Used Crowning Creation for sale (1,075)

Condition: good (used), Year of construction: 2016, operating hours: 4,824 h, load capacity: 1,600 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,340 mm, mileage: 4,824 km, Electric triplex stacker Brand: CROWN Year of manufacture: 2016 Capacity: 1,600 kg Lift height: 5,400 mm Overall height: 2,340 mm 4,824 operating hours Equipped with FREELIFT Initial lift, ideal for uneven floors Fork length: 1,200 mm Battery from 2024 Automatic filling system External charger. Cgjdpfxoyh Hw Us Aftep

Year of construction: 1994, condition: used, Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm Cedpfx Afsrdil Aetogp -Weight 374 kg

Condition: new, Charger 80V – 100A for Forklift Batteries Professional Industrial Charger for 80 V Traction Batteries. This high-quality charger with 80 V and 100A is ideal for the safe, efficient, and gentle charging of forklift and traction batteries. Thanks to state-of-the-art technology, it is significantly more energy-efficient than comparable models and is perfectly suited for demanding daily use in industrial, logistics, and workshop environments. Its compact design and robust protection features make this charger a reliable solution for demanding applications. Supplied with a mains plug, battery connector available optionally. Your Advantages at a Glance • Efficient technology – saves energy and reduces power consumption compared to traditional chargers. • Soft-start function – minimizes inrush current and ensures a stable charging start. • Thermal protection – safeguards against overheating during extended charging cycles. • High efficiency – effective energy utilization reduces charging time. • Versatile usage – suitable for conventional lead-acid batteries. • Includes mains plug – ready for immediate use without additional adapters. • Compact, robust construction – ideal for tough industrial environments. Technical Data • Nominal voltage: 80 V DC • Input voltage: three-phase • Maximum charging current: 100 A • Dimensions (L×W×H): 400 × 600 × 600 mm • Weight: approx. 92 kg Typical Applications • Forklifts & industrial trucks • Pallet trucks & cleaning machines • Lifting platforms & workshop equipment • Industrial & logistics applications • Stationary energy systems Cedpfx Afsx Sat Ujtjgp This charger combines efficient technology with high operational safety and is ideal for charging 80V forklift and traction batteries in professional applications.

Condition: new, Charger 48V – 100A for Forklift Batteries Professional industrial charger for 48 V traction batteries. This high-quality charger, offering 48 V and 100A, is ideal for the safe, efficient, and gentle charging of forklift and traction batteries. Thanks to state-of-the-art technology, it operates significantly more energy-efficiently than comparable models, making it perfect for continuous daily use in industrial, logistics, and workshop environments. Its compact design and robust protective features make this charger a reliable solution for demanding applications. Supplied with a mains power plug; the battery connector is not included but is available optionally. Your benefits at a glance • Efficient technology – saves energy and reduces electricity consumption compared to conventional chargers. • Soft-start function – minimizes inrush current and ensures a stable charging start. • Thermal protection – prevents overheating during extended charging cycles. • High efficiency – optimizes energy use and reduces charging times. • Flexible application – suitable for conventional lead-acid batteries. • Includes power plug – ready to use immediately with no extra adapters required. • Compact, robust construction – ideal for tough industrial environments. Technical Data Csdpfx Afsx Sat Istogp • Nominal voltage: 48 V DC • Input voltage: Three-phase • Maximum charging current: 100 A • Dimensions (L×W×H): 400 × 600 × 600 mm • Weight: approx. 65 kg Typical Applications • Forklifts & industrial trucks • Pallet trucks & cleaning machines • Lifting platforms & workshop equipment • Industrial & logistics applications • Stationary energy systems This charger combines efficient technology with high operational safety and is ideal for charging 48 V forklift and traction batteries in professional settings.

Condition: new, High-frequency charger 48V – 50A for forklift batteries Professional industrial charger for 48 V traction batteries. This high-quality high-frequency charger with 48 V and 50 A is ideal for safe, efficient, and gentle charging of forklift and traction batteries. Thanks to modern high-frequency technology, it operates significantly more energy-efficiently than conventional 50 Hz chargers and is perfectly suited for continuous everyday use in industrial, logistics, and workshop environments. The compact design and solid protection features make this charger a reliable solution for demanding applications. Supplied with power plug (without battery connector; battery connector available as an option). Your advantages at a glance •Efficient high-frequency technology – saves energy and reduces power consumption compared to traditional chargers. •Soft-start function – minimizes inrush currents and ensures a stable start to the charging process. •Thermal protection – prevents overheating during longer charging cycles. Codpfx Afex Satzetjgp •High efficiency – maximizes energy utilization and reduces charging times. •Versatile use – suitable for gel, AGM, and conventional lead-acid batteries. •Incl. mains plug – ready to use immediately, no additional adapters required. •Compact, robust construction – ideal for demanding industrial environments. Technical Data •Nominal voltage: 48 V DC •Maximum charging current: 50 A •Input voltage: 180 – 265 VAC •Protection class: IP66 – dust-tight & protected against powerful water jets •Dimensions (L×W×H): 350 × 170 × 120 mm •Weight: approx. 15 kg Typical areas of application •Forklifts & industrial trucks •Pallet trucks & cleaning machines •Aerial work platforms & workshop equipment •Industrial & logistics applications •Stationary energy systems This high-frequency charger combines efficient high-frequency technology with high operational safety and is excellently suited for charging 48 V forklift and traction batteries in professional applications.

