Used Crowning Creation for sale (1,040)

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2508-CNC Delem DA-58T Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Approaching speed: 0 kW - Length: 2600 mm Giedpfjiumyzox Ag Tsl - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA DA-58T control - One-click program generation - Advanced operator support based on algorithms - Advanced graphic simulation of bending sequences - Included prompts for the operator - Algorithms to shorten the production process - Automatic crowning calculation - High-resolution TFT touchscreen - USB interface Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting ensures a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, mileage: 647,000 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Mercedes Benz 1845 HAD / STREAM SPACE / German vehicle, 1 owner, VIN: ...0252072 Gjdpfx Agsx Ru H Hs Teil Front axle load: 8.0 t, Trailer coupling: Ringfeder towing hitch, Work lights on rear cab wall (top), Audio system: CD radio (Bluetooth), Battery 220 Ah, CB radio, Compressed air horns (2) on cab roof, Driver assistance system: Attention Assist (drowsiness detection sensor), Driver assistance system: Brake Assist (Active Brake Assist), Driver assistance system: Lane Keeping Assist, Cab width: 2.50 m, Cab with air suspension, Suspension: front springs 8.0 t, 3-leaf, Alternator 150 A, Luggage shelf on rear cab wall (top), 12-speed transmission – Type: G 330-12, Rear axle crown wheel 300, Info display 12.7 cm with additional display, Folding table in waist area, Automatic climate control, Fuel tank: 390 l aluminum, left, Cool box / refrigerator, Air intake behind cab, Mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, Reinforced engine brake, PTO MB 131-2c, Premium Comfort lower mattress, Retarder, Fleet management system interface, Drawers under waist shelf, Skid plate under main tank, Circuit breaker, Seats in cab: passenger seat with armrest, Seats in cab: driver’s air-suspension comfort seat, External sun visor, Sunblind for driver’s door side window, Front mudguards, Storage box left under cab, 12V socket in passenger footwell, Extra 12V power socket, 24V / 25A socket in passenger footwell, Stone chip protection grille, Carpet on engine tunnel, Cab door extension, Front underrun protection, Preparation / switch for lift axle on semi-trailer / trailer, Additional thermal insulation, Additional heater (water), Transmission oil cooler Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Trailer socket 24V / 15-pin, Work lights, Arocs, Exhaust tailpipe to vehicle center, Exterior mirrors electrically adjustable and heated, Rear axle differential lock, Compressed air connection in cab, Steel air tank, Medium compressed air unit, Driver’s cab: movable cab entrance, Driver’s cab: hydraulic tilt, Driver’s cab: L StreamSpace, Suspension: leaf/air, Suspension: front springs 7.5 t, 3-leaf, Electric window lifters, 12-speed transmission – Type: G 281-12, Urea tank (AdBlue): 60 l, Hydraulic Auxiliary Drive (HAD), Body/build: tractor unit, Body variant: standard, Lower comfort bunk, Central locking system, 3-piece mudguard, Non-regulated power steering pump, Air intake at front, 2-stage air compressor, Heated air dryer, Engine 12.8 l – 330 kW inline 6-cylinder diesel (OM 471), Engine compartment encapsulation, Ramp mirror, Residual heat usage, Disc brakes with partial protection, Disc brakes front and rear axles, Seat covering/upholstery: fabric, Seats in cab: functional passenger seat, Stabilizer front axle, 24V socket in cab, Tachograph / EC control device, Toll collection preparation, Straight front axle, Perm. gross weight 18,000 kg

