Used Cross Table for sale (39,412)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, TOP work table AT 1000 with beechwood worktop and flour trolley Godpfxexp Uipe Ag Teil

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 01-11-127, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,050 mm, table length: 3,000 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, Equipment: saw blade guard, scorer, Types: F 45 CE version. Machine no.: 01-11-127. Maximum saw blade: 450 mm. Power supply: 3/400V/50Hz / 13.5 Amp. 45° (90-45°). Scoring motor: 0.75 kW. Main motor: 5.5 kW / 7.5 HP. Table length: 3000 mm, width: 400 mm. Width fence: 1050 mm. Speeds: 3000, 4000, 5000, 6000 rpm. Giedpsx Tt Ubefx Ag Tol

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Godpfjw Sy T Hox Ag Toil Storage location: Nattheim

Condition: used, Year of construction: 2004, total length: 3,350 mm, total width: 2,440 mm, total height: 1,790 mm, Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: MC00073318 - Main motor power [kW]: 5.5 - Parallel stop displacement [mm]: 1600 - Roller table length [mm]: 3200 - Table width [mm]: 2350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 100 - Controlled axes: Rip fence - Electrically adjustable axes: Rip fence - Options: Scoring unit - └ Arbor pre-cutter saw blade diameter [mm]: 23 - Spindle speed: - └ Min. spindle speed [rpm]: 1330 - └ Max. spindle speed [rpm]: 2870 - Voltage [V]: 400 - Current consumption [A]: 18.46 Gijdsx Nh Egepfx Ag Tol - Fuse [A]: 32 - Power [kW]: 7.7 - Transport dimensions: 3350mm x 2440mm x 1790mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2018, • Adjustable jigg for all standard pallets with 9 blocks or 3-4 stringers. (standard equipment*). Giedscvm Agspfx Ag Tol • Suitable for: a. two and four entry pallets b. open and perimeter based under deck. • Blocks are clamped pneumatically. • Finished pallets are ejected pneumatically. • Adjustable and removable latch plates. 6 pieces 200 x 120 mm and 6 pc. 250 x 120 mm. • Optional with two spring balancers on a rail. • The frame also serves as a buffer tank for compressed air. • Also available in XL version for pallet production up to a length of 3.400 mm.

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, travel distance W-axis: 800 mm, CNC Boring Mill TOS VARNSDORF Technical Specifications Brand: TOS VARNSDORF Model: WHN 130 CNC: Heidenhain ITNC 530 Year: 1999 / Fully Retrofitted 2014 X: 3500 mm Y: 2000 mm Gedpfx Agox Tfngj Tsil Z: 1250 mm W: 800 mm PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HAAS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, Machining, PINACHO, MORI SEIKI, Milling Machine, Lathe, Grinding Machine, Boring Mill, Press, Laser, Shear, Press Brake)

Condition: used, Year of construction: 2020, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Gsdpox N Nlhsfx Ag Tjil Bid now – sale to the highest bidder. Lot 2910021: GRUSE electro-hydraulic low-profile lift table, floor mounted, 3000 kg capacity ELS 3-16-W2, 2020 The lot consists of 1 used electro-hydraulic low-profile lift table in very good condition. Clean condition with minimal signs of use. Features: low-profile loading platform, category 3, load capacity: 3000 kg, tare weight: 1200 kg. Electricals: 400 V, 3.0 kW, IP54. Wired remote control, steel chain brackets included.

Condition: new, functionality: fully functional, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, total height: 1,050 mm, column diameter: 72 mm, drilling capacity: 16 mm, type of input current: DC, overall weight: 47 kg, total length: 300 mm, total width: 500 mm, spindle mount: MK 2, input voltage: 230 V, drill chuck size: 16 mm, stroke length: 85 mm, input frequency: 50 Hz, table length: 290 mm, table width: 290 mm, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Gijdpfxjk Iuzis Ag Tjl Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: used, Year of construction: 1999, ❗Honing Machine / Cross-Honing Machine Sunnen Eclipse EC-3500-CGM-27 ❗ Year of manufacture: 1999 Machine No.: 3X1-1926 Condition: Used, untested Delivery terms: Free loaded on truck – unpacked Location: 82216 Maisach Availability: Immediate – upon agreement Giedpfxsxv Dmqe Ag Tel Payment terms: Advance payment – by bank transfer Internal no.: PHY1 Technical specifications: Manual stroke diameter range: 1.5 – 165 mm Automatic stroke diameter range: 1.5 – 102 mm Stroke length range: 6.0 – 170 mm Spindle speeds: 200 – 3000 rpm Stroke rates: 60 – 500 strokes/min Spindle motor power: 4.1 kW Stroke motor power: 1.1 kW Compressed air requirement: 5.5 bar 400 V / 50 Hz Spindle bearings renewed in 2015 Frequency converter replaced in 2024 Spindle motor fan replaced in 2025 Further technical data – see PDF attachment Notes: Stop fingers missing (see photo) Operating hour counter defective Tool type selector switch defective Light curtain defective (bypassed in the control cabinet) Despite the above-mentioned defects, the machine was in regular operation at a specialist company. Scope of delivery: Available documentation No additional accessories Dimensions & weight: Installation dimensions (L x W x H) approx.: 1600 x 1200 x 1900 mm Weight approx.: 900 kg If you have any questions or wish to arrange a viewing, please do not hesitate to contact us. ⚠️Also take a look at our other listings.⚠️ Additional notes: We expressly recommend collection by direct shipment (haulage company). The item is sold without any warranty of any kind. Technical specifications provided without obligation. Subject to prior sale. ❗Sale exclusively to business customers❗