Condition: new, High-frequency charger 24V – 50A for forklift batteries Professional industrial charger for 24V traction batteries. This high-quality high-frequency charger with 24 V and 50 A is ideal for safe, efficient, and gentle charging of forklift and traction batteries. Thanks to modern high-frequency technology, it operates significantly more energy-efficiently than conventional 50Hz chargers and is perfectly suited for continuous daily use in industrial, logistics, and workshop environments. The integrated soft-start function reduces inrush current peaks and ensures a stable start to the charging process. Thermal protection and high efficiency make this charger a reliable solution for multi-shift operations and long charging cycles. Your advantages at a glance Cedpsx Satnjfx Aftjgp • Efficient high-frequency technology – saves energy and reduces power consumption compared to conventional chargers. • Soft start – minimizes inrush peaks for gentle charging. • Thermal protection – protects the device from overheating. • Suitable for lead-acid, GEL & AGM batteries – flexible application depending on charging profile. • High efficiency (≈ 94 %) – efficient energy usage, high power factor (~0.99). • Compact, robust design – durable and ideal for industrial environments. Technical data • Output voltage: 24 V DC • Maximum charging current: 50 A • Recommended battery capacity (C5, 8 h): 300 – 400 Ah • Recommended battery capacity (C5, 12 h): 400 – 500 Ah • Input voltage: 180 – 265 Vac • Protection class: IP66 – dust-tight & protected against powerful water jets • Dimensions (L×W×H): 285 × 167 × 108 mm • Weight: approximately 5.3 kg Typical applications • Forklifts & industrial trucks • Pallet trucks & cleaning machines • Lifting platforms & workshop equipment • Industrial & logistics applications • Stationary energy systems This high-frequency charger combines efficient, state-of-the-art technology with high operational safety and is the perfect solution for charging 24V forklift and traction batteries in professional environments.

Condition: new, Industrial 24V Charger for Forklift Batteries Compact. Robust. Reliable. Our industrial charger for forklift batteries is specifically designed for continuous professional use in industrial, logistics, and workshop environments. With its compact dimensions, easy handling, and exceptionally durable construction, this charger is ideal for the safe and efficient charging of forklift and traction batteries. Featuring advanced resonance technology, combined with high energy efficiency and automatic adaptation to various input voltages, the charger ensures a precise, gentle, and reliable charging cycle—even during mains fluctuations or voltage spikes. Your advantages at a glance • Small & virtually indestructible Compact design with high mechanical resilience—ideal for harsh industrial environments. • High protection rating IP66 / IP67 Dust-tight and protected against powerful water jets as well as temporary immersion according to IEC 60529. Cgsdpfx Afsx Satbjtop • Environmentally friendly & energy-efficient Efficiency of up to 94% thanks to advanced resonance technology. • Wide input voltage range (96–265 VAC) Universally deployable, automatically adapts to different mains voltages. • High operational safety Integrated protection functions against overcharging, short circuit, and incorrect operation. • Easy installation & operation Space-saving wall mounting and intuitive operation in daily use.

Year of construction: 2020, condition: new, For crown capper ø26mm incl. sorting unit, for easy application of the crown capper onto the bottles. Stainless steel construction with mit synthetical sorting unit. capacity approx. 300- 500 B/h also available for ø29mm crowncaps Cgjdpsclq Ufsfx Aftsp

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Cgodsx Iv Tiepfx Aftop Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg, Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm

Condition: used, Crown cap filling bunker with magnetic transport Manufacturer: Gassner Filling capacity: 30,000 bottles/h Additional title: Crown cork hopper with magnetic transport Performance of the filler: 30000 bottles/h Formats: Crown caps and twist off crown caps Material: Housing in stainless steel Position: Free-standing receiving hopper, belt conveyor attached to the wall or ceiling Cedpsw Tmiksfx Aftegp Base construction: Receiving hopper in square tube/smooth sheet construction Features: Receiving hopper, 1 magnetic vertical conveyor, 2 horizontal belt conveyor, 1 electrical control/control cabinet

Condition: used, Year of construction: 1996, Bottle Filler and crown capper, make Krones, type: Mecafill VKV 24/KK 6-94 LM, Codpfx Afeunh I Ajtogp 24 filling valves, Vacuum pump, hot water injection before closing, 6 head bottle cap closing, bottle burst control, Crown Cork feeder + bin electr. height adjustment, direction: counter clockwise / right to left.