Condition: excellent (used), Kortho GraphicJet 18P InkJet printing system High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding boxes, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance * High-resolution inkjet printing: 128 individually addressable dots per print head. * Completely free print image design within the text area. * Combination of text, logos and barcodes in one print image. * Kortho Image Generating Software for logical print image creation on the pc. * Unique infrared remote control: no cable connection required. * Separate, refillable ink tank with industry-standard volume. * Clean, easy ink refill during operation. * Very low cost per print. Print costs can be calculated by program. * Maintenance reduced to a minimum. * No flushing with solvent required. The advantages of the Kortho GraphicJet 18P The compact print head and the separate ink tank, in conjunction with a variable standard mounting bracket, enable operation at almost any position in the production process. Regardless of whether a carton is to be labeled from above or a tray or paper bag from the side. A print image with a format of up to 18 x 500 mm can be designed completely freely for each print head. A print image can contain texts of up to eight lines, logos, time, date, barcodes, batch numbers and shift codes in different display variants. The font height that can be displayed is 1.5 mm to 18 mm per line. Texts and graphic elements can appear both horizontally and vertically in a printed image. Automatic numbering Lot numbers, batch numbering, pallet numbering and other variables in different versions. Several number codes are possible in one print image. Automatic date coding Best-before date, production date and other variables in different versions, such as day of the year, day of the week, week of the year, in Arabic format. Several number codes are possible in one print image. A date can also be entered by the operator directly on the control unit. Automatic time coding The time is taken from the control unit's clock chip. Different versions of the display are possible. Several time codes can appear in one print image. Automatic shift codes Up to 25 shift codes can be defined over a maximum of 7 days. Several shift codes are possible in one print image. Graphic images Giodpfx Ageq Tp Srj Tol Logos can be imported as black and white bitmaps via the KIGS software. Several images are possible within one print image (depending on the format size). Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel Giedpfx Agjx R Umtj Tol - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit Giedpfx Aev Rbkmog Tol -extension feeder 100 cm

Condition: excellent (used), functionality: fully functional, mileage: 38,503 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,535 kg, maximum load weight: 965 kg, first registration: 11/2020, next inspection (TÜV): 09/2026, emission class: euro6, color: silver, number of seats: 3, number of previous owners: 1, machine/vehicle number: SLS8400, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, tail-lift, truck registration, 229L Stuttgart 9775 Paint colour Iridium Silver MB 9775 A50 Front axle with increased load capacity AI1 Control code rear axle, crown gear 215 AR2 Axle ratio I = 3.923 BH6 Control code hydro aggregate variant 5 BK1 Control code wheel brake configuration 1 C6L Multifunction steering wheel C907 SERIES 907 TRANSPORTER VS30 CB8 Stabilisation Level II CL1 Steering wheel adjustable in tilt and height CW2 Omission of vehicle lowering D03 High roof D50 Continuous partition E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E1U USB socket 5 V E2I Auxiliary battery for retrofit consumers, interior E2N Control Pro-Features in NTG6 E36 Separation relay for additional battery Gedpfxox Nbbue Ag Teil E3J Pre-installation switch panel E3M MBUX multimedia system with 7-inch touchscreen F3F Passenger-optimized shift console F68 Heated and electrically adjustable exterior mirrors F907 SERIES 907 TRANSPORTER VS30 FKA Panel van FR8 Reversing camera GD8 6-speed manual transmission ECO Gear H20 All-round heat-insulating glass HH9 Semi-automatic climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Series C907/C910 Sprinter IE0 Series C907 VS30 RWD IG4 Standard IL5 Left-hand drive IL6 Metallic paint IR4 Wheelbase 3665 mm (BM-forming code) IT4 3.5 tonner J10 Tachometer km/h J58 Belt warning system for driver's seat J65 Outside temperature display JA8 Crosswind Assist JG0 Gearshift indicator JH3 Communication module (LTE) for digital services JI7 Initial running distance maintenance interval 60,000 km K13 Main tank 71 litres KP6 Emission control SCR Generation 3 LA2 Headlamp assistant LB5 Third brake light LC2 LED light strip in load compartment M40 Alternator 14V/200A MI2 Engine OM651 DE 22 LA 105 kW (143 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MQ0 OBD (On-board diagnostics) Level D OH2 HU Freshup 2 PH1 Master code tail lift Bär Cargolift Q11 Longitudinal member reinforcement RH2 Tyres 235/65 R16 C RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Dual passenger seat SA5 Driver airbag SB1 Comfort driver's seat SK2 Seat occupancy detection driver's seat T16 Sliding door right T77 Grab handle, load compartment sliding door at partition T86 Grab handle on rear right corner pillar V42 Lashing rails side wall at belt rail V43 Wooden floor V85 Smoker package V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment to roof height (wood) VF7 Fabric Maturin black W54 Rear doors, twin-leaf, 270 degrees XG7 Without uprating/downrating 3500 kg XM1 Noise reduction XM4 Acoustic package XV1 Reference weight at least 2381 kg required YK4 Tie-down straps for lashing rails Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production Düsseldorf Z7K Fleet Comfort Package Z7L Fleet Load Compartment Package ZM0 Panel van

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs Gisdpfx Asipxzpog Tjl - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, 6 axes Y1 - Y2 - X - R - Z1 - Z2 Electromechanical follower pair Gjdpfx Agsx Sru Ds Toil Pneumatic punch and die clamping Pneumatic bending and pressing unit Intermediate pieces H = 200 Angle reader ACTIVE hydraulic crowning

