: 600 tons Material thickness: – Paper from 80 gsm – Board up to 2,000 gsm – Corrugated board up to E/B flute (according to our own experience) Equipment: – Non-stop feeder – Non-stop delivery Location: Germany Note: All information is provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, please feel free to contact us.

Condition: good (used), Year of construction: 2004, Fasson gluing machine Hsdpfx Aorwi N Hsg Iei - infeed width 2100mm - with press belt - Meler hot melt gluing machine with 4 heads year 2021

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Hsdpfxoyh E Avo Ag Isi Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Safety Standard...

Condition: new, Year of construction: 2025, Gutenberg FLEXOR Flexographic Printing Machine – High-Performance Printing for Packaging & Labels Upgrade your packaging production with the FLEXOR flexographic printing machine, engineered for converters and packaging manufacturers who need reliability, flexibility, and consistent high-quality print. Designed for modern production environments, FLEXOR combines robust construction with customizable configuration to support a wide range of substrates and applications. Built for Modern Packaging Production The FLEXOR is designed as a multi-application flexo press capable of producing professional packaging and labels across multiple industries. Its modular design allows you to configure the machine according to your product range and future expansion plans. Key advantages High-quality flexographic printing with excellent color consistency Wide substrate compatibility Customizable configuration and upgrade options Hedpfx Agjumn Exe Isi Reliable performance for long production runs Ideal for both packaging converters and label producers Wide Range of Packaging Applications The FLEXOR press is suitable for printing on: Paper bags and shopping bags Folding cartons and corrugated packaging Flexible packaging and plastic bags Food packaging and pouches Industrial and household product packaging Produce vibrant, durable prints that elevate brand visibility and shelf appeal. Ideal for Food & Beverage Packaging The FLEXOR is widely used for: Snack food bags and bakery packaging Bread, pasta, rice, flour, sugar, and salt packaging Sauce, ketchup, mustard, and honey sachets Salad dressing pouches and yogurt lids Milk cartons and juice cartons Beverage and water bottle labels Wine and specialty drink labels Designed to support food-safe packaging production with consistent print quality. Perfect for Labels & Consumer Products Expand into high-margin label production: Cosmetic and personal care labels Shampoo and beauty product packaging Pharmaceutical and medical packaging Household and detergent labels Automotive, lubricant, and paint labels The FLEXOR enables converters to serve multiple industries with one press. Additional Specialty Applications This machine is also suitable for: Agricultural and gardening packaging Bubble wrap and gift wrap Greeting cards and specialty prints Medical packaging and blister packs Industrial packaging solutions A truly versatile press designed to grow with your business. Why Choose the FLEXOR? Flexible configuration and upgrade potential Suitable for startups and expanding converters Designed for efficiency, reliability, and scalability Backed by professional installation, training, and after-sales support Boost your packaging capabilities and open new markets with the Gutenberg FLEXOR flexographic printing machine. Contact us today for specifications, configuration options, and pricing.

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery Hedpfx Aex R Tiajg Isi - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: new, empty load weight: 660 kg, maximum load weight: 1,340 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,550 mm, loading space height: 900 mm, loading space volume: 4.5 m³, color: silver, construction height: 1,620 mm, working width: 1,670 mm, E-hydraulics / leaf grid attachment / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / leaf grid attachment / high front grid Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,000 kg - Unladen weight: 660 kg - Payload: 1,340 kg - Interior dimensions: 306 x 155 x 90 cm (L x W x H) - Overall exterior dimensions: 436 x 167 x 162 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70R13 steel rims - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Side walls: anodized aluminium double-walled, 4x foldable & removable - Side wall height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, 60cm swinging grid attachment, high grid at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - Removable front H-frame - E-hydraulics with battery - Sturdy welded steel frame - Completely hot-dip galvanized frame - Many options available hot-dip galvanized - many sturdy cross members for high point loading - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - registration papers: COC papers Special equipment included in the price: - Original corrugated grille attachment all round, 60cm high, swinging, removable Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking bars - bar strip with rubber coating for tension belts & locking bars - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hjdpfx Aou Hr H Ijg Ioi

Condition: new, empty load weight: 915 kg, maximum load weight: 2,085 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: black, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / steel drop sides / emergency hand pump / full steel floor, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / steel drop sides / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 915 kg - Payload: 2,085 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 75 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled steel drop sides, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - STAHL drop sides anodized double-walled - Drop sides foldable at the side and rear - Drop sides removable - Tailgate also swingable - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available - Many options available - Many options available - Many options available. hot-dip galvanized - many stable cross members for high point loading - additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible Hodpeu Hr I Ssfx Ag Iji

Condition: new, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / emergency hand pump / full steel floor, automatic reverse, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 950 kg - Payload: 2,550 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 76 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Drop sides can be removed - Rear flap can also be swivelled - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - electric hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - charger 230V - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and pri Hjdpfx Agju Hr Nij Iei

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 350 mm, loading space volume: 2.7 m³, color: silver, construction height: 1,180 mm, working width: 2,000 mm, steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall exterior dimensions: 514 x 200 x 118 cm (L x W x H) - Loading sill height: 72 cm - Tires: 185/70R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: solid steel drop sides, hot-dip galvanized, removable - Drop side height: 35 cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & can be tipped with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 8. Ramps: at extra charge - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Hot-dip galvanized and reinforced solid steel drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Solid steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - corrugated grille attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hodpfxju Hr Rts Ag Isi

Condition: new, empty load weight: 290 kg, maximum load weight: 1,210 kg, overall weight: 1,500 kg, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 300 mm, loading space volume: 1 m³, color: silver, construction height: 990 mm, working width: 1,540 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Low chassis, Aluminium drop sides, * IMMEDIATELY AVAILABLE * incl. Low chassis, Aluminium drop sides Technical data: - Type: New vehicle - TÜV: New/2 years - Year of construction: 2020 - Availability: IMMEDIATELY! - Gross vehicle weight: 1500kg - Unladen weight: 290 kg - Payload: 1,210 kg - Interior dimensions: 230 x 140 x 30 cm (L x W x H) - Overall exterior dimensions: 354 x 154 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: Yes - Support wheel: Yes, automatic - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Drop sides: Anodized aluminium, double-walled - Drop side height: 30cm - Removable drop sides: Four walls can be folded down - Drop side hinges: 3 on the side / 2 at the front + rear - Removable corner stanchions: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: V-drawbar - Attachment: at an extra charge - Locks: Tension locks - Lashing eyes: 4 pieces in side edge (400kg/dAN) - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Rear & front drop sides foldable - All drop sides removable - Wooden floor - Corner stanchions with insertion option for attachments or grids - Maintenance-free rubber spring axles - Axle with continuous axle beam and independent wheel suspension - 4 lashing brackets inside the side edge - Tension locks - Sturdy V-drawbar - Maintenance-free rubber spring axle from ALKO - Automatic reverse drive - ALKO overrun hitch and parking brake - 13-pin plug - Reversing lights - Large reversing lights - Large rear lights - Rear lights - Rear lights - Large rear lights. plug - reversing lights - large safety lighting - lighting recessed in the rear frame - integrated rear fog light - 13-pin plug - automatic support wheel in the center - automatic rear fog light plug - automatic center support wheel - registration papers: vehicle registration document (ZBII) & COC papers Accessories can be retrofitted - please enquire: - Perforated railing on dropside - High front grille - High tarpaulin - Dropside attachment - Corrugated grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Slot-and-hole rails for tension belts & locking bars - Rod strip with rubber coating for tension belts & locking bars - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hsdpfx Agju Skxgo Ioi