Year of construction: 1995, condition: ready for operation (used), A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible. Cgedpfx Aoyhgncsftop

Condition: ready for operation (used), The crown corks are fed manually into the chute, the machine places the crown cork on the bottle and presses it on. Codpsfh Dlrjfx Aftogp

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. Cgodpfx Ajgi Dldeftjp In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW Cgodpfxeh Ranpj Aftep - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Csdpfxswd I Svs Aftogp Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Delem DA 66W, bending force (max.): 234 t, overall weight: 20,000 kg, working length: 4,300 mm, TECHNICAL DETAILS Bending force: 2,300 kN Working length: 4,300 mm Distance between uprights: 3,700 mm MACHINE DETAILS CNC control: Delem DA 66W CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Power: 26 kW Voltage: 230/400 V Weight: 20,000 kg Cgodpfx Afoylwbhotop EQUIPMENT CNC crowning system Hydraulic Wila New Standard upper and lower clamping

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Cgoderuahwopfx Aftsp Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Cgsdpfsrualpjx Aftep Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm Csdpfertrvyjx Aftjgp -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec Cgedpfx Ajyn R Hvsftop return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Offer consist of printer + easyclean postprocessing kit + resin material Technical Machine Benefits • Total print time: 2132 hours 5 minutes • Time since last printer restart: 2905 hours 45 minutes • Total part material used: 74. 5 kg • Total support material used: 67. 2 kg • Layers printed: 295736 • Mco cleaner 2500: 0. 8 kg • Visijet m2 sup: 67. 2 kg • Visijet m2g-cl: 19. 2 kg Cgsdpfx Ajx Nr Thjftep • Visijet m2r-bk: 3. 2 kg • Visijet m2r-gry: 51. 3 kg Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, number of axes: 8, overall weight: 10,500 kg, Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine. • Condition: Overhauled • Bending force: 100 tons • Stroke: 400 mm • Axes: 8 backgauge axes (Y1, Y2, Z1, Z2, X1, X2, R, X) • Crowning/Camber: Yes • CNC control: Delem DA-65 • Main motor: 11 kW • Speeds: • Approach: 200 mm/s • Working: 10 mm/s • Return: 180 mm/s Csdjyrgdfjpfx Aftegp Technical Specification Bending Length 1000 mm

Year of construction: 2003, condition: ready for operation (used), overall weight: 16,300 kg, total width: 3,110 mm, total height: 1,855 mm, pressing force: 23 t, product length (max.): 3,735 mm, stroke length: 275 mm, Hydraulic press manufactured in 2003. This Darley EHP-LS 230.31/25 features a press force of 230 tons and a maximum bending length of 3100 mm. It includes a throat depth of 400 mm and a stroke of 275 mm. The machine is equipped with CNC control and independent hydraulic axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Darley EHP-LS 230.31/25 hydraulic press we have for sale. Contact us for further details. • Technical specifications • Max hydraulic pressure: 250–300 bar • Distance between columns: 2550 mm • Throat depth: 400 mm • Table width: 170 mm • Table height: 900 mm • Max opening: 500 mm • Rapid approach speed: 120 / 140 mm/s • Working speed: 10 mm/s • Oil tank capacity: 200 L • Main drive power: 24.5 kW • Max power consumption: approx. 27–32 kW • Noise level: 72–78 dB(A) • Backgauge • X-axis range: 0–800 mm • Z-axis range: 80–2150 mm • R-axis height adjustment: 190 mm • Accuracy: ±0.05 mm (X/Z), 0.1 mm (R) Csdpfx Afjyrgbkstegp • Positioning speed: • X axis: up to 400 mm/s • Z axis: up to 250 mm/s • R axis: up to 100 mm/s • Number of backgauge fingers: 2 (expandable) • Axes configuration: 6 axes (X1, X2, Z1, Z2, R1, R2) • Equipment / Features • CNC control (commonly Delem DA series) • CNC crowning (table compensation) • Independent Y1/Y2 hydraulic axes • Backgauge with X, R, Z axes • WILA hydraulic upper clamping • Pneumatic lower clamping • Optional front laser safety system Technical Specification Bending Length 3100 mm

Condition: excellent (used), Year of construction: 1992, Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Cgodpfx Ajh U A Iboftep Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.