Used Cosmetics for sale (366)

Condition: like new (used), Year of construction: 2025, operating hours: 280 h, functionality: fully functional, film width: 400 mm, number of blades: 2, product height (min.): 60 mm, product height (max.): 150 mm, product length (min.): 40 mm, product length (max.): 150 mm, filling weight (min.): 2 g, filling weight (max.): 100 g, Pillow-pack filling and sealing machine. Suitable for packaging sauces, creams, mayonnaise, and salad dressings. The machine produces 3- or 4-side sealed sachets (ranging from 2g to 100g) from flat film, with an output of 40–60 units per minute. It is suitable for use in the food, cosmetic, and non-food industries. A 300-liter, 15 kW homogenizer can be connected as an optional accessory. Dwodpfxjz Dgdfo Ap Iec

Condition: used, mileage: 31,500 km, power: 100 kW (135.96 HP), first registration: 11/1987, fuel type: diesel, next inspection (TÜV): 06/2026, color: red, gearing type: mechanical, number of seats: 9, total length: 7,000 mm, Year of construction: 1987, Equipment: ABS, parking heater, Mercedes-Benz 7.5-ton service vehicle – in very good condition – only 31,725 km. For sale is a Mercedes-Benz service vehicle under 7.5 tons, first registered in November 1987, with an exceptionally low mileage of only 31,725 km. The vehicle comes from official use and is in very good technical condition. Only minor cosmetic signs of wear are present. The truck is ideally suited for trades, fire department conversions, event/promotional vehicles, food truck conversions, camper van projects, or export. Vehicle data Make/Model: Mercedes-Benz Type: Truck < 7.5 tons – service vehicle First registration: November 13, 1987 Mileage: 31,725 km Engine: 5,917 cm³ diesel Power: 134 hp Drive: Rear-wheel drive Transmission: Manual 5-speed Condition: Only cosmetic damage, technically very good Availability: Immediately Chassis & Axles * 2 axles, 1 driven * Permissible front axle load: 3,500 kg * Permissible rear axle load: 4,800 kg * Permissible total weight: 7,490 kg * Technical total weight: 7,490 kg Tires – 1st axle: * Tire size: 9.5 R17.5 * Condition driver & passenger side: >70% Dimensions * Overall length: 7,000 mm * Overall width: 2,500 mm * Overall height: 2,900 mm Special features * Extremely low mileage * Robust Mercedes diesel engine from the older series (very durable) * Ideal as a base vehicle for conversions * Immediately ready for use * No known technical defects * German registration documents Conclusion: A rare, excellently preserved Mercedes-Benz 7.5-ton truck with extremely low mileage – perfect for commercial use, conversion projects, or export. Vehicles in this condition and with this history are hardly ever found anymore. Dodpjzbfgdsfx Ap Iswc * WhatsApp message for interested parties: Just let me know – KARL SCHUSTER

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3823954597, Year of construction: 2019, We are offering 3 sets of ready-to-use SolarMark EFLS industrial lasers, manufactured in 2019. Manufacturer: e-SolarMark Type: EFLS Serial number: 3823954597 Date of manufacture: 05-2019 Price per set. The e-SolarMark eFLS fiber laser is a versatile industrial laser designed for marking a wide range of metals and plastics, including HDPE, OPP, ABS, stainless steel, and titanium. It can be used for both static and dynamic marking. Its compact integration dimensions make it suitable for installation on production lines. This laser coder is made with a fully stainless steel industrial design, making it suitable for use in various industries, including electrical, food, bottling lines, automotive, chemical, cosmetic, dairy, healthcare, and construction. Suitable for Datamatrix code marking. High marking speed. If you have any questions or would like more information, please feel free to send us a message or call us. Dwedpjz D T Iqsfx Ap Ijc

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2MOBG00099, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, This lot consists of five JUKI MO-6900 series industrial overlock / safety-stitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI MO-6900 series is JUKI's high-end overlock platform, valued worldwide for high sewing speeds, excellent seam quality and long service life in continuous industrial operation. The lot includes both 1-needle overlock (MO-6904) and 2-needle safety-stitch (MO-6916) configurations. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched set with common operating principles, shared spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, knitwear and other applications requiring fast, durable overedging and safety-stitch seams. Bundle Contents Machine 1 Model: JUKI MO-6916R Internal Reference: 62B-V109 Machine 2 Model: JUKI MO-6916R Class: FF6-50H Internal Reference: 9-NoNr Machine 3 Model: JUKI MO-6904S Class: OF6-300 Internal Reference: 89B-7190 Manufacturing Number: 2M0BG00099 Machine 4 Model: JUKI MO-6916 (MO-6900 Series) Year: 2009 Internal Reference: 123A-H79 Machine 5 Model: JUKI MO-6916-12 Year: 2009 Internal Reference: 132A-K536 Technical Specifications Manufacturer: JUKI Corporation Model Series: MO-6916R (2 machines) / MO-6904S / MO-6916 / MO-6916-12 Machine Type: Industrial Overlock / Safety Stitch Sewing Machine Country of Manufacture: Japan 1-Needle Overlock and 2-Needle Safety Stitch Configurations Maximum Sewing Speed: Up to 7,000 stitches per minute (model-dependent) Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched MO-6900 series production set • High-speed overedging and safety-stitch seaming • Excellent seam quality on denim and heavy fabrics • Reliable performance during continuous production • Common spare parts across the production cell • Proven Japanese engineering and long-term durability Why Purchase This Lot • Five professional JUKI MO-6900 series machines • Matching machines from one factory • Complete safety-stitch capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion • Excellent investment for denim and workwear manufacturers Applications • Jeans production Dwedpfx Aoznz Shop Ijc • Denim manufacturing • Inseam and side-seam safety stitching • Seam serging and overedging • Workwear manufacturing • Uniform production • Knitwear and jersey garments • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: good (used), functionality: fully functional, Year of construction: 1991, operating hours: 10,000 h, load capacity: 3,000 kg, fuel type: gas, motor manufacturer: Fendt, DGUV certified until: 07/2027, overall weight: 3,000 kg, empty load weight: 4,810 kg, color: red, Equipment: CE marking, pallet forks, sideshift, Good day, We are selling our 3-ton forklift because it is no longer needed. The forklift has undergone extensive technical refurbishment. Approximately €4,500 has been invested in the latest work. All work is documented with invoices. The following work has been carried out or components replaced, among other things: Both lifting cylinders replaced Complete mast lines replaced Dwjdpozy Hxwsfx Ap Ioc Complete rear axle steering replaced Diaphragm replaced Plunger replaced Complete service performed All work is documented with invoices New TÜV/UVV inspection For its age, the forklift is in very good condition and has been well maintained technically (see photos). The engine runs very well. The machine has not only been cosmetically refurbished, but significant investments have been made in important technical components. If you are looking for a robust, durable 3-ton Linde forklift for use in a business, workshop, mechanical engineering company, or industrial setting, and you don’t want a modern plastic forklift, you will find a solid machine here. Test drive and inspection are welcome. Please feel free to contact us if you are interested. Best regards