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming Godjx Iwfmopfx Ag Teil ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, mileage: 53,731 km, power: 315 kW (428.28 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, For enquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone at .----Mercedes-Benz 2543 L 6x2/4 skip loader---- * Body: HIAB TS 2018 TAZ * Radio remote control---- * A1C Front axle, 7.5 t * A1Y Front axle, straight version * A2E Rear axle, crown wheel 440, hypoid, 13.0 t * A4B Leading axle, 7.5 t, steered, liftable * A5I Axle ratio i = 3.077 * B1B Electronic braking system with ABS and ASR * B2A Disc brakes, front and rear axle * B2D Partial-protection disc brakes * B2X Electronic parking brake * B2Z Additional parking brake, front axle * B5L Trailer brake connection, rear, duo-matic + standard * C0J Frame overhang 1200 mm * D0S Compressed air connection, in cab * D1C Air-sprung driver's seat, comfort * D1N Functional co-driver’s seat * D3Q Seat upholstery, velour * D6F Air conditioning * D6I Residual heat utilisation * D7G Storage compartment covers, driver and co-driver side * D7Q High storage compartment, on engine tunnel Gjdpfx Agexzv Rxj Teil * D7R Storage flaps above windscreen * D8A Roof hatch/ventilation flap * E4W Start-off assist, speed limit 30 km/h * E5H Night driving light switch * E7F Wired remote for air suspension * F1O M cab ClassicSpace, 2.30 m, 320 mm tunnel * F5L External sun visor, transparent * F6I Heated front mirror * F6Q Air horn * F8B 2 remote control keys * F8E Locking system with central locking * F8F Comfort locking system * F8H 2 additional remote control keys * F8V Light sensor * F8W Rain sensor * G0K Driving program economy/power * G0R Transverse gearbox supports, optimized for removal * G0T Predictive Powertrain Control * G2B Gearbox G 211-12/14.93-1.0 * G5A Single-plate clutch * G5G Mercedes PowerShift 3 * I2E Tubeless tyres, 315/70 R 22.5, FA/LFA/NLA * I2F Tubeless tyres, 315/70 R 22.5, RA * I4G Wheel configuration 6x2/4 LFA 22.5" * I5E 25-tonner * I6X Air suspension, rear axle * J2G Digital radio * J2K Speaker, 2-way system * J2U Navigation system * J3U Prerequisite FleetBoard Manager App * J6C Multimedia Cockpit, interactive * J6Y Remote Online * J6Z Preparation Mercedes-Benz Truck App Portal * J9A Preparation for CB radio, 12 V, DIN slot * J9D Preparation for toll collection * J9P Preparation and display for up to 4 cameras * JALD Axle lift system for leading axle * JBWD 3 air reservoirs mounted on the frame or overhang * JC1B Wheelbase 2550 mm * JCFM Battery carrier relocated, dimension 725 mm * JCVX Wheelbase reduction * JK3U AdBlue tank 30 l, right * K0T Main tank, left * K1I Tank 290 l, left, 650 x 700 x 750 mm, aluminum * K3V AdBlue tank 60 l, left * K5M Lockable tanks * K5S Protective cap for AdBlue dosing system * K7D Exhaust system, tailpipe to the right outside * L0A Lighting regulation per UN-R 48.06 * L1I Fog lights, LED daytime running lights * L2H Side marker lights, flashing * M0C Undershield, for dust protection * M0Q Noise regulation per UN-R 51.03 stage 2 * M2R Engine OM470, inline 6, 10.7 l, 315 kW (428 hp), 2100 Nm * M4X Engine version Euro VI, E * M5A 2nd generation OM470 engine * M5V High-performance engine brake * M6L Air compressor, 2 cylinders * M7I Insect protection grille, in front of cooling unit * M7T Controlled water pump * M8A Air intake, from the front * N1Q NA MB 124-10c, MPA, N/M rpm * N6Z Gearbox oil cooling * O1T Interior colour greige/anthracite * Q1M Front spring 7.5 t, 3-leaf * Q3Y Frame lowering, without residual bellows pressure control