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V 473730, cutting length (max.): 2,900 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, total length: 3,200 mm, total width: 1,800 mm, height adjustment type: electric, overall weight: 1,150 kg, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, pivoting range: 46 °, power: 5.5 kW (7.48 HP), sliding table length: 3,000 mm, sliding table width: 400 mm, sliding table height: 900 mm, Equipment: motor brake, rotational speed infinitely variable, scorer, Machine accessories: - Double miter fence Lachner DGA-900 - Parallel fence 2000 mm - Complete documentation + data backup Gsdpfx Ajx Tt Tweg Tjil - Additional front table – foldable - Wedge fence for solid wood - Wide extraction hood - Minor damage, see photo

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Gsdpehvmkijfx Ag Tsil Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Gjdpsxzi S Nofx Ag Teil Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: excellent (used), For sale rotary table for boring machine Table 2000mmx2000mm Table weight 20000kg Godpfx Ageui Nt Nj Toil Max table load 40000kg Travel 2000mm Control Table condition perfect

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable Included in delivery: Gedpfx Asv Tliljg Toil 1x Workbench frame, new Material color: gray Workbench frame legs: height adjustable 1x Worktop, new Material: Multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Note: - The pictures serve to illustrate the material. - The metal crates, boxes etc. are not included in the scope of delivery. - The color of the material may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3-5 working days. Gsdpfx Ast A U Ncog Tjil Basic dimensions: Width: approx. 1,550 mm Height: approx. 2,000 mm Depth: 600 mm The scope of delivery includes: 02x shelf uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Upright height: 2,000 mm Upright depth: 600 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 05x Shelf beams, used Material color: orange Truss type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 10x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 08x Locking bracket, new Version: galvanized f. Crossbeam width: 50 mm 03x Round ear, used Total length: 1,350 mm Tube Ø: approx. 30 mm 02x L-bracket, second-hand Material color: orange L-profile: approx. 60 x 60 mm Material thickness: 4.00 mm Total length: selectable Drill hole Ø: approx. 13 mm Hole spacing: approx. 50 mm 08x screws, M12 16x nuts, M12 04x screws, M10 04x nuts, M10 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 600 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized Gedpfx Agei Ewqks Toil 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 600 mm surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 600 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Giedpfx Agjlgzqcj Tel Type: Pal Rack NS In the trusses are from the top, bottom & front view each 2 holes with a Ø of approx. 16 mm! These are used for diagonal bracing! Included in delivery are: 01x pallet rack traverse, used Material color: orange U-profile : 150 x 50 x 3,00 mm execution: head traverse agraffe: 4 HK (hooks) clear width: approx. 1.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.400 mm total height: approx. 900 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.400 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Gsdpfxeh Euqle Ag Toil Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: META (Thyssen) Included in delivery are: 01x pallet rack traverse, used Material color: orange type of truss: HN 100|20 box profile: 100 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm Godjiimtqepfx Ag Toil max. load per truss pair 2.100 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: Jung Heinrich Type: T Included in delivery are: 01x pallet rack traverse, used Material color: orange Type of truss: HN 120|20 box profile: 120 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Gijdpoixqirofx Ag Tel requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Technical data for the pallet rack traverse: Shelf system: Kimer The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL2004 pure orange Type of cross beam: 2C155 agraffe: 5 HK (hooks) clear width: 3.600 mm max. load per truss pair 3.700 kg, with evenly distributed load Your contact persons in our company: Gjdpfx Ajnmyq Nsg Teil Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Technical data for the pallet rack traverse: Shelf system: Kimer The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL2004 pure orange Type of cross beam: TB120x50 agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.400 kg, with evenly distributed load Giodpfx Agsnmytcj Tsl Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data of the pallet rack traverse: Manufacturer: SLP Type: head traverse Included in delivery are: 01x pallet rack traverse, used Material color: blue Type of truss: RTS 90 box profile: 90 x 50 mm agraffe: 3 HK (hooks) Giodpfxsnq A S Do Ag Tjl clear width: 2.600 mm max. load per truss pair 2.000 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Giedetk Ikmspfx Ag Tel General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Included in the scope of delivery: 01x Workbench, used Subframe dimensions: approx. 1,340 x 700 mm Height to top edge of worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Comprising the following for EACH unit: 02 x Workbench stands, used Manufacturer: Dexion Type: P 90 Material color: sendzimir galvanized Profile dimension: 100 mm Including cross and diagonal braces, base plates The stands are pre-assembled (bolted truss construction) 900 mm high 700 mm deep 04 x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08 x Dexion safety pins, used Type: Speedlock P90 Material color: sendzimir galvanized Gsdpfx Aex Itdleg Teil Head Ø: 13.58 mm Pin Ø: 5.92 mm Weight per piece: 0.018 kg Chipboard panels, 2nd grade, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Surface: possibly coated (single piece) 08 x Wing screws with countersunk head, new Dimensions: 6.3 x 70 mm Note: - Workbenches are picked unassembled; - Workbench stands are pre-assembled; - The production lead time is usually approx. 3 - 5 working days. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or further transport is required, additional costs will apply, which can be individually requested from us depending on the delivery location and scope.