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Dwedpfx Apjzgw Ebs Isc Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Dedpfx Apjznyx He Iewc Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 9128, working width: 600 mm, total width: 800 mm, pressure: 6 bar, overall weight: 320 kg, compressed air connection: 6 bar, input current: 1 A, input frequency: 50 Hz, input voltage: 230 V, total height: 1,500 mm, total length: 1,000 mm, type of input current: AC, power: 0.15 kW (0.20 HP), Equipment: CE marking, VEIT BRISAY BRI-2390/211 Industrial Garment Ironing Press (2011) Professional Pneumatic Steam Ironing Press for Trousers, Denim & Garment Finishing The VEIT BRISAY BRI-2390/211 is a premium German-built industrial ironing press designed for high-quality garment finishing in demanding production environments. Manufactured by BRISAY Maschinen GmbH, part of the renowned VEIT Group, this machine combines pneumatic operation with steam-heated pressing technology to deliver consistent, professional pressing results. This machine was used in the former MASI JEANS factory for finishing denim garments and trousers before shipment. It remained in daily production until the factory closure and represents an excellent opportunity for garment manufacturers, laundries, textile finishing companies, or industrial pressing operations. The ergonomically designed foot-pedal operation allows fast, repeatable production while reducing operator fatigue. The shaped upper and lower bucks make the machine particularly suitable for pressing trouser tops, waist areas and similarly contoured garment sections. Technical Specifications Manufacturer: BRISAY Maschinen GmbH (VEIT Group), Germany Model: BRI-2390/211 Modification: 026 Machine Number: 9128 Year of Manufacture: 2011 Power Supply: 230 V, 50–60 Hz Electrical Power: 0.15 kW Current: 0.7 A Compressed Air: 0.6 MPa Steam Pressure: 0.45–0.60 MPa Condensate Pressure: Max. 0.05 MPa Weight: 320 kg Certification: CE marked Dsdpfx Aszpax Ajp Iowc Key Features • Premium German industrial quality from VEIT Group • Pneumatic foot-pedal operation • Steam-heated upper and lower padded pressing bucks • Designed for continuous production environments • Consistent pressing pressure for repeatable quality • Ergonomic operation for reduced operator fatigue • Heavy-duty industrial construction • Excellent choice for garment manufacturers and textile finishing facilities Typical Applications • Trouser top pressing • Denim garment finishing • Jeans production • Workwear finishing • Uniform production • Jacket and garment pressing • Textile finishing operations • Industrial laundries • Commercial garment processing Condition Previously used in professional garment manufacturing. The machine remained in production until the closure of the MASI JEANS factory and shows normal cosmetic wear consistent with industrial use. Overall condition is good, and inspection is welcome prior to purchase. Video available. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition Dwedpfx Asyt Rk Ejp Iec - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Dwodpfxozxnyys Ap Isc Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,526 h, machine/vehicle number: GS8406-49867, lifting height: 10,100 mm, overall weight: 6,656 kg, GENIE GS-3384RT scissor lift for sale. Fully operational. Minor cosmetic imperfections. Dwsdpfx Apoz Ehfms Isc

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 10647A, automatic overwrapping machine, primarily used in the pharmaceutical and cosmetics industries for the precise wrapping of individual cartons or bundled packages with film Dwjdpfxszz Hxto Ap Isc Format min / max Length (A) approx. 50 mm approx. 250 mm Width (B) approx. 20 mm approx. 180 mm Height (C) approx. 15 mm approx. 100 mm Operating voltage 400 V / 50 Hz (3-phase) Control system: Pester Pac (Lauer)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Dwedpszhnlzjfx Ap Isc Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Dwodsywx Hqjpfx Ap Ijc Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Dsdpfxezhn Rqs Ap Ijwc Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Dodpfszrzk Eex Ap Iowc Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, Equipment: CE marking, For sale: professional industrial stainless steel homogenizer/high shear mixer, 3 kW, mounted on a sturdy, mobile stainless steel stand. All components are made of stainless steel 304. Suitable for intensive mixing, homogenizing, and emulsifying of creams, lotions, gels, shampoos, cosmetics, food products, and other liquid or viscous products such as paint. The machine features electric height adjustment, a frequency inverter, and a separate stainless steel control panel. Specifications/features: Motor power: 3 kW Industrial homogenizer/high shear mixer Stainless steel 304 product contact parts Variable speed via frequency inverter Electric up/down adjustment Mobile stainless steel frame Control panel with start/stop, height control, and emergency stop Three-phase power connection Includes two different stainless steel mixing heads/rotors Robust industrial design Used, in good condition The machine is complete as shown in the picture. Dwsdpfx Apez Idm Sj Iec Asking price: €4,000 Serious offers are welcome.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Dwsdpjzht Riofx Ap Ioc Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED Dsdpfx Aszrhinep Iowc HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Dodpfx Aozrnd Eep Iowc Technical specifications: Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Stainless steel construction Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). For more information or to schedule an appointment, please do not hesitate to contact us!