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 5,600 mm, total length: 8,600 mm, total height: 12,200 mm, overall weight: 62 kg, rotational speed (min.): 1,420 rpm, roller diameter: 127 mm, rotational speed (max.): 1,420 rpm, feed rate X-axis: 300 m/min, input voltage: 230 V, grinding belt width: 76 mm, power: 1.1 kW (1.50 HP), LAGUNA 1632 SuperMax cylindrical grinding machine - Lever for quick unit height adjustment + micro device. - Digital display of workpiece thickness. - Special design of the cylinder cover for 15 % better extraction. - Lever for lifting the table when sanding wide workpieces. - Rigid cylinder adjustment. Godpfx Agoqv D Uuj Toil - Intelligent feed deceleration for larger material removal. - Supplied with base and crown 80 sanding belt. Developed by professionals for demanding workshops, smooth operation, narrow or wide workpieces, precise sanding and quick adjustments. - Type: 1632 SuperMax - Recommended use: Professional production - Power (230 V): 1.1 kW - Feed belt motor: 40 W - Speed: 1420 rpm - Cylinder diameter: 127 mm - Feed speed: 0-3 m/min. - Workpiece thickness min/max: 0.8 - 76 mm - Max. workpiece width: 406 (812) mm - Sanding belt width: 76 mm - Extraction: 100 mm - Minimum air flow: 1000 m3/hour - Length × width × height: 860 × 560 × 1220 mm - Weight: 62 kg - Packaging dimensions: 940 × 660 × 550 mm - Weight incl. packaging 71.7 kg Scope of delivery: - Base frame - Sanding belt, crowning 80

Condition: ready for operation (used), Year of construction: 2019, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm Number of working hours ca. 40.0 h control DA 58 T oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8186 kg range L-W-H 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours (!!) current new price approx. 80.000 Euro special price on request ----- POWER BEND PRO electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color screen TFT with high resolution * Bending sequence calculation * Product programming and display in real size * USB interface - CNC controlled axis : Y1 - Y2 - X - R - CNC electro-motorized back gauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 2x manually adjustable stop fingers - ROLLERI roe deer foot top tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control Gjdpex Haxtefx Ag Tsil - CE mark / declaration of conformity - Operating instructions

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training Giedpfxeh Ranps Ag Tsl It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Gsdpfx Agswn Ebij Teil Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Condition: used, mileage: 227,782 km, power: 130 kW (176.75 HP), first registration: 09/2005, fuel type: diesel, empty load weight: 4,840 kg, maximum load weight: 2,650 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,820 mm, next inspection (TÜV): 08/2026, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: other, number of seats: 2, loading space length: 5,500 mm, loading space width: 2,500 mm, maximum speed: 90 km/h, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, immobilizer system, onboard computer, trailer coupling, * Well-maintained German vehicle * Vehicle ID number: WDB9702271L060587 * Valid roadworthiness test (HU) until Technical Data: * Overall length: 8,400 mm * Overall width: 2,500 mm * Overall height: 2,950 mm * Wheelbase: 4,820 mm * Permissible total weight: 7,490 kg * Curb weight: 4,840 kg * Payload: 2,650 kg Loading area: Giodpfx Agsxviwhs Tel * Length: 5,500 mm * Width: 2,500 mm * Loading height: 1,050 mm Special Equipment: * Trailer brake (2-line system) * Trailer coupling: Towing coupling * Trailer coupling: Central axle trailer G 250 * Trailer socket 12V / 13-pin * Trailer socket 24V / 15-pin * Audio system: Radio Truckline CD 65 / 70 incl. CD drive * Reinforced battery * Long-distance cab * Cab: reinforced shock absorber * Electric window lifts * Cruise control * Spare wheel holder, side-mounted * Rear lights for tail lift installation * Air conditioning * Engine brake with constant throttle * Tail lift switch * Side windows rear left/right * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 6.75x17.5 * 24V cab socket * Cross member for trailer coupling * Auxiliary heater (air) Standard Equipment: * Emission standard Euro 3 * Axle configuration: 4x2 * Electrically adjustable and heated exterior mirrors * Roof hatch (steel) * Cab: L (long) * 80 A alternator * 6-speed gearbox - type: G 56-6 * Rear axle H 2, crown wheel 325 * Interior filter: pollen filter * Body/chassis: chassis * Fuel tank: 125 liters * Model update: Atego 2 * Engine: 4.3 liter – 130 kW diesel (OM 904 LA) * Wheelbase: 4,820 mm * Disc brakes * Side underrun protection * Cab seats: passenger seat, fixed * Cab seats: driver's seat, standard suspension seat * Telligent brake system with ABS * Fixed rear underrun guard * Immobilizer * Permitted total weight: 7.49 t Nationwide delivery within Germany possible!!! Trade-in possible!!! Leasing and financing also possible without down payment. Errors, misprints, and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2010, pressure 220 t chamfer lenght 3720 mm distance between columns 3020 mm column arm 400 mm ajustment speed 125 mm/sec working feed 10.0 mm/sec return speed 132 mm/sec back stop - adjustable 800 mm stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. total power requirement 18.5 kW weight of the machine ca. 12800 kg. range L-W-H 5850 x 2220 x 2820 mm - in checked conditions - machinevideo - ?v=d-ZVBtFsjI4 Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality color LCD screen (TFT) - Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + crowning - CNC electric motor-driven backgauge (X axis) - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor-driven bending table crowning - 2x manually adjustable stop fingers - AMADA/PROMECAM upper tool holder Gsdpfx Aexfwc Djg Teil - 1x reversible MULTI-V die block - 2x front sliding support arms (“sliding” system) - Side guard * Swivel doors + FIESSLER laser safety device - Rear safety device (light barrier) - 1x freely movable foot control - Original operating instructions * Special accessories included in delivery: - 1x NEW complete upper tool set - split (currently not installed) * ROLLERI PS.135.85.R08 * Height 135 mm / 85 degrees / R 0.8 mm