Condition: new, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.9 m³, color: silver, construction height: 2,030 mm, working width: 2,300 mm, Automatic reverse drive, drive-on ramps, hot-dip galvanizing, swivelling rear ramps, 12 lashing eyes, * IMMEDIATELY AVAILABLE * incl. swivelling rear ramps / 12 lashing eyes / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 770 kg - Payload: 2,730 kg - Interior dimensions: 360 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 558 x 230 x 203 cm (LxWxH) - Loading sill height: 45 cm - Tyres: 185R14C steel rims - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 30 cm - Chassis: ALKO rubber spring axle - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 14 - Overrun device & brake: ALKO - Frame/chassis: welded, hot-dip galvanized steel frame - Attachment: at an extra charge Lashing eyes: 22 pieces laterally in the frame (2000kg/daN) - Supports: integrated in ramps - Ramps: 2x aluminum upright on shaft and swiveling - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Novelty with ramps that can be folded away to the side for loading with forklift frame - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Hollow profile construction welded and completely hot-dip galvanized - Body made of sturdy steel side wall profiles - Reinforced, automatic jockey wheel, for safe parking of the loaded trailer, load capacity 500 kg, anti-slip grid covering and integrated support feet - Premium maneuvering handle with tensioning strap retractor - 12 pairs of load securing points with a load capacity of up to 2000 daN per lashing point - Frame completely hot-dip galvanized - 2 lashing points, completely welded in an immersion bath hot-dip galvanized - 2 fold-down and laterally adjustable aluminium ramps with integrated floor support, ramps can be swivelled to the side, with a load capacity of 3500 kg/pair - automatic reversing system - ALKO overrun device and parking brake - sturdy locks for ramps - 13-pin plug - reversing lights - large rear lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel - Approval papers: ZBII and COC papers Special equipment included in the price: - Alu swivel ramps rear Accessories can be retrofitted - please enquire: - bucket storage - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - sheet metal attachment closed 60cm - spare wheel - storage box - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinx Hjdpfou Hrkaox Ag Isi

Condition: new, empty load weight: 480 kg, maximum load weight: 1,020 kg, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.2 m³, color: silver, construction height: 1,020 mm, working width: 1,670 mm, E-hydraulics / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / high front grille Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,500 kg - Unladen weight: 490 kg - Payload: 1,020 kg - Interior dimensions: 250 x 160 x 30 cm (L x W x H) - Overall exterior dimensions: 383 x 167 x 102 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70 R13C steel rim - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - incl. electric hydraulics Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 2 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, removable high grille at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Drop sides removable - Steel plate on wooden floor in Finnish quality - H-frame removable at the front - E-hydraulics with battery - Sturdy welded steel frame - Frame compl. hot-dip galvanized - many sturdy cross beams therefore high point load - maintenance-free rubber spring axles - automatic reverse - overrun device and parking brake - 4 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - charger 230V - load securing net - anti-theft device with discus lock - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slot-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hjdpfju Hr E Djx Ag Isi

Condition: new, empty load weight: 1,140 kg, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: silver, construction height: 1,200 mm, working width: 2,210 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Interior dimensions: 426 x 204 x 35 cm (L x W x H) - Overall exterior dimensions: 575 x 221 x 120 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brake: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge Surcharge - Lashing eyes: 18 pieces per 1500kg - Supports: Surcharge - Ramps: Surcharge Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Ramp shaft with tensioning device under the loading area including folding license plate holder With maintenance support - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - Drop sides removable - Rear drop side mounted on pendulum bearings - Full steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available. Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - Spinlock® load securing system - 18 lashing pins mounted recessed in the steel floor, tensile force per lashing pin up to 1.500 kg - When recessed, the lashing pins can be used as a lashing option under the loading area with the aid of a belt loop - Electro-hydraulic pump - including integrated charger - Pumpless emergency pump incl. socket wrench insert - Automatic reverse - ALKO overrun device and parking brake - Sturdy tension locks - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Very sturdy V-drawbar - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Large reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning strap retractor - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for o Hsdeu Hr Ryjpfx Ag Isi