Condition: used, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,500 mm, Industrial Stone Separation System for Denim & Garment Finishing Lines The Tonello Mini Destoner is a professional industrial stone-removal unit manufactured by Tonello S.r.l., Italy. The machine is designed to efficiently separate pumice stones from garments after the stone-washing process, protecting downstream equipment while reducing manual handling and improving production efficiency. Integrated into professional garment finishing lines, the Mini Destoner allows garments to tumble inside a rotating stainless steel drum while pumice stones pass through the perforated separator and are collected in a dedicated container below. This unit was previously part of the MASI JEANS industrial denim finishing line and is suitable for integration with Tonello and other industrial garment washing systems. Technical Specifications • Manufacturer: Tonello S.r.l. • Model: Mini Destoner • Machine Type: Industrial Garment Stone Removal Unit • Application: Automatic separation of pumice stones after garment stone washing Dwsdpfx Aezmwlhop Iec • Machine Compatibility: Tonello G1 330 HS and other Tonello industrial garment washing machines • Internal Reference: K344 • Country of Manufacture: Italy • Construction: Stainless steel rotating drum mounted on heavy-duty steel frame • Drum Protection: Perforated conical safety separator • Electrical Supply: Typically 400 V, 3-Phase, 50 Hz (to be verified during inspection) Key Features • Designed specifically for post stone-wash garment processing • Efficient separation of garments and pumice stones • Stainless steel rotating drum • Heavy-duty perforated separator cage • Integrated stone discharge chute • Mobile industrial steel frame with locking caster wheels • Operator control panel • Heavy-duty industrial construction • Suitable for continuous production environments Includes • Tonello Mini Destoner unit • Stainless steel rotating drum • Steel support frame • Perforated separator cage • Stone discharge chute • Operator control panel • Collection container • Industrial transport crate Applications • Denim stone washing • Garment finishing • Pumice stone removal • Industrial laundry operations • Textile wet processing • Denim manufacturing • Industrial garment production Condition • Previously used in professional denim production • Good industrial condition • Structurally complete • Includes all major mechanical assemblies • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting, dismantling, loading, transportation, and all related costs. Professional handling is recommended due to the industrial construction of the equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete Tonello industrial washing and finishing line.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Dedpszhn Ngefx Ap Iowc Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Dwjdpfezmgdaex Ap Isc Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Dodpozht Smofx Ap Iowc Please contact us for further information or to discuss delivery and installation options.

Year of construction: 1989, condition: excellent (used), functionality: fully functional, LEUSHUIS STORAGE TANKS | Stainless steel storage/process tank, 10,000 liters Manufacturer: Leushuis Model/Type: LAGER TANKS Dedpfx Apsz Ir R Es Iewc Serial number: 4367 Year of manufacture: 1989 Capacity: 10,000 l Maximum working pressure: 0.9 bar Maximum design temperature: 50°C Weight: 1150 kg Material: Acid-resistant stainless steel (AISI 304 / 1.4301) Professional, large-capacity storage and process tank from the renowned Dutch manufacturer Leushuis, with a capacity of 10,000 liters. The tank is made of stainless steel grade 1.4301 (AISI 304), which guarantees the highest resistance to corrosion, mechanical damage, and the action of cleaning chemicals used in CIP processes. This tank is ideal for use in food processing plants, meat processing facilities, breweries, fat processing plants (production of sauces, mayonnaise), as well as in the chemical or cosmetics industry. The unit is designed for operation at a working pressure of up to 0.9 bar and at a temperature of up to 50°C, which enables stable operation of storage, maturation, or pre-processing of fluids.