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual Giodjtizavjpfx Ag Tol - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Distance between uprights: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation Gisdpfx Agoxnxwns Tol - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning - Tool cabinet

Condition: used, mileage: 227,782 km, power: 130 kW (176.75 HP), first registration: 09/2005, fuel type: diesel, empty load weight: 4,840 kg, maximum load weight: 2,650 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,820 mm, next inspection (TÜV): 08/2026, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: other, number of seats: 2, loading space length: 5,500 mm, loading space width: 2,500 mm, maximum speed: 90 km/h, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, immobilizer system, onboard computer, trailer coupling, * Well-maintained German vehicle * Vehicle ID number: WDB9702271L060587 * Valid roadworthiness test (HU) until Technical Data: * Overall length: 8,400 mm * Overall width: 2,500 mm * Overall height: 2,950 mm * Wheelbase: 4,820 mm * Permissible total weight: 7,490 kg * Curb weight: 4,840 kg Giedjxviqbepfx Ag Tjl * Payload: 2,650 kg Loading area: * Length: 5,500 mm * Width: 2,500 mm * Loading height: 1,050 mm Special Equipment: * Trailer brake (2-line system) * Trailer coupling: Towing coupling * Trailer coupling: Central axle trailer G 250 * Trailer socket 12V / 13-pin * Trailer socket 24V / 15-pin * Audio system: Radio Truckline CD 65 / 70 incl. CD drive * Reinforced battery * Long-distance cab * Cab: reinforced shock absorber * Electric window lifts * Cruise control * Spare wheel holder, side-mounted * Rear lights for tail lift installation * Air conditioning * Engine brake with constant throttle * Tail lift switch * Side windows rear left/right * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 6.75x17.5 * 24V cab socket * Cross member for trailer coupling * Auxiliary heater (air) Standard Equipment: * Emission standard Euro 3 * Axle configuration: 4x2 * Electrically adjustable and heated exterior mirrors * Roof hatch (steel) * Cab: L (long) * 80 A alternator * 6-speed gearbox - type: G 56-6 * Rear axle H 2, crown wheel 325 * Interior filter: pollen filter * Body/chassis: chassis * Fuel tank: 125 liters * Model update: Atego 2 * Engine: 4.3 liter – 130 kW diesel (OM 904 LA) * Wheelbase: 4,820 mm * Disc brakes * Side underrun protection * Cab seats: passenger seat, fixed * Cab seats: driver's seat, standard suspension seat * Telligent brake system with ABS * Fixed rear underrun guard * Immobilizer * Permitted total weight: 7.49 t Nationwide delivery within Germany possible!!! Trade-in possible!!! Leasing and financing also possible without down payment. Errors, misprints, and prior sale excepted.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller Godpfeium Hkjx Ag Tsil - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC OT-41 Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist Gisdpfx Asium Dhjg Tel - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC Delem DA-58T Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor Gjdegi Dkyjpfx Ag Tjil - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC OT-41 Specifications - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. Gijdpjh Rdvajfx Ag Tsl See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Godpjgih Iusfx Ag Tjil Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm Gsdpegi Dk Dsfx Ag Teil - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site