Condition: new, empty load weight: 305 kg, maximum load weight: 995 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 500 mm, loading space volume: 1.6 m³, color: silver, construction height: 1,170 mm, working width: 1,790 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: new vehicle - Availability: immediately!!! - TÜV: 2 years from first registration - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 1300 kg - Unladen weight: 305 kg - Payload: 995 kg - Interior dimensions: 250 x 125 x 50 cm (L x W x H) - Loading sill height: 50 cm - Tires: 195/70R14 - Brake: yes - Support wheel: yes - 100km/h: INCLUDED !!! - incl. vehicle documents (letter) Standard equipment: - Double-walled anodized aluminium dropsides 30 mm, with integrated aluminium frame - Elaborate longitudinal beams (2 longitudinal beams) - Dropside with load securing system - Accessories such as lashing eyes can be easily mounted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Sturdy screen-printed floor plate, non-slip (birch wood, waterproof glued) - Very sturdy locks for the tailgate made of V2A stainless steel (unique) - Maintenance-free, hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Brake cables with Profi-Longlife as standard (plastic coating of the steel wire strands) - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - all M8 stainless steel (V2A stainless steel) screw fittings - clear operating plate with the most important data (tire pressure, cable assignment, etc.) - 100 km/h approval: Included! - Incl. transfer costs Special equipment included in the price: - Dropside height 50 cm + lid height Sturdy aluminum lid with aluminum corrugated deck plate accessible Sturdy lid railing Indestructible lid lock with discus lock Lid is easily removable 2 x gas spring for easy opening and closing - Cross racks for bicycle carriers, surfboards and similar are available on request. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hjdsu Hr Tuepfx Ag Iji

Condition: new, empty load weight: 195 kg, maximum load weight: 555 kg, overall weight: 750 kg, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 650 mm, loading space volume: 1.6 m³, color: silver, construction height: 1,320 mm, working width: 1,550 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - Availability: Immediately!!! - TÜV: 3 years from first registration - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 750 kg - Unladen weight: 195 kg - Payload: 555 kg - Internal dimensions: 205 x 105 x 65 cm (L x W x H) - External dimensions: 306 x 155 x 132 cm (L x W x H) - Loading sill height: 50 cm - Tyres: 185/70R13 - Brakes: no - Support wheel: at extra charge - 100km/h: INCLUDED !!! - incl. vehicle documents (letter) Standard equipment: - Double-walled anodized aluminium drop sides 30 mm, with integrated aluminium frame - Drop side with load securing system Accessories such as lashing eyes can be easily mounted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Sturdy screen-printed floor plate, non-slip (birch wood, waterproof glued) - Very sturdy locks for the tailgate made of V2A stainless steel (unique) - Maintenance-free, hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing light - Steel mudguards plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - M8 stainless steel (V2A stainless steel) screw connection - clear operating sign with the most important data (tire pressure, cable assignment...) - incl. transfer costs - incl. vehicle registration document Special equipment included in the price: - Side wall height 60 cm + cover height Sturdy aluminum cover with aluminum corrugated cover plate accessible Sturdy cover railing Indestructible cover closure with discus lock Cover is easily removable 2 x gas springs for easy opening and closing - Cross racks for bicycle carriers, surfboards and similar are available on request. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! For more than 30 years we are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialized dealer & repair workshop - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hedpeu Hr Skefx Ag Iei

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3.500 kg - Unladen weight: 800 kg - Payload: 2.700 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hsdpfx Asu Htzaeg Iei

Condition: new, empty load weight: 870 kg, maximum load weight: 2,630 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 870 kg - Payload: 2.630 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - side wall attachment - 60 cm corrugated grid attachment - spare wheel - storage box - battery - 230 V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Hsdju Htz Hopfx Ag Ioi