Used Crank Shaft Grinder for sale (8,981)

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 1,000 kg, power: 5.5 kW (7.48 HP), fuel type: electric, Low speed grinder, granulator, crusher Power: 5.5kW YUDO JAW-407 manufactured of years: 2006 Inlet opening: 565x455mm Capacity: 60-75 kg / h Fjdpfx Ahjhlkgfe Ujgi Weight: 1t Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle. Fgsdpfx Ahoxp Nm Nj Uji

Condition: ready for operation (used), Year of construction: 1989, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 10791/89, overall weight: 2,500 kg, rotor diameter: 235 mm, number of blades: 27, total length: 2,550 mm, total height: 1,350 mm, control cabinet length: 300 mm, control cabinet width: 800 mm, control cabinet height: 1,200 mm, total width: 1,900 mm, rotor length: 1,050 mm, rotor width: 235 mm, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 120 rpm, hopper volume: 2 l, rotational speed (min.): 120 rpm, rotor flight circle: 235 mm, filling opening width: 1,200 mm, filling opening length: 1,050 mm, ejection height: 500 mm, year of last overhaul: 2025, working width: 1,050 mm, sieve perforation: 25 mm, warranty duration: 6 months, input voltage: 400 V, torque: 10,000 Nm, blade width: 40 mm, Equipment: CE marking, Intake length: 1200 mm intake width & rotor length: 1050 mm ᴓ rotor: 235 mm nº de cutters: 27 un (40x40 mm) rotor speed: 120 rpm Fsdjxrzzqjpfx Ah Usgi Motor: 18,5 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm - other sizes available Machine weight: 2500 kg Machine fully revised; including all wear parts new Scope of supply includes: - Infeed funnel - Steel support - Electric control pannel - Wiring between shredder and electrical cabinet

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; Fedpfx Ahovga Ayo Uegi - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: used, Year of construction: 1954, diameter 400 x 3.100 mm Fgjdpfo A Dkiex Ah Uoi

Condition: used, Year of construction: 2011, Empty weight: 200 kg Part suitable for: trucks Fsdpfxexr Spfo Ah Usgi HL6/1DCLC-13 Occ aandrijfas HL6/1DCLC-13 Mercedes Article nr.: C040004098-veiling Used drive shaft HL6/1DCLC-13 Mercedes

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Fgodper Elwkjfx Ah Uei Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel Fgjdpfx Ahjxlpt Us Uji 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: used, Field of application: Mining Fgodpfxjvly Tps Ah Uji

Condition: like new (used), Year of construction: 2022, operating hours: 114 h, power: 160 kW (217.54 HP), rotational speed (max.): 85 rpm, Details: - Enclosed hopper with suction point - Pusher with profiled cutting chamber floor Fjdpfx Ahjxup Epo Uogi - Safety lines for hydraulics - Machine operation down to -25°C - Wear protection package (checked pattern) - Electrical integration for belt conveyor (3 kW–11 kW) - Bus connection to external control system - Power control with frequency converter incl. air conditioning - Energy measurement module - Control cabinet enclosure rated for temperatures down to -25°C

Condition: excellent (used), Stemas edge sander Fgodpsxp I Aiefx Ah Uei 2 x sanding units with spring-loaded shoes Interchangeable profile pads 1 x sanding unit Adjustment of units in two axes + angle adjustment Oscillation Stepless feed speed adjustment with variator

Condition: used, Year of construction: 2017, Empty weight: 200 kg Part suitable for: trucks Type number: 2188241, AD401SA R780 AD401SA R780 Occ aandrijfas AD401SA R780 Scania OEM : 2188241, AD401SA R780 Article nr.: C040006035-veiling Used drive shaft AD401SA R780 Scania Fgjdpfx Asxr Snnoh Uei

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Fjdpfjwf Nn Iox Ah Ujgi Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Fgjdsxraigepfx Ah Uei Also standard equipped with: - Magnet - Reversible fan - Remote control

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Fgedpsxtp Diefx Ah Uji Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: like new (used), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 8147, power: 160 kW (217.54 HP), rotational speed (max.): 179 rpm, Features: - Enclosed hopper with suction point - Pusher with profiled cutting chamber floor - Safety lines for hydraulics, machine operation down to -25°C - Wear protection package (checkered pattern) - Electrical integration of belt conveyor (3 kW–11 kW) Fodpfx Ajxup A Ijh Uogi - Bus connection to external control system - Power control with frequency converter incl. air conditioning - Energy measurement module - Control cabinet enclosure suitable for temperatures down to -25°C

Condition: excellent (used), Griggio T45S angle milling machine! Diameter of the spindles 35mm Total height of the spindle 160mm Spindle speed variable on belts Spindle rotation: 3000/4500/6000/8000 Fgedpfx Ahjrz Imms Usi 3kw main motor Manual lifting of the spindle Spindle height readout Spindle tilting at an angle of -5°+45° Ce certificate Weight 400kg

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Fgedjxrtt Eopfx Ah Uei Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: good (used), Disc sander, disc grinder, disc sander, edge sander, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm Fgodecmh H Tspfx Ah Uei -Weight: 210 kg

Condition: excellent (used), Used drill sharpener by Hasberg, model FSS. The device is designed for sharpening drills and milling cutters. It features adjustable sharpening angle and a dust extractor. Sold together with the visible accessories. Fgjdjxuk Skepfx Ah Uji

Condition: used, The HFS 4080B C is a robust Conventional Surface Grinder designed for precision in toolmaking, repair shops, and training environments, making it a reliable choice in the Grinding Machines category. With its heavy cast-iron machine frame, this grinder offers a torsion-proof structure that enhances stability during operation. The dual V-guides for transverse motion, combined with box ways for linear motion, ensure high precision during machining processes. The large 400x800 mm table and a travel X-axis of 850 mm accommodate heavy workpieces effortlessly. Features such as the dynamically balanced grinding spindle with preloaded precision bearings guarantee excellent performance and longevity. Additionally, the user-friendly 2-axis position indicator allows for precise grinding wheel placement and boosts productivity through automatic spark-out strokes. This gentle yet efficient operation ensures minimal heat build-up and consistent results, making the HFS 4080B C a reliable choice for any workshop. You can order now to enhance your machining capabilities with this high-performance grinding solution from KNUTH. Fgjdpfjuxpumex Ah Uei

Condition: new, Year of construction: 2025, functionality: fully functional, Fast sanding of multiple components! We are pleased to present our latest solution – a convenient, two-handed sander designed for rapid processing of various elements such as furniture fronts, coffin parts (including assembled ones), and doors. The device also allows for sanding many items (edges) stacked together. The DMS 2HS is a pneumatic sander equipped with a Flex Trim head. This combination ensures the highest quality of sanding results. The machine only requires a compressed air supply for operation. It is fitted with a 1/4″ quick coupling and a transparent dust extraction guard. An additional advantage is the possibility to connect a vacuum cleaner to further reduce dust. Fgjdpfx Asxt Dxhoh Usi The device features adjustable speed control and the ability to change the direction of operation. Key information: * Flex Trim head with a 120mm working width – equipped with a patented Snaplock adapter, enabling rapid head changes without additional tools * Customizable sanding materials to meet customer requirements – e.g., for veneer, MDF, composite, wood, and intermediate lacquer sanding * Dimensions (mm): 455x240x320 * Lightweight construction * Continuously variable speed adjustment * Power supply: compressed air

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Fsdpfx Ahsxmd Sho Uogi Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) Fodpfx Aot Urq Ueh Ujgi - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Single-shaft shredder is equipped with good blade set Fgsdpfxoxlcqtj Ah Uji -Manufacturer: Vecoplan, side mill granulator -Type: VAZ120/105 -Feed capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter knives: 1 piece -Inlet cross-section: 1240 xy 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Number: 1 cutting mill available -Price: per piece